#define INT_730_GPIO_BANK6 18
#define INT_730_SPGIO_WR 29
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_850_IH2_FIQ 0
+#define INT_850_IH2_IRQ 1
+#define INT_850_USB_NON_ISO 2
+#define INT_850_USB_ISO 3
+#define INT_850_ICR 4
+#define INT_850_EAC 5
+#define INT_850_GPIO_BANK1 6
+#define INT_850_GPIO_BANK2 7
+#define INT_850_GPIO_BANK3 8
+#define INT_850_McBSP2TX 10
+#define INT_850_McBSP2RX 11
+#define INT_850_McBSP2RX_OVF 12
+#define INT_850_LCD_LINE 14
+#define INT_850_GSM_PROTECT 15
+#define INT_850_TIMER3 16
+#define INT_850_GPIO_BANK5 17
+#define INT_850_GPIO_BANK6 18
+#define INT_850_SPGIO_WR 29
+
+
/*
* IRQ numbers for interrupt handler 2
*
#define INT_730_DMA_CH15 (62 + IH2_BASE)
#define INT_730_NAND (63 + IH2_BASE)
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_850_HW_ERRORS (0 + IH2_BASE)
+#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_850_CFCD (2 + IH2_BASE)
+#define INT_850_CFIREQ (3 + IH2_BASE)
+#define INT_850_I2C (4 + IH2_BASE)
+#define INT_850_PCC (5 + IH2_BASE)
+#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_850_SPI_100K_1 (7 + IH2_BASE)
+#define INT_850_SYREN_SPI (8 + IH2_BASE)
+#define INT_850_VLYNQ (9 + IH2_BASE)
+#define INT_850_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_850_McBSP1TX (11 + IH2_BASE)
+#define INT_850_McBSP1RX (12 + IH2_BASE)
+#define INT_850_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_850_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_850_MCSI (16 + IH2_BASE)
+#define INT_850_uWireTX (17 + IH2_BASE)
+#define INT_850_uWireRX (18 + IH2_BASE)
+#define INT_850_SMC_CD (19 + IH2_BASE)
+#define INT_850_SMC_IREQ (20 + IH2_BASE)
+#define INT_850_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_850_TIMER32K (22 + IH2_BASE)
+#define INT_850_MMC_SDIO (23 + IH2_BASE)
+#define INT_850_UPLD (24 + IH2_BASE)
+#define INT_850_USB_HHC_1 (27 + IH2_BASE)
+#define INT_850_USB_HHC_2 (28 + IH2_BASE)
+#define INT_850_USB_GENI (29 + IH2_BASE)
+#define INT_850_USB_OTG (30 + IH2_BASE)
+#define INT_850_CAMERA_IF (31 + IH2_BASE)
+#define INT_850_RNG (32 + IH2_BASE)
+#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_850_DBB_RF_EN (34 + IH2_BASE)
+#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_850_SHA1_MD5 (36 + IH2_BASE)
+#define INT_850_SPI_100K_2 (37 + IH2_BASE)
+#define INT_850_RNG_IDLE (38 + IH2_BASE)
+#define INT_850_MPUIO (39 + IH2_BASE)
+#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_850_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_850_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_850_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_850_DMA_CH6 (53 + IH2_BASE)
+#define INT_850_DMA_CH7 (54 + IH2_BASE)
+#define INT_850_DMA_CH8 (55 + IH2_BASE)
+#define INT_850_DMA_CH9 (56 + IH2_BASE)
+#define INT_850_DMA_CH10 (57 + IH2_BASE)
+#define INT_850_DMA_CH11 (58 + IH2_BASE)
+#define INT_850_DMA_CH12 (59 + IH2_BASE)
+#define INT_850_DMA_CH13 (60 + IH2_BASE)
+#define INT_850_DMA_CH14 (61 + IH2_BASE)
+#define INT_850_DMA_CH15 (62 + IH2_BASE)
+#define INT_850_NAND (63 + IH2_BASE)
+
#define INT_24XX_SYS_NIRQ 7
#define INT_24XX_SDMA_IRQ0 12
#define INT_24XX_SDMA_IRQ1 13
#define INT_34XX_BENCH_MPU_EMUL 3
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
/* External TWL4030 gpio interrupts are optional */
#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
-#ifdef CONFIG_TWL4030_GPIO
+#ifdef CONFIG_GPIO_TWL4030
#define TWL4030_GPIO_NR_IRQS 18
#else
#define TWL4030_GPIO_NR_IRQS 0