#include <asm/cputype.h>
#include <asm/mach-types.h>
+#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_NONCACHED] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
}
+ /*
+ * Non-cacheable Normal - intended for memory areas that must
+ * not cause dirty cache line writebacks when used
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6) {
+ if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+ /* Non-cacheable Normal is XCB = 001 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_BUFFERED;
+ } else {
+ /* For both ARMv6 and non-TEX-remapping ARMv7 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_TEX(1);
+ }
+ } else {
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
"vmalloc area too small, limiting to %luMB\n",
vmalloc_reserve >> 20);
}
+
+ if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
+ vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
+ printk(KERN_WARNING
+ "vmalloc area is too big, limiting to %luMB\n",
+ vmalloc_reserve >> 20);
+ }
}
__early_param("vmalloc=", early_vmalloc);
#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
-static int __init check_membank_valid(struct membank *mb)
+static void __init sanity_check_meminfo(void)
{
- /*
- * Check whether this memory region has non-zero size or
- * invalid node number.
- */
- if (mb->size == 0 || mb->node >= MAX_NUMNODES)
- return 0;
-
- /*
- * Check whether this memory region would entirely overlap
- * the vmalloc area.
- */
- if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
- printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
- "(vmalloc region overlap).\n",
- mb->start, mb->start + mb->size - 1);
- return 0;
- }
-
- /*
- * Check whether this memory region would partially overlap
- * the vmalloc area.
- */
- if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
- phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
- unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
-
- printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
- "to -%.8lx (vmalloc region overlap).\n",
- mb->start, mb->start + mb->size - 1,
- mb->start + newsize - 1);
- mb->size = newsize;
- }
+ int i, j;
- return 1;
-}
+ for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
+ struct membank *bank = &meminfo.bank[j];
+ *bank = meminfo.bank[i];
-static void __init sanity_check_meminfo(struct meminfo *mi)
-{
- int i, j;
+#ifdef CONFIG_HIGHMEM
+ /*
+ * Split those memory banks which are partially overlapping
+ * the vmalloc area greatly simplifying things later.
+ */
+ if (__va(bank->start) < VMALLOC_MIN &&
+ bank->size > VMALLOC_MIN - __va(bank->start)) {
+ if (meminfo.nr_banks >= NR_BANKS) {
+ printk(KERN_CRIT "NR_BANKS too low, "
+ "ignoring high memory\n");
+ } else {
+ memmove(bank + 1, bank,
+ (meminfo.nr_banks - i) * sizeof(*bank));
+ meminfo.nr_banks++;
+ i++;
+ bank[1].size -= VMALLOC_MIN - __va(bank->start);
+ bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+ j++;
+ }
+ bank->size = VMALLOC_MIN - __va(bank->start);
+ }
+#else
+ /*
+ * Check whether this memory bank would entirely overlap
+ * the vmalloc area.
+ */
+ if (__va(bank->start) >= VMALLOC_MIN) {
+ printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+ "(vmalloc region overlap).\n",
+ bank->start, bank->start + bank->size - 1);
+ continue;
+ }
- for (i = 0, j = 0; i < mi->nr_banks; i++) {
- if (check_membank_valid(&mi->bank[i]))
- mi->bank[j++] = mi->bank[i];
+ /*
+ * Check whether this memory bank would partially overlap
+ * the vmalloc area.
+ */
+ if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+ __va(bank->start + bank->size) < __va(bank->start)) {
+ unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+ printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+ "to -%.8lx (vmalloc region overlap).\n",
+ bank->start, bank->start + bank->size - 1,
+ bank->start + newsize - 1);
+ bank->size = newsize;
+ }
+#endif
+ j++;
}
- mi->nr_banks = j;
+ meminfo.nr_banks = j;
}
-static inline void prepare_page_table(struct meminfo *mi)
+static inline void prepare_page_table(void)
{
unsigned long addr;
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
- addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+ addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
#endif
for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
* Clear out all the kernel space mappings, except for the first
* memory bank, up to the end of the vmalloc region.
*/
- for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+ for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
addr < VMALLOC_END; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
}
* Note that this can only be in node 0.
*/
#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start,
+ reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
BOOTMEM_DEFAULT);
#else
- reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext,
+ reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
BOOTMEM_DEFAULT);
#endif
* Allocate the vector page early.
*/
vectors = alloc_bootmem_low_pages(PAGE_SIZE);
- BUG_ON(!vectors);
for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
map.virtual = MODULES_VADDR;
- map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+ map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
map.type = MT_ROM;
create_mapping(&map);
#endif
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+void __init paging_init(struct machine_desc *mdesc)
{
void *zero_page;
build_mem_type_table();
- sanity_check_meminfo(mi);
- prepare_page_table(mi);
- bootmem_init(mi);
+ sanity_check_meminfo();
+ prepare_page_table();
+ bootmem_init();
devicemaps_init(mdesc);
top_pmd = pmd_off_k(0xffff0000);
/*
- * allocate the zero page. Note that we count on this going ok.
+ * allocate the zero page. Note that this always succeeds and
+ * returns a zeroed result.
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
- memzero(zero_page, PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
flush_dcache_page(empty_zero_page);
}
projects / linux-2.6-omap-h63xx.git / blobdiff