[ARM] omap: Fix IO_ADDRESS() macros

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / serial.c

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 24dd374224afaa8741c72d1d7c0dcf520a605fe6..7faa53c3a9255c6f83a137ab32177ea379b65dd1 100644 (file)
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-omap/omap2/serial.c
+ * arch/arm/mach-omap2/serial.c
  *
  * OMAP2 serial support.
  *
@@ -20,8 +20,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static struct clk * uart1_ick = NULL;
 static struct clk * uart1_fck = NULL;
@@ -32,24 +32,24 @@ static struct clk * uart3_fck = NULL;
 
 static struct plat_serial8250_port serial_platform_data[] = {
        {
-               .membase        = (char *)IO_ADDRESS(OMAP_UART1_BASE),
-               .mapbase        = (unsigned long)OMAP_UART1_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART1_BASE),
+               .mapbase        = OMAP_UART1_BASE,
                .irq            = 72,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
                .regshift       = 2,
                .uartclk        = OMAP16XX_BASE_BAUD * 16,
        }, {
-               .membase        = (char *)IO_ADDRESS(OMAP_UART2_BASE),
-               .mapbase        = (unsigned long)OMAP_UART2_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART2_BASE),
+               .mapbase        = OMAP_UART2_BASE,
                .irq            = 73,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
                .regshift       = 2,
                .uartclk        = OMAP16XX_BASE_BAUD * 16,
        }, {
-               .membase        = (char *)IO_ADDRESS(OMAP_UART3_BASE),
-               .mapbase        = (unsigned long)OMAP_UART3_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART3_BASE),
+               .mapbase        = OMAP_UART3_BASE,
                .irq            = 74,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
@@ -71,7 +71,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
                                    int value)
 {
        offset <<= p->regshift;
-       __raw_writeb(value, (unsigned long)(p->membase + offset));
+       __raw_writeb(value, p->membase + offset);
 }
 
 /*
@@ -84,7 +84,7 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
        serial_write_reg(p, UART_OMAP_MDR1, 0x07);
        serial_write_reg(p, UART_OMAP_SCR, 0x08);
        serial_write_reg(p, UART_OMAP_MDR1, 0x00);
-       serial_write_reg(p, UART_OMAP_SYSC, 0x01);
+       serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
 void __init omap_serial_init()
@@ -167,7 +167,7 @@ void __init omap_serial_init()
 
 static struct platform_device serial_device = {
        .name                   = "serial8250",
-       .id                     = 0,
+       .id                     = PLAT8250_DEV_PLATFORM,
        .dev                    = {
                .platform_data  = serial_platform_data,
        },