#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
+#include <linux/input.h>
#include <asm/setup.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/i2c.h>
#include <mach/hardware.h>
+#include <mach/pxa27x_keypad.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa-regs.h>
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
- /* STUART */
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* For A780 support (connected with Neptune GSM chip) */
- GPIO30_USB_P3_2, /* ICL_TXENB */
- GPIO31_USB_P3_6, /* ICL_VPOUT */
- GPIO90_USB_P3_5, /* ICL_VPIN */
- GPIO91_USB_P3_1, /* ICL_XRXD */
- GPIO56_USB_P3_4, /* ICL_VMOUT */
- GPIO113_USB_P3_3, /* /ICL_VMIN */
-
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
+
+ /* PCAP SSP */
+ GPIO29_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* pcap chip select */
+ GPIO1_GPIO, /* pcap interrupt */
+ GPIO4_GPIO, /* WDI_AP */
+ GPIO55_GPIO, /* SYS_RESTART */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO11_GPIO, /* mmc detect */
+
+ /* usb to external transceiver */
+ GPIO34_USB_P2_2,
+ GPIO35_USB_P2_1,
+ GPIO36_USB_P2_4,
+ GPIO39_USB_P2_6,
+ GPIO40_USB_P2_5,
+ GPIO53_USB_P2_3,
+
+ /* usb to Neptune GSM chip */
+ GPIO30_USB_P3_2,
+ GPIO31_USB_P3_6,
+ GPIO90_USB_P3_5,
+ GPIO91_USB_P3_1,
+ GPIO56_USB_P3_4,
+ GPIO113_USB_P3_3,
+};
+
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
+static unsigned long gen1_pin_config[] __initdata = {
+ /* flip / lockswitch */
+ GPIO12_GPIO,
+
+ /* bluetooth (bcm2035) */
+ GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO48_GPIO, /* RESET */
+ GPIO28_GPIO, /* WAKEUP */
+
+ /* Neptune handshake */
+ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
+ GPIO57_GPIO, /* AP_RDY */
+ GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
+ GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
+ GPIO82_GPIO, /* RESET */
+ GPIO99_GPIO, /* TC_MM_EN */
+
+ /* sound */
+ GPIO52_SSP3_SCLK,
+ GPIO83_SSP3_SFRM,
+ GPIO81_SSP3_TXD,
+ GPIO89_SSP3_RXD,
+
+ /* ssp2 pins to in */
+ GPIO22_GPIO, /* SSP2_SCLK */
+ GPIO37_GPIO, /* SSP2_SFRM */
+ GPIO38_GPIO, /* SSP2_TXD */
+ GPIO88_GPIO, /* SSP2_RXD */
+
+ /* camera */
+ GPIO23_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO85_CIF_LV,
+ GPIO84_CIF_FV,
+ GPIO27_CIF_DD_0,
+ GPIO114_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO115_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO94_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO108_CIF_DD_7,
+ GPIO50_GPIO, /* CAM_EN */
+ GPIO19_GPIO, /* CAM_RST */
+
+ /* EMU */
+ GPIO120_GPIO, /* EMU_MUX1 */
+ GPIO119_GPIO, /* EMU_MUX2 */
+ GPIO86_GPIO, /* SNP_INT_CTL */
+ GPIO87_GPIO, /* SNP_INT_IN */
+};
+#endif
+
+#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
+ defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
+static unsigned long gen2_pin_config[] __initdata = {
+ /* flip / lockswitch */
+ GPIO15_GPIO,
+
+ /* EOC */
+ GPIO10_GPIO,
+
+ /* bluetooth (bcm2045) */
+ GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO37_GPIO, /* RESET */
+ GPIO57_GPIO, /* WAKEUP */
+
+ /* Neptune handshake */
+ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
+ GPIO96_GPIO, /* AP_RDY */
+ GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
+ GPIO116_GPIO, /* RESET */
+ GPIO41_GPIO, /* BP_FLASH */
+
+ /* sound */
+ GPIO52_SSP3_SCLK,
+ GPIO83_SSP3_SFRM,
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+
+ /* ssp2 pins to in */
+ GPIO22_GPIO, /* SSP2_SCLK */
+ GPIO14_GPIO, /* SSP2_SFRM */
+ GPIO38_GPIO, /* SSP2_TXD */
+ GPIO88_GPIO, /* SSP2_RXD */
+
+ /* camera */
+ GPIO23_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO85_CIF_LV,
+ GPIO84_CIF_FV,
+ GPIO27_CIF_DD_0,
+ GPIO114_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO115_CIF_DD_3,
+ GPIO95_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO93_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+ GPIO50_GPIO, /* CAM_EN */
+ GPIO28_GPIO, /* CAM_RST */
+ GPIO17_GPIO, /* CAM_FLASH */
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned long a780_pin_config[] __initdata = {
+ /* keypad */
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+
+ /* attenuate sound */
+ GPIO96_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned long e680_pin_config[] __initdata = {
+ /* keypad */
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+
+ /* MIDI */
+ GPIO79_GPIO, /* VA_SEL_BUL */
+ GPIO80_GPIO, /* FLT_SEL_BUL */
+ GPIO78_GPIO, /* MIDI_RESET */
+ GPIO33_GPIO, /* MIDI_CS */
+ GPIO15_GPIO, /* MIDI_IRQ */
+ GPIO49_GPIO, /* MIDI_NPWE */
+ GPIO18_GPIO, /* MIDI_RDY */
+
+ /* leds */
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned long a1200_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned long a910_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+
+ /* WLAN */
+ GPIO89_GPIO, /* RESET */
+ GPIO33_GPIO, /* WAKEUP */
+ GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+
+ /* MMC CS */
+ GPIO20_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned long e2_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned long e6_pin_config[] __initdata = {
+ /* keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+};
+#endif
+
+/* KEYPAD */
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned int a780_key_map[] = {
+ KEY(0, 0, KEY_SEND),
+ KEY(0, 1, KEY_BACK),
+ KEY(0, 2, KEY_END),
+ KEY(0, 3, KEY_PAGEUP),
+ KEY(0, 4, KEY_UP),
+
+ KEY(1, 0, KEY_NUMERIC_1),
+ KEY(1, 1, KEY_NUMERIC_2),
+ KEY(1, 2, KEY_NUMERIC_3),
+ KEY(1, 3, KEY_SELECT),
+ KEY(1, 4, KEY_KPENTER),
+
+ KEY(2, 0, KEY_NUMERIC_4),
+ KEY(2, 1, KEY_NUMERIC_5),
+ KEY(2, 2, KEY_NUMERIC_6),
+ KEY(2, 3, KEY_RECORD),
+ KEY(2, 4, KEY_LEFT),
+
+ KEY(3, 0, KEY_NUMERIC_7),
+ KEY(3, 1, KEY_NUMERIC_8),
+ KEY(3, 2, KEY_NUMERIC_9),
+ KEY(3, 3, KEY_HOME),
+ KEY(3, 4, KEY_RIGHT),
+
+ KEY(4, 0, KEY_NUMERIC_STAR),
+ KEY(4, 1, KEY_NUMERIC_0),
+ KEY(4, 2, KEY_NUMERIC_POUND),
+ KEY(4, 3, KEY_PAGEDOWN),
+ KEY(4, 4, KEY_DOWN),
+};
+
+static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 5,
+ .matrix_key_map = a780_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(a780_key_map),
+
+ .direct_key_map = { KEY_CAMERA },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A780 */
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned int e680_key_map[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_RESERVED),
+ KEY(0, 3, KEY_SEND),
+
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_LEFT),
+ KEY(1, 2, KEY_PAGEUP),
+ KEY(1, 3, KEY_PAGEDOWN),
+
+ KEY(2, 0, KEY_RESERVED),
+ KEY(2, 1, KEY_RESERVED),
+ KEY(2, 2, KEY_RESERVED),
+ KEY(2, 3, KEY_KPENTER),
+};
+
+static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 4,
+ .matrix_key_map = e680_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(e680_key_map),
+
+ .direct_key_map = {
+ KEY_CAMERA,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_F1,
+ KEY_CANCEL,
+ KEY_F2,
+ },
+ .direct_key_num = 6,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E680 */
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned int a1200_key_map[] = {
+ KEY(0, 0, KEY_RESERVED),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_PAGEDOWN),
+ KEY(0, 3, KEY_RESERVED),
+ KEY(0, 4, KEY_RESERVED),
+ KEY(0, 5, KEY_RESERVED),
+
+ KEY(1, 0, KEY_RESERVED),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_CAMERA),
+ KEY(1, 3, KEY_RESERVED),
+ KEY(1, 4, KEY_RESERVED),
+ KEY(1, 5, KEY_RESERVED),
+
+ KEY(2, 0, KEY_RESERVED),
+ KEY(2, 1, KEY_KPENTER),
+ KEY(2, 2, KEY_RECORD),
+ KEY(2, 3, KEY_RESERVED),
+ KEY(2, 4, KEY_RESERVED),
+ KEY(2, 5, KEY_SELECT),
+
+ KEY(3, 0, KEY_RESERVED),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_RESERVED),
+ KEY(3, 4, KEY_RESERVED),
+ KEY(3, 5, KEY_RESERVED),
+
+ KEY(4, 0, KEY_RESERVED),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_PAGEUP),
+ KEY(4, 3, KEY_RESERVED),
+ KEY(4, 4, KEY_RESERVED),
+ KEY(4, 5, KEY_RESERVED),
+};
+
+static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_key_map = a1200_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A1200 */
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned int e6_key_map[] = {
+ KEY(0, 0, KEY_RESERVED),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_PAGEDOWN),
+ KEY(0, 3, KEY_RESERVED),
+ KEY(0, 4, KEY_RESERVED),
+ KEY(0, 5, KEY_NEXTSONG),
+
+ KEY(1, 0, KEY_RESERVED),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_PROG1),
+ KEY(1, 3, KEY_RESERVED),
+ KEY(1, 4, KEY_RESERVED),
+ KEY(1, 5, KEY_RESERVED),
+
+ KEY(2, 0, KEY_RESERVED),
+ KEY(2, 1, KEY_ENTER),
+ KEY(2, 2, KEY_CAMERA),
+ KEY(2, 3, KEY_RESERVED),
+ KEY(2, 4, KEY_RESERVED),
+ KEY(2, 5, KEY_WWW),
+
+ KEY(3, 0, KEY_RESERVED),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_RESERVED),
+ KEY(3, 4, KEY_RESERVED),
+ KEY(3, 5, KEY_PLAYPAUSE),
+
+ KEY(4, 0, KEY_RESERVED),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_PAGEUP),
+ KEY(4, 3, KEY_RESERVED),
+ KEY(4, 4, KEY_RESERVED),
+ KEY(4, 5, KEY_PREVIOUSSONG),
+};
+
+static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_key_map = e6_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(e6_key_map),
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E6 */
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned int a910_key_map[] = {
+ KEY(0, 0, KEY_NUMERIC_6),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_PAGEDOWN),
+ KEY(0, 3, KEY_KPENTER),
+ KEY(0, 4, KEY_NUMERIC_5),
+ KEY(0, 5, KEY_CAMERA),
+
+ KEY(1, 0, KEY_NUMERIC_8),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_RESERVED),
+ KEY(1, 3, KEY_F1), /* Left SoftKey */
+ KEY(1, 4, KEY_NUMERIC_STAR),
+ KEY(1, 5, KEY_RESERVED),
+
+ KEY(2, 0, KEY_NUMERIC_7),
+ KEY(2, 1, KEY_NUMERIC_9),
+ KEY(2, 2, KEY_RECORD),
+ KEY(2, 3, KEY_F2), /* Right SoftKey */
+ KEY(2, 4, KEY_BACK),
+ KEY(2, 5, KEY_SELECT),
+
+ KEY(3, 0, KEY_NUMERIC_2),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_NUMERIC_0),
+ KEY(3, 4, KEY_NUMERIC_1),
+ KEY(3, 5, KEY_RECORD),
+
+ KEY(4, 0, KEY_NUMERIC_4),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_PAGEUP),
+ KEY(4, 3, KEY_NUMERIC_POUND),
+ KEY(4, 4, KEY_NUMERIC_3),
+ KEY(4, 5, KEY_RESERVED),
};
-static void __init ezx_init(void)
+static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_key_map = a910_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(a910_key_map),
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A910 */
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned int e2_key_map[] = {
+ KEY(0, 0, KEY_NUMERIC_6),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_NUMERIC_9),
+ KEY(0, 3, KEY_NEXTSONG),
+ KEY(0, 4, KEY_NUMERIC_5),
+ KEY(0, 5, KEY_F1), /* Left SoftKey */
+
+ KEY(1, 0, KEY_NUMERIC_8),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 2, KEY_RESERVED),
+ KEY(1, 3, KEY_PAGEUP),
+ KEY(1, 4, KEY_NUMERIC_STAR),
+ KEY(1, 5, KEY_F2), /* Right SoftKey */
+
+ KEY(2, 0, KEY_NUMERIC_7),
+ KEY(2, 1, KEY_KPENTER),
+ KEY(2, 2, KEY_RECORD),
+ KEY(2, 3, KEY_PAGEDOWN),
+ KEY(2, 4, KEY_BACK),
+ KEY(2, 5, KEY_NUMERIC_0),
+
+ KEY(3, 0, KEY_NUMERIC_2),
+ KEY(3, 1, KEY_UP),
+ KEY(3, 2, KEY_SEND),
+ KEY(3, 3, KEY_PLAYPAUSE),
+ KEY(3, 4, KEY_NUMERIC_1),
+ KEY(3, 5, KEY_SOUND), /* Music SoftKey */
+
+ KEY(4, 0, KEY_NUMERIC_4),
+ KEY(4, 1, KEY_LEFT),
+ KEY(4, 2, KEY_NUMERIC_POUND),
+ KEY(4, 3, KEY_PREVIOUSSONG),
+ KEY(4, 4, KEY_NUMERIC_3),
+ KEY(4, 5, KEY_RESERVED),
+};
+
+static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
+ .matrix_key_rows = 5,
+ .matrix_key_cols = 6,
+ .matrix_key_map = e2_key_map,
+ .matrix_key_map_size = ARRAY_SIZE(e2_key_map),
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E2 */
+
+#ifdef CONFIG_MACH_EZX_A780
+static void __init a780_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+
pxa_set_i2c_info(NULL);
- if (machine_is_ezx_a780() || machine_is_ezx_e680())
- set_pxa_fb_info(&ezx_fb_info_1);
- else
- set_pxa_fb_info(&ezx_fb_info_2);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
+ set_pxa_fb_info(&ezx_fb_info_1);
-static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
- char **cmdline, struct meminfo *mi)
-{
- /* We have two ram chips. First one with 32MB at 0xA0000000 and a second
- * 16MB one at 0xAC000000
- */
- mi->nr_banks = 2;
- mi->bank[0].start = 0xa0000000;
- mi->bank[0].node = 0;
- mi->bank[0].size = (32*1024*1024);
- mi->bank[1].start = 0xac000000;
- mi->bank[1].node = 1;
- mi->bank[1].size = (16*1024*1024);
+ pxa_set_keypad_info(&a780_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
}
-#ifdef CONFIG_MACH_EZX_A780
MACHINE_START(EZX_A780, "Motorola EZX A780")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = &ezx_init,
+ .init_machine = a780_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E680
+static struct i2c_board_info __initdata e680_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init e680_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
+
+ set_pxa_fb_info(&ezx_fb_info_1);
+
+ pxa_set_keypad_info(&e680_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
MACHINE_START(EZX_E680, "Motorola EZX E680")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = &ezx_init,
+ .init_machine = e680_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A1200
+static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init a1200_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
+
+ set_pxa_fb_info(&ezx_fb_info_2);
+
+ pxa_set_keypad_info(&a1200_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = &ezx_init,
+ .init_machine = a1200_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A910
+static void __init a910_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+
+ pxa_set_i2c_info(NULL);
+
+ set_pxa_fb_info(&ezx_fb_info_2);
+
+ pxa_set_keypad_info(&a910_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
MACHINE_START(EZX_A910, "Motorola EZX A910")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = &ezx_init,
+ .init_machine = a910_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E6
+static struct i2c_board_info __initdata e6_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init e6_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
+
+ set_pxa_fb_info(&ezx_fb_info_2);
+
+ pxa_set_keypad_info(&e6_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
MACHINE_START(EZX_E6, "Motorola EZX E6")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = &ezx_init,
+ .init_machine = e6_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E2
+static struct i2c_board_info __initdata e2_i2c_board_info[] = {
+ { I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init e2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
+
+ set_pxa_fb_info(&ezx_fb_info_2);
+
+ pxa_set_keypad_info(&e2_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
MACHINE_START(EZX_E2, "Motorola EZX E2")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
- .init_machine = &ezx_init,
+ .init_machine = e2_init,
MACHINE_END
#endif
projects / linux-2.6-omap-h63xx.git / blobdiff