[AVR32] Add support for ATSTK1003 and ATSTK1004

[linux-2.6-omap-h63xx.git] / arch / avr32 / boards / atstk1000 / Kconfig

diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index 23e8c84f023732c88799c5d3aed5416c2ba16551..28c47802a560b3c259a1cef746ef739abd8ff836 100644 (file)
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -1,34 +1,34 @@
 # STK1000 customization
 
-if BOARD_ATSTK1002
+if BOARD_ATSTK1000
 
-config BOARD_ATSTK1002_CUSTOM
-       bool "Non-default STK-1002 jumper settings"
+config BOARD_ATSTK100X_CUSTOM
+       bool "Non-default STK1002/STK1003/STK1004 jumper settings"
        help
          You will normally leave the jumpers on the CPU card at their
          default settings.  If you need to use certain peripherals,
          you will need to change some of those jumpers.
 
-if BOARD_ATSTK1002_CUSTOM
+if BOARD_ATSTK100X_CUSTOM
 
-config BOARD_ATSTK1002_SW1_CUSTOM
+config BOARD_ATSTK100X_SW1_CUSTOM
        bool "SW1: use SSC1 (not SPI0)"
        help
          This also prevents using the external DAC as an audio interface,
          and means you can't initialize the on-board QVGA display.
 
-config BOARD_ATSTK1002_SW2_CUSTOM
+config BOARD_ATSTK100X_SW2_CUSTOM
        bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
        help
          If you change this you'll want an updated boot loader putting
          the console on UART-C not UART-A.
 
-config BOARD_ATSTK1002_SW3_CUSTOM
+config BOARD_ATSTK100X_SW3_CUSTOM
        bool "SW3: use TIMER1 (not SSC0 and GCLK)"
        help
          This also prevents using the external DAC as an audio interface.
 
-config BOARD_ATSTK1002_SW4_CUSTOM
+config BOARD_ATSTK100X_SW4_CUSTOM
        bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
        help
          To use the camera interface you'll need a custom card (on the
@@ -36,15 +36,17 @@ config BOARD_ATSTK1002_SW4_CUSTOM
 
 config BOARD_ATSTK1002_SW5_CUSTOM
        bool "SW5: use MACB1 (not LCDC)"
+       depends on BOARD_ATSTK1002
 
 config BOARD_ATSTK1002_SW6_CUSTOM
        bool "SW6: more GPIOs (not MACB0)"
+       depends on BOARD_ATSTK1002
 
 endif  # custom
 
-config BOARD_ATSTK1002_SPI1
+config BOARD_ATSTK100X_SPI1
        bool "Configure SPI1 controller"
-       depends on !BOARD_ATSTK1002_SW4_CUSTOM
+       depends on !BOARD_ATSTK100X_SW4_CUSTOM
        help
          All the signals for the second SPI controller are available on
          GPIO lines and accessed through the J1 jumper block.  Say "y"
@@ -56,7 +58,7 @@ config BOARD_ATSTK1000_J2_LED
 
 choice
        prompt "LEDs connected to J2:"
-       depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
+       depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
        optional
        help
          Select this if you have jumpered the J2 jumper block to the
@@ -78,7 +80,7 @@ endchoice
 
 config BOARD_ATSTK1000_EXTDAC
        bool
-       depends on !BOARD_ATSTK1002_SW1_CUSTOM && !BOARD_ATSTK1002_SW3_CUSTOM
+       depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
        default y
 
-endif  # stk 1002
+endif  # stk 1000