[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

[linux-2.6-omap-h63xx.git] / arch / arm / plat-omap / include / mach / board.h

diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644 (file)
index 0000000..5444564
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004 Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK         0x4f01
+#define OMAP_TAG_MMC           0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB           0x4f04
+#define OMAP_TAG_LCD           0x4f05
+#define OMAP_TAG_GPIO_SWITCH   0x4f06
+#define OMAP_TAG_UART          0x4f07
+#define OMAP_TAG_FBMEM         0x4f08
+#define OMAP_TAG_STI_CONSOLE   0x4f09
+#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART    0x4f81
+#define OMAP_TAG_VERSION_STR   0x4f82
+
+struct omap_clock_config {
+       /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+       u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+       unsigned enabled:1;
+       /* nomux means "standard" muxing is wrong on this board, and that
+        * board-specific code handled it before common init logic.
+        */
+       unsigned nomux:1;
+       /* switch pin can be for card detect (default) or card cover */
+       unsigned cover:1;
+       /* 4 wire signaling is optional, and is only used for SD/SDIO */
+       unsigned wire4:1;
+       s16 power_pin;
+       s16 switch_pin;
+       s16 wp_pin;
+};
+
+struct omap_mmc_config {
+       struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+       u8 console_uart;
+       u32 console_speed;
+};
+
+struct omap_sti_console_config {
+       unsigned enable:1;
+       u8 channel;
+};
+
+struct omap_camera_sensor_config {
+       u16 reset_gpio;
+       int (*power_on)(void * data);
+       int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+       /* Configure drivers according to the connectors on your board:
+        *  - "A" connector (rectagular)
+        *      ... for host/OHCI use, set "register_host".
+        *  - "B" connector (squarish) or "Mini-B"
+        *      ... for device/gadget use, set "register_dev".
+        *  - "Mini-AB" connector (very similar to Mini-B)
+        *      ... for OTG use as device OR host, initialize "otg"
+        */
+       unsigned        register_host:1;
+       unsigned        register_dev:1;
+       u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+       u8              hmc_mode;
+
+       /* implicitly true if otg:  host supports remote wakeup? */
+       u8              rwc;
+
+       /* signaling pins used to talk to transceiver on usbN:
+        *  0 == usbN unused
+        *  2 == usb0-only, using internal transceiver
+        *  3 == 3 wire bidirectional
+        *  4 == 4 wire bidirectional
+        *  6 == 6 wire unidirectional (or TLL)
+        */
+       u8              pins[3];
+};
+
+struct omap_lcd_config {
+       char panel_name[16];
+       char ctrl_name[16];
+       s16  nreset_gpio;
+       u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+       int default_intensity;
+       int (*set_power)(struct device *dev, int state);
+       int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+       u32 start;
+       u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+       const char *name;
+       int intensity_timer;
+       int blink_timer;
+       void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+       char name[12];
+       u16 gpio;
+       int flags:4;
+       int type:4;
+       int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+       /* Bit field of UARTs present; bit 0 --> UART1 */
+       unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+       char part_table[0];
+};
+
+struct omap_boot_reason_config {
+       char reason_str[12];
+};
+
+struct omap_version_config {
+       char component[12];
+       char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+       u16 tag;
+       u16 len;
+       u8  data[0];
+};
+
+struct omap_board_config_kernel {
+       u16 tag;
+       const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+       ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+       ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif