.pu_pd_val = pull_mode, \
},
-
-#define PULL_DISABLED 0
-#define PULL_ENABLED 1
-
-#define PULL_DOWN 0
-#define PULL_UP 1
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA (1 << 3)
+#define OMAP2_PULL_UP (1 << 4)
+#define OMAP2_ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN (1 << 8)
+#define OMAP3_OFF_EN (1 << 9)
+#define OMAP3_OFFOUT_EN (1 << 10)
+#define OMAP3_OFFOUT_VAL (1 << 11)
+#define OMAP3_OFF_PULL_EN (1 << 12)
+#define OMAP3_OFF_PULL_UP (1 << 13)
+#define OMAP3_WAKEUP_EN (1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP34XX_MUX_MODE0 0
+#define OMAP34XX_MUX_MODE1 1
+#define OMAP34XX_MUX_MODE2 2
+#define OMAP34XX_MUX_MODE3 3
+#define OMAP34XX_MUX_MODE4 4
+#define OMAP34XX_MUX_MODE5 5
+#define OMAP34XX_MUX_MODE6 6
+#define OMAP34XX_MUX_MODE7 7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT 0
+#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+ | OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE 0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+ | OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+ | OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
+ .name = desc, \
+ .debug = 0, \
+ .mux_reg = reg_offset, \
+ .mux_val = mux_value \
+},
struct pin_config {
- char *name;
- unsigned char busy;
- unsigned char debug;
+ char *name;
+ const unsigned int mux_reg;
+ unsigned char debug;
- const char *mux_reg_name;
- const unsigned int mux_reg;
+#if defined(CONFIG_ARCH_OMAP34XX)
+ u16 mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
+#endif
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ const char *mux_reg_name;
+#endif
+
};
enum omap730_index {
AC7_2430_USB0HS_DATA7,
/* 2430 McBSP */
+ AD6_2430_MCBSP_CLKS,
+
+ AB2_2430_MCBSP1_CLKR,
+ AD5_2430_MCBSP1_FSR,
+ AA1_2430_MCBSP1_DX,
+ AF3_2430_MCBSP1_DR,
+ AB3_2430_MCBSP1_FSX,
+ Y9_2430_MCBSP1_CLKX,
+
AC10_2430_MCBSP2_FSX,
AD16_2430_MCBSP2_CLX,
AE13_2430_MCBSP2_DX,
AE13_2430_MCBSP2_DX_OFF,
AD13_2430_MCBSP2_DR_OFF,
+ AC9_2430_MCBSP3_CLKX,
+ AE4_2430_MCBSP3_FSX,
+ AE2_2430_MCBSP3_DR,
+ AF4_2430_MCBSP3_DX,
+
+ N3_2430_MCBSP4_CLKX,
+ AD23_2430_MCBSP4_DR,
+ AB25_2430_MCBSP4_DX,
+ AC25_2430_MCBSP4_FSX,
+
+ AE16_2430_MCBSP5_CLKX,
+ AF12_2430_MCBSP5_FSX,
+ K7_2430_MCBSP5_DX,
+ M1_2430_MCBSP5_DR,
+
+ /* 2430 McSPI*/
+ Y18_2430_MCSPI1_CLK,
+ AD15_2430_MCSPI1_SIMO,
+ AE17_2430_MCSPI1_SOMI,
+ U1_2430_MCSPI1_CS0,
+
+ /* Touchscreen GPIO */
+ AF19_2430_GPIO_85,
+
+};
+
+enum omap34xx_index {
+ /* 34xx I2C */
+ K21_34XX_I2C1_SCL,
+ J21_34XX_I2C1_SDA,
+ AF15_34XX_I2C2_SCL,
+ AE15_34XX_I2C2_SDA,
+ AF14_34XX_I2C3_SCL,
+ AG14_34XX_I2C3_SDA,
+ AD26_34XX_I2C4_SCL,
+ AE26_34XX_I2C4_SDA,
+
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+ Y8_3430_USB1HS_PHY_CLK,
+ Y9_3430_USB1HS_PHY_STP,
+ AA14_3430_USB1HS_PHY_DIR,
+ AA11_3430_USB1HS_PHY_NXT,
+ W13_3430_USB1HS_PHY_DATA0,
+ W12_3430_USB1HS_PHY_DATA1,
+ W11_3430_USB1HS_PHY_DATA2,
+ Y11_3430_USB1HS_PHY_DATA3,
+ W9_3430_USB1HS_PHY_DATA4,
+ Y12_3430_USB1HS_PHY_DATA5,
+ W8_3430_USB1HS_PHY_DATA6,
+ Y13_3430_USB1HS_PHY_DATA7,
+
+ /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+ AA8_3430_USB2HS_PHY_CLK,
+ AA10_3430_USB2HS_PHY_STP,
+ AA9_3430_USB2HS_PHY_DIR,
+ AB11_3430_USB2HS_PHY_NXT,
+ AB10_3430_USB2HS_PHY_DATA0,
+ AB9_3430_USB2HS_PHY_DATA1,
+ W3_3430_USB2HS_PHY_DATA2,
+ T4_3430_USB2HS_PHY_DATA3,
+ T3_3430_USB2HS_PHY_DATA4,
+ R3_3430_USB2HS_PHY_DATA5,
+ R4_3430_USB2HS_PHY_DATA6,
+ T2_3430_USB2HS_PHY_DATA7,
+
+
+ /* TLL - HSUSB: 12-pin TLL Port 1*/
+ Y8_3430_USB1HS_TLL_CLK,
+ Y9_3430_USB1HS_TLL_STP,
+ AA14_3430_USB1HS_TLL_DIR,
+ AA11_3430_USB1HS_TLL_NXT,
+ W13_3430_USB1HS_TLL_DATA0,
+ W12_3430_USB1HS_TLL_DATA1,
+ W11_3430_USB1HS_TLL_DATA2,
+ Y11_3430_USB1HS_TLL_DATA3,
+ W9_3430_USB1HS_TLL_DATA4,
+ Y12_3430_USB1HS_TLL_DATA5,
+ W8_3430_USB1HS_TLL_DATA6,
+ Y13_3430_USB1HS_TLL_DATA7,
+
+ /* TLL - HSUSB: 12-pin TLL Port 2*/
+ AA8_3430_USB2HS_TLL_CLK,
+ AA10_3430_USB2HS_TLL_STP,
+ AA9_3430_USB2HS_TLL_DIR,
+ AB11_3430_USB2HS_TLL_NXT,
+ AB10_3430_USB2HS_TLL_DATA0,
+ AB9_3430_USB2HS_TLL_DATA1,
+ W3_3430_USB2HS_TLL_DATA2,
+ T4_3430_USB2HS_TLL_DATA3,
+ T3_3430_USB2HS_TLL_DATA4,
+ R3_3430_USB2HS_TLL_DATA5,
+ R4_3430_USB2HS_TLL_DATA6,
+ T2_3430_USB2HS_TLL_DATA7,
+
+ /* TLL - HSUSB: 12-pin TLL Port 3*/
+ AA6_3430_USB3HS_TLL_CLK,
+ AB3_3430_USB3HS_TLL_STP,
+ AA3_3430_USB3HS_TLL_DIR,
+ Y3_3430_USB3HS_TLL_NXT,
+ AA5_3430_USB3HS_TLL_DATA0,
+ Y4_3430_USB3HS_TLL_DATA1,
+ Y5_3430_USB3HS_TLL_DATA2,
+ W5_3430_USB3HS_TLL_DATA3,
+ AB12_3430_USB3HS_TLL_DATA4,
+ AB13_3430_USB3HS_TLL_DATA5,
+ AA13_3430_USB3HS_TLL_DATA6,
+ AA12_3430_USB3HS_TLL_DATA7,
+
+ /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+ AF10_3430_USB1FS_PHY_MM1_RXDP,
+ AG9_3430_USB1FS_PHY_MM1_RXDM,
+ W13_3430_USB1FS_PHY_MM1_RXRCV,
+ W12_3430_USB1FS_PHY_MM1_TXSE0,
+ W11_3430_USB1FS_PHY_MM1_TXDAT,
+ Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+ AF7_3430_USB2FS_PHY_MM2_RXDP,
+ AH7_3430_USB2FS_PHY_MM2_RXDM,
+ AB10_3430_USB2FS_PHY_MM2_RXRCV,
+ AB9_3430_USB2FS_PHY_MM2_TXSE0,
+ W3_3430_USB2FS_PHY_MM2_TXDAT,
+ T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+ AH3_3430_USB3FS_PHY_MM3_RXDP,
+ AE3_3430_USB3FS_PHY_MM3_RXDM,
+ AD1_3430_USB3FS_PHY_MM3_RXRCV,
+ AE1_3430_USB3FS_PHY_MM3_TXSE0,
+ AD2_3430_USB3FS_PHY_MM3_TXDAT,
+ AC1_3430_USB3FS_PHY_MM3_TXEN_N,
+
+ /* 34xx GPIO
+ * - normally these are bidirectional, no internal pullup/pulldown
+ * - "_UP" suffix (GPIO3_UP) if internal pullup is configured
+ * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
+ * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
+ */
+ AH8_34XX_GPIO29,
+ J25_34XX_GPIO170,
};
struct omap_mux_cfg {
projects / linux-2.6-omap-h63xx.git / blobdiff