[MIPS] TXx9: Make single kernel can support multiple boards

[linux-2.6-omap-h63xx.git] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 24c5dee9176872d5358eb228a6228071fe28da25..72baa1a70fcbcd354030ce32fc577f31c128e1ba 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -181,38 +181,6 @@ config LEMOTE_FULONG
          Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
          an FPGA northbridge
 
-config MIPS_ATLAS
-       bool "MIPS Atlas board"
-       select BOOT_ELF32
-       select BOOT_RAW
-       select CEVT_R4K
-       select CSRC_R4K
-       select DMA_NONCOHERENT
-       select SYS_HAS_EARLY_PRINTK
-       select IRQ_CPU
-       select HW_HAS_PCI
-       select MIPS_BOARDS_GEN
-       select MIPS_BONITO64
-       select PCI_GT64XXX_PCI0
-       select MIPS_MSC
-       select RM7000_CPU_SCACHE
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_MIPS32_R1
-       select SYS_HAS_CPU_MIPS32_R2
-       select SYS_HAS_CPU_MIPS64_R1
-       select SYS_HAS_CPU_NEVADA
-       select SYS_HAS_CPU_RM7000
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
-       select SYS_SUPPORTS_SMARTMIPS
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       help
-         This enables support for the MIPS Technologies Atlas evaluation
-         board.
-
 config MIPS_MALTA
        bool "MIPS Malta board"
        select ARCH_MAY_HAVE_PC_FDC
@@ -249,26 +217,6 @@ config MIPS_MALTA
          This enables support for the MIPS Technologies Malta evaluation
          board.
 
-config MIPS_SEAD
-       bool "MIPS SEAD board"
-       select CEVT_R4K
-       select CSRC_R4K
-       select IRQ_CPU
-       select DMA_NONCOHERENT
-       select SYS_HAS_EARLY_PRINTK
-       select MIPS_BOARDS_GEN
-       select SYS_HAS_CPU_MIPS32_R1
-       select SYS_HAS_CPU_MIPS32_R2
-       select SYS_HAS_CPU_MIPS64_R1
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_SMARTMIPS
-       help
-         This enables support for the MIPS Technologies SEAD evaluation
-         board.
-
 config MIPS_SIM
        bool 'MIPS simulator (MIPSsim)'
        select CEVT_R4K
@@ -602,65 +550,11 @@ config SNI_RM
          Technology and now in turn merged with Fujitsu.  Say Y here to
          support this machine type.
 
-config TOSHIBA_JMR3927
-       bool "Toshiba JMR-TX3927 board"
-       select CEVT_TXX9
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-       select MIPS_TX3927
-       select IRQ_TXX9
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_TX39XX
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       select GPIO_TXX9
-
-config TOSHIBA_RBTX4927
-       bool "Toshiba RBTX49[23]7 board"
-       select CEVT_R4K
-       select CSRC_R4K
-       select CEVT_TXX9
-       select DMA_NONCOHERENT
-       select HAS_TXX9_SERIAL
-       select HW_HAS_PCI
-       select IRQ_CPU
-       select IRQ_TXX9
-       select I8259 if TOSHIBA_FPCIB0
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_TX49XX
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       help
-         This Toshiba board is based on the TX4927 processor. Say Y here to
-         support this machine type
+config MACH_TX39XX
+       bool "Toshiba TX39 series based machines"
 
-config TOSHIBA_RBTX4938
-       bool "Toshiba RBTX4938 board"
-       select CEVT_R4K
-       select CSRC_R4K
-       select CEVT_TXX9
-       select DMA_NONCOHERENT
-       select HAS_TXX9_SERIAL
-       select HW_HAS_PCI
-       select IRQ_CPU
-       select IRQ_TXX9
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_TX49XX
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       select GPIO_TXX9
-       help
-         This Toshiba board is based on the TX4938 processor. Say Y here to
-         support this machine type
+config MACH_TX49XX
+       bool "Toshiba TX49 series based machines"
 
 config WR_PPMC
        bool "Wind River PPMC board"
@@ -694,8 +588,7 @@ source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
-source "arch/mips/tx4927/Kconfig"
-source "arch/mips/tx4938/Kconfig"
+source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 
 endmenu
@@ -939,10 +832,6 @@ config PCI_GT64XXX_PCI0
 config NO_EXCEPT_FILL
        bool
 
-config MIPS_TX3927
-       bool
-       select HAS_TXX9_SERIAL
-
 config MIPS_RM9122
        bool
        select SERIAL_RM9000
@@ -2064,10 +1953,6 @@ source "fs/Kconfig.binfmt"
 config TRAD_SIGNALS
        bool
 
-config BINFMT_IRIX
-       bool "Include IRIX binary compatibility"
-       depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
-
 config MIPS32_COMPAT
        bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
        depends on 64BIT