* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/errno.h>
+
#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-
-#include <asm/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
+
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1200
#define PB1200_INT_END DB1200_INT_END
#endif
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+ /* This is external interrupt cascade */
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
- * Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
- /* Clear all the edge interrupts. This has no effect on level */
+ /* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
- for( ; bisr; bisr &= (bisr-1) )
- {
- extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+ for ( ; bisr; bisr &= bisr - 1) {
+ extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
}
inline void pb1200_enable_irq(unsigned int irq_nr)
{
- bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
- bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
}
-static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+static unsigned int pb1200_setup_cascade(void)
{
- if (++pb1200_cascade_en == 1)
- {
- request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
-#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
- if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
- {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- while(1);
- }
-#endif
+ return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
+}
+
+static unsigned int pb1200_startup_irq(unsigned int irq)
+{
+ if (++pb1200_cascade_en == 1) {
+ int res;
+
+ res = pb1200_setup_cascade();
+ if (res)
+ return res;
}
- pb1200_enable_irq(irq_nr);
+
+ pb1200_enable_irq(irq);
+
return 0;
}
-static void pb1200_shutdown_irq( unsigned int irq_nr )
+static void pb1200_shutdown_irq(unsigned int irq)
{
- pb1200_disable_irq(irq_nr);
+ pb1200_disable_irq(irq);
if (--pb1200_cascade_en == 0)
- {
- free_irq(AU1000_GPIO_7, &pb1200_cascade_handler );
- }
- return;
+ free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
}
-static struct irq_chip external_irq_type =
-{
+static struct irq_chip external_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
void _board_init_irq(void)
{
- int irq_nr;
+ unsigned int irq;
- for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
- {
- set_irq_chip_and_handler(irq_nr, &external_irq_type,
+#ifdef CONFIG_MIPS_PB1200
+ /* We have a problem with CPLD rev 3. */
+ if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ panic("Game over. Your score is 0.");
+ }
+#endif
+
+ for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
+ set_irq_chip_and_handler(irq, &external_irq_type,
handle_level_irq);
- pb1200_disable_irq(irq_nr);
+ pb1200_disable_irq(irq);
}
- /* GPIO_7 can not be hooked here, so it is hooked upon first
- request of any source attached to the cascade */
+ /*
+ * GPIO_7 can not be hooked here, so it is hooked upon first
+ * request of any source attached to the cascade.
+ */
}
-
projects / linux-2.6-omap-h63xx.git / blobdiff