config MACH_DECSTATION
bool "DECstations"
select BOOT_ELF32
+ select CEVT_DS1287
select CEVT_R4K
+ select CSRC_IOASIC
select CSRC_R4K
select CPU_DADDI_WORKAROUNDS if 64BIT
select CPU_R4000_WORKAROUNDS if 64BIT
Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
an FPGA northbridge
-config MIPS_ATLAS
- bool "MIPS Atlas board"
- select BOOT_ELF32
- select BOOT_RAW
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select SYS_HAS_EARLY_PRINTK
- select IRQ_CPU
- select HW_HAS_PCI
- select MIPS_BOARDS_GEN
- select MIPS_BONITO64
- select PCI_GT64XXX_PCI0
- select MIPS_MSC
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_HAS_CPU_NEVADA
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
- select SYS_SUPPORTS_SMARTMIPS
- select GENERIC_HARDIRQS_NO__DO_IRQ
- help
- This enables support for the MIPS Technologies Atlas evaluation
- board.
-
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select IRQ_CPU
+ select IRQ_GIC
select HW_HAS_PCI
select I8253
select I8259
This enables support for the MIPS Technologies Malta evaluation
board.
-config MIPS_SEAD
- bool "MIPS SEAD board"
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_CPU
- select DMA_NONCOHERENT
- select SYS_HAS_EARLY_PRINTK
- select MIPS_BOARDS_GEN
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_SMARTMIPS
- help
- This enables support for the MIPS Technologies SEAD evaluation
- board.
-
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
select GENERIC_HARDIRQS_NO__DO_IRQ
config PNX8550_JBS
- bool "Philips PNX8550 based JBS board"
+ bool "NXP PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_STB810
- bool "Philips PNX8550 based STB810 board"
+ bool "NXP PNX8550 based STB810 board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
Technology and now in turn merged with Fujitsu. Say Y here to
support this machine type.
-config TOSHIBA_JMR3927
- bool "Toshiba JMR-TX3927 board"
- select CEVT_TXX9
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_TX3927
- select IRQ_TXX9
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX39XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
-
-config TOSHIBA_RBTX4927
- bool "Toshiba RBTX49[23]7 board"
- select CEVT_R4K
- select CSRC_R4K
- select CEVT_TXX9
- select DMA_NONCOHERENT
- select HAS_TXX9_SERIAL
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_TXX9
- select I8259 if TOSHIBA_FPCIB0
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX49XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- select GENERIC_HARDIRQS_NO__DO_IRQ
- help
- This Toshiba board is based on the TX4927 processor. Say Y here to
- support this machine type
+config MACH_TX39XX
+ bool "Toshiba TX39 series based machines"
-config TOSHIBA_RBTX4938
- bool "Toshiba RBTX4938 board"
- select CEVT_R4K
- select CSRC_R4K
- select CEVT_TXX9
- select DMA_NONCOHERENT
- select HAS_TXX9_SERIAL
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_TXX9
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX49XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- select GENERIC_HARDIRQS_NO__DO_IRQ
- select GENERIC_GPIO
- help
- This Toshiba board is based on the TX4938 processor. Say Y here to
- support this machine type
+config MACH_TX49XX
+ bool "Toshiba TX49 series based machines"
config WR_PPMC
bool "Wind River PPMC board"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
-source "arch/mips/tx4927/Kconfig"
-source "arch/mips/tx4938/Kconfig"
+source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
endmenu
config CEVT_BCM1480
bool
+config CEVT_DS1287
+ bool
+
config CEVT_GT641XX
bool
config CSRC_BCM1480
bool
+config CSRC_IOASIC
+ bool
+
config CSRC_R4K
bool
config CSRC_SB1250
bool
+config GPIO_TXX9
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
+ bool
+
config CFE
bool
config MIPS_DISABLE_OBSOLETE_IDE
bool
+config SYNC_R4K
+ bool
+
config NO_IOPORT
def_bool n
config IRQ_GT641XX
bool
+config IRQ_GIC
+ bool
+
config MIPS_BOARDS_GEN
bool
config NO_EXCEPT_FILL
bool
-config MIPS_TX3927
- bool
- select HAS_TXX9_SERIAL
-
config MIPS_RM9122
bool
select SERIAL_RM9000
config MIPS_L1_CACHE_SHIFT
int
default "4" if MACH_DECSTATION
- default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
+ default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
default "4" if PMC_MSP4200_EVAL
default "5"
performance should round up your number of processors to the next
power of two.
+config MIPS_CMP
+ bool "MIPS CMP framework support"
+ depends on SMP
+ select SYNC_R4K
+ select SYS_SUPPORTS_SCHED_SMT
+ select WEAK_ORDERING
+ default n
+ help
+ This is a placeholder option for the GCMP work. It will need to
+ be handled differently...
+
source "kernel/time/Kconfig"
#
config TRAD_SIGNALS
bool
-config BINFMT_IRIX
- bool "Include IRIX binary compatibility"
- depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
-
config MIPS32_COMPAT
bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
depends on 64BIT