Add MCSPI1 and gpio_85 Mux configuration

[linux-2.6-omap-h63xx.git] / arch / arm / plat-omap / include / mach / mux.h

diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 5670d563f378893cf246468e0eb30ddcba245098..210b49397136f58e305410818342cb5a5e44c950 100644 (file)
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -641,6 +641,15 @@ enum omap24xx_index {
        AE13_2430_MCBSP2_DX_OFF,
        AD13_2430_MCBSP2_DR_OFF,
 
+       /* 2430 McSPI*/
+       Y18_2430_MCSPI1_CLK,
+       AD15_2430_MCSPI1_SIMO,
+       AE17_2430_MCSPI1_SOMI,
+       U1_2430_MCSPI1_CS0,
+
+       /* Touchscreen GPIO */
+       AF19_2430_GPIO_85,
+
 };
 
 enum omap34xx_index {
@@ -723,8 +732,40 @@ enum omap34xx_index {
        AB12_3430_USB3HS_TLL_DATA4,
        AB13_3430_USB3HS_TLL_DATA5,
        AA13_3430_USB3HS_TLL_DATA6,
-       AA12_3430_USB3HS_TLL_DATA7
-
+       AA12_3430_USB3HS_TLL_DATA7,
+
+       /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+       AF10_3430_USB1FS_PHY_MM1_RXDP,
+       AG9_3430_USB1FS_PHY_MM1_RXDM,
+       W13_3430_USB1FS_PHY_MM1_RXRCV,
+       W12_3430_USB1FS_PHY_MM1_TXSE0,
+       W11_3430_USB1FS_PHY_MM1_TXDAT,
+       Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+       /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+       AF7_3430_USB2FS_PHY_MM2_RXDP,
+       AH7_3430_USB2FS_PHY_MM2_RXDM,
+       AB10_3430_USB2FS_PHY_MM2_RXRCV,
+       AB9_3430_USB2FS_PHY_MM2_TXSE0,
+       W3_3430_USB2FS_PHY_MM2_TXDAT,
+       T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+       /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+       AH3_3430_USB3FS_PHY_MM3_RXDP,
+       AE3_3430_USB3FS_PHY_MM3_RXDM,
+       AD1_3430_USB3FS_PHY_MM3_RXRCV,
+       AE1_3430_USB3FS_PHY_MM3_TXSE0,
+       AD2_3430_USB3FS_PHY_MM3_TXDAT,
+       AC1_3430_USB3FS_PHY_MM3_TXEN_N,
+
+       /* 34xx GPIO
+        *  - normally these are bidirectional, no internal pullup/pulldown
+        *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
+        *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
+        *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
+        */
+       AH8_34XX_GPIO29,
+       J25_34XX_GPIO170,
 };
 
 struct omap_mux_cfg {