Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN

[linux-2.6-omap-h63xx.git] / arch / blackfin / mach-bf548 / boards / ezkit.c

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 231dfbd3bc1ffcefc1a9c11b94ad885ab1d376d3..af7c211a580eaf0763f3765d0882d15f932f00dd 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -46,6 +46,7 @@
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
+#include <asm/dpmc.h>
 #include <asm/portmux.h>
 #include <asm/mach/bf54x_keys.h>
 #include <linux/input.h>
@@ -411,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
 /* SPI flash chip (m25p16) */
@@ -480,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
        {
@@ -526,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
        [0] = {
@@ -641,13 +641,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-               .type = "pcf8574_lcd",
        },
 #endif
 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-               .type = "pcf8574_keypad",
                .irq = 212,
        },
 #endif
@@ -691,7 +689,38 @@ static struct platform_device bfin_gpios_device = {
        .resource = &bfin_gpios_resources,
 };
 
+static const unsigned int cclk_vlev_datasheet[] =
+{
+/*
+ * Internal VLEV BF54XSBBC1533
+ ****temporarily using these values until data sheet is updated
+ */
+       VRPAIR(VLEV_085, 150000000),
+       VRPAIR(VLEV_090, 250000000),
+       VRPAIR(VLEV_110, 276000000),
+       VRPAIR(VLEV_115, 301000000),
+       VRPAIR(VLEV_120, 525000000),
+       VRPAIR(VLEV_125, 550000000),
+       VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+       .tuple_tab = cclk_vlev_datasheet,
+       .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+       .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+       .name = "bfin dpmc",
+       .dev = {
+               .platform_data = &bfin_dmpc_vreg_data,
+       },
+};
+
 static struct platform_device *ezkit_devices[] __initdata = {
+
+       &bfin_dpmc,
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
        &rtc_device,
 #endif
@@ -770,10 +799,7 @@ static int __init ezkit_init(void)
 
        platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bf54x_spi_board_info,
-                       ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
        return 0;
 }