#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <asm/plat-s3c/regs-serial.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
-#include <asm/arch/udc.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
+#include <asm/plat-s3c24xx/udc.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
/**
* Set lcd on or off
**/
-static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
- .fixed_syncs= 1,
- .regs={
- .lcdcon1= S3C2410_LCDCON1_TFT16BPP | \
- S3C2410_LCDCON1_TFT | \
- S3C2410_LCDCON1_CLKVAL(0x0C),
-
- .lcdcon2= S3C2410_LCDCON2_VBPD(7) | \
- S3C2410_LCDCON2_LINEVAL(319) | \
- S3C2410_LCDCON2_VFPD(6) | \
- S3C2410_LCDCON2_VSPW(0),
-
- .lcdcon3= S3C2410_LCDCON3_HBPD(19) | \
- S3C2410_LCDCON3_HOZVAL(239) | \
- S3C2410_LCDCON3_HFPD(7),
-
- .lcdcon4= S3C2410_LCDCON4_MVAL(0) | \
- S3C2410_LCDCON4_HSPW(3),
-
- .lcdcon5= S3C2410_LCDCON5_FRM565 | \
- S3C2410_LCDCON5_INVVLINE | \
- S3C2410_LCDCON5_HWSWP,
- },
+static struct s3c2410fb_display h1940_lcd __initdata = {
+ .lcdcon5= S3C2410_LCDCON5_FRM565 | \
+ S3C2410_LCDCON5_INVVLINE | \
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 20,
+ .right_margin = 8,
+ .hsync_len = 4,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .vsync_len = 1,
+};
+
+static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
+ .displays = &h1940_lcd,
+ .num_displays = 1,
+ .default_display = 0,
+
.lpcsel= 0x02,
.gpccon= 0xaa940659,
.gpccon_mask= 0xffffffff,
.gpdcon_mask= 0xffffffff,
.gpdup= 0x0000faff,
.gpdup_mask= 0xffffffff,
-
- .width= 240,
- .height= 320,
- .xres= {240,240,240},
- .yres= {320,320,320},
- .bpp= {16,16,16},
};
static struct platform_device s3c_device_leds = {
{
u32 tmp;
- s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
/* Turn off suspend on both USB ports, and switch the