CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2),
CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X),
- CLK("mmci-omap-hs.2", "mmchs_fck", &mmchs3_fck, CK_3430ES2),
- CLK("mmci-omap-hs.1", "mmchs_fck", &mmchs2_fck, CK_343X),
+ CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X),
CLK(NULL, "mspro_fck", &mspro_fck, CK_343X),
- CLK("mmci-omap-hs.0", "mmchs_fck", &mmchs1_fck, CK_343X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X),
CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X),
CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X),
CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X),
CLK(NULL, "pka_ick", &pka_ick, CK_343X),
CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X),
CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2),
- CLK("mmci-omap-hs.2", "mmchs_ick", &mmchs3_ick, CK_3430ES2),
+ CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2),
CLK(NULL, "icr_ick", &icr_ick, CK_343X),
CLK(NULL, "aes2_ick", &aes2_ick, CK_343X),
CLK(NULL, "sha12_ick", &sha12_ick, CK_343X),
CLK(NULL, "des2_ick", &des2_ick, CK_343X),
- CLK("mmci-omap-hs.1", "mmchs_ick", &mmchs2_ick, CK_343X),
- CLK("mmci-omap-hs.0", "mmchs_ick", &mmchs1_ick, CK_343X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X),
CLK(NULL, "mspro_ick", &mspro_ick, CK_343X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X),
CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X),
CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X),
CLK(NULL, "aes1_ick", &aes1_ick, CK_343X),
- CLK(NULL, "rng_ick", &rng_ick, CK_343X),
+ CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
CLK(NULL, "dss_ick", &dss_ick, CK_343X),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
+ CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2),
- CLK(NULL, "usbhost_sar_fck", &usbhost_sar_fck, CK_3430ES2),
CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X),
CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X),
const struct dpll_data *dd;
int i = 0;
int ret = -EINVAL;
- u32 idlest_mask;
dd = clk->dpll_data;
- state <<= dd->idlest_bit;
- idlest_mask = 1 << dd->idlest_bit;
+ state <<= __ffs(dd->idlest_mask);
- while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
+ while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
i < MAX_DPLL_WAIT_TRIES) {
i++;
udelay(1);
return ret;
}
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = clk->parent->rate / (n + 1);
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
/*
ai = omap3_dpll_autoidle_read(clk);
+ omap3_dpll_deny_idle(clk);
+
_omap3_dpll_write_clken(clk, DPLL_LOCKED);
- if (ai) {
- /*
- * If no downstream clocks are enabled, CM_IDLEST bit
- * may never become active, so don't wait for DPLL to lock.
- */
- r = 0;
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
omap3_dpll_allow_idle(clk);
- } else {
- r = _omap3_wait_dpll_status(clk, 1);
- omap3_dpll_deny_idle(clk);
- };
return r;
}
if (clk == &dpll3_ck)
return -EINVAL;
- if (clk->parent->rate == clk_get_rate(clk))
+ if (clk->parent->rate == omap2_get_dpll_rate(clk))
r = _omap3_noncore_dpll_bypass(clk);
else
r = _omap3_noncore_dpll_lock(clk);
_omap3_noncore_dpll_stop(clk);
}
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /* Set jitter correction */
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ __raw_writel(v, dd->control_reg);
+
+ /* Set DPLL multiplier, divider */
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= m << __ffs(dd->mult_mask);
+ v |= (n - 1) << __ffs(dd->div1_mask);
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL with the rounded target rate. Returns -EINVAL upon
+ * error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u16 freqsel;
+ struct dpll_data *dd;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (rate == omap2_get_dpll_rate(clk))
+ return 0;
+
+ if (dd->last_rounded_rate != rate)
+ omap2_dpll_round_rate(clk, rate);
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+
+ omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
+ freqsel);
+
+ omap3_dpll_recalc(clk);
+
+ return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
static const struct clkops clkops_noncore_dpll_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
};
+/* DPLL autoidle read/set code */
+
+
/**
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
* @clk: struct clk * of the DPLL to read