#include <linux/string.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <linux/mtd/map.h>
#include <asm/mach/irq.h>
#include <asm/setup.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/s3c2410.h>
-#include <asm/plat-s3c24xx/s3c2440.h>
-#include <asm/plat-s3c24xx/clock.h>
-#include <asm/plat-s3c24xx/devs.h>
-#include <asm/plat-s3c24xx/cpu.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2440.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
&nexcoder_device_nor,
};
-static struct s3c24xx_board nexcoder_board __initdata = {
- .devices = nexcoder_devices,
- .devices_count = ARRAY_SIZE(nexcoder_devices),
-};
-
-
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
- s3c24xx_set_board(&nexcoder_board);
+
nexcoder_sensorboard_init();
}
+static void __init nexcoder_init(void)
+{
+ platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
+};
MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = nexcoder_map_io,
+ .init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
MACHINE_END