#include <linux/cpufreq.h>
#include <linux/bitops.h>
+#include <mach/common.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "clock.h"
#include "clock24xx.h"
#include "prm.h"
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ * @parent_rate: rate of the parent of the dpll_ck
+ *
+ * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual). This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static u32 omap2xxx_clk_get_core_rate(struct clk *clk,
+ unsigned long parent_rate)
{
- long long dpll_clk;
- u8 amult;
+ long long core_clk;
+ u32 v;
- dpll_clk = omap2_get_dpll_rate(tclk);
+ core_clk = omap2_get_dpll_rate(clk, parent_rate);
- amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- amult &= OMAP24XX_CORE_CLK_SRC_MASK;
- dpll_clk *= amult;
+ v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+ if (v == CORE_CLK_SRC_32K)
+ core_clk = 32768;
+ else
+ core_clk *= v;
- return dpll_clk;
+ return core_clk;
}
-static int omap2_enable_osc_ck(struct clk *clk)
+static unsigned long omap2xxx_clk_find_oppset_by_mpurate(unsigned long mpu_speed,
+ struct prcm_config **prcm)
{
- u32 pcc;
+ unsigned long found_speed = 0;
+ struct prcm_config *p;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ p = *prcm;
- __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ for (p = rate_table; p->mpu_speed; p++) {
+ if (!(p->flags & cpu_mask))
+ continue;
- return 0;
+ if (p->xtal_speed != sys_ck.rate)
+ continue;
+
+ if (p->mpu_speed <= mpu_speed) {
+ found_speed = p->mpu_speed;
+ break;
+ }
+ }
+
+ return found_speed;
}
-static void omap2_disable_osc_ck(struct clk *clk)
+static int omap2_enable_osc_ck(struct clk *clk)
{
- u32 pcc;
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, 0,
+ OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKSRC_CTRL_OFFSET);
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
-
- __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ return 0;
}
-#ifdef OLD_CK
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
+static void omap2_disable_osc_ck(struct clk *clk)
{
- u32 div = PRCM_CLKSRC_CTRL;
- div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */
- div >>= clk->rate_offset;
- clk->rate = (clk->parent->rate / div);
- propagate_rate(clk);
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, OMAP_AUTOEXTCLKMODE_MASK,
+ OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKSRC_CTRL_OFFSET);
}
-#endif /* OLD_CK */
/* Enable an APLL if off */
static int omap2_clk_fixed_enable(struct clk *clk)
else if (clk == &apll54_ck)
cval = OMAP24XX_ST_54M_APLL;
- omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
- clk->name);
+ omap2_wait_clock_ready(PLL_MOD, CM_IDLEST, cval, clk->name);
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
-long omap2_dpllcore_round_rate(unsigned long target_rate)
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
}
-static void omap2_dpllcore_recalc(struct clk *clk)
+static void omap2_dpllcore_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = omap2_get_dpll_rate_24xx(clk);
+ unsigned long rate;
- propagate_rate(clk);
+ rate = omap2xxx_clk_get_core_rate(clk, parent_rate);
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = rate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = rate;
}
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
int ret = -EINVAL;
local_irq_save(flags);
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck, dpll_ck.parent->rate);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
if ((rate == (cur_rate / 2)) && (mult == 2)) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (rate != cur_rate) {
valid_rate = omap2_dpllcore_round_rate(rate);
if (valid_rate != rate)
if (!dd)
goto dpll_exit;
- tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+ tmpset.cm_clksel1_pll = cm_read_mod_reg(clk->prcm_mod,
+ dd->mult_div1_reg);
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
dd->div1_mask);
div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
bypass = 1;
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+ /* For omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
/* Force dll lock mode */
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
bypass);
/* Errata: ret dll entry state */
- omap2_init_memory_params(omap2_dll_force_needed());
- omap2_reprogram_sdrc(done_rate, 0);
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
}
- omap2_dpllcore_recalc(&dpll_ck);
ret = 0;
dpll_exit:
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
-static void omap2_table_mpu_recalc(struct clk *clk)
+static void omap2_table_mpu_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = curr_prcm_set->mpu_speed;
+ struct prcm_config *prcm;
+ unsigned long mpurate;
+
+ mpurate = omap2xxx_clk_find_oppset_by_mpurate(parent_rate, &prcm);
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = mpurate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = mpurate;
}
/*
{
u32 cur_rate, done_rate, bypass = 0, tmp;
struct prcm_config *prcm;
- unsigned long found_speed = 0;
- unsigned long flags;
+ unsigned long flags, found_speed;
if (clk != &virt_prcm_set)
return -EINVAL;
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
-
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
-
- if (prcm->mpu_speed <= rate) {
- found_speed = prcm->mpu_speed;
- break;
- }
- }
-
+ found_speed = omap2xxx_clk_find_oppset_by_mpurate(rate, &prcm);
if (!found_speed) {
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
rate / 1000000);
}
curr_prcm_set = prcm;
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck, dpll_ck.parent->rate);
if (prcm->dpll_speed == cur_rate / 2) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if (prcm->dpll_speed == cur_rate * 2) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (prcm->dpll_speed != cur_rate) {
local_irq_save(flags);
/* Major subsystem dividers */
tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
- cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+ cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+ CM_CLKSEL1);
+
if (cpu_is_omap2430())
cm_write_mod_reg(prcm->cm_clksel_mdm,
OMAP2430_MDM_MOD, CM_CLKSEL);
- /* x2 to enter init_mem */
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ /* x2 to enter omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
bypass);
- omap2_init_memory_params(omap2_dll_force_needed());
- omap2_reprogram_sdrc(done_rate, 0);
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
local_irq_restore(flags);
}
- omap2_dpllcore_recalc(&dpll_ck);
return 0;
}
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ */
+static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ struct prcm_config *prcm;
+ int i = 0;
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck.rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = prcm->mpu_speed / 1000;
+ i++;
+ }
+
+ if (i == 0) {
+ printk(KERN_WARNING "%s: failed to initialize frequency "
+ "table\n", __func__);
+ return;
+ }
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+}
+#endif
+
static struct clk_functions omap2_clk_functions = {
+ .clk_register = omap2_clk_register,
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
.clk_round_rate = omap2_clk_round_rate,
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
+ .clk_get_parent = omap2_clk_get_parent,
.clk_disable_unused = omap2_clk_disable_unused,
+#ifdef CONFIG_CPU_FREQ
+ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+#endif
};
static u32 omap2_get_apll_clkin(void)
{
- u32 aplls, sclk = 0;
+ u32 aplls, srate = 0;
aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
aplls &= OMAP24XX_APLLS_CLKIN_MASK;
aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
if (aplls == APLLS_CLKIN_19_2MHZ)
- sclk = 19200000;
+ srate = 19200000;
else if (aplls == APLLS_CLKIN_13MHZ)
- sclk = 13000000;
+ srate = 13000000;
else if (aplls == APLLS_CLKIN_12MHZ)
- sclk = 12000000;
+ srate = 12000000;
- return sclk;
+ return srate;
}
static u32 omap2_get_sysclkdiv(void)
{
u32 div;
- div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ div = prm_read_mod_reg(OMAP24XX_GR_MOD,
+ OMAP24XX_PRCM_CLKSRC_CTRL_OFFSET);
div &= OMAP_SYSCLKDIV_MASK;
div >>= OMAP_SYSCLKDIV_SHIFT;
return div;
}
-static void omap2_osc_clk_recalc(struct clk *clk)
+static void omap2_osc_clk_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
- propagate_rate(clk);
+ unsigned long rate;
+
+ /* XXX osc_ck on 2xxx currently is parentless */
+ rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = rate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = rate;
}
-static void omap2_sys_clk_recalc(struct clk *clk)
+static void omap2_sys_clk_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
- propagate_rate(clk);
+ unsigned long rate;
+
+ rate = parent_rate / omap2_get_sysclkdiv();
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = rate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = rate;
}
/*
if (!mpurate)
return -EINVAL;
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+ if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks();
clk_init(&omap2_clk_functions);
- omap2_osc_clk_recalc(&osc_ck);
- omap2_sys_clk_recalc(&sys_ck);
+ omap2_osc_clk_recalc(&osc_ck, 0, CURRENT_RATE);
+ omap2_sys_clk_recalc(&sys_ck, sys_ck.parent->rate, CURRENT_RATE);
for (clkp = onchip_24xx_clks;
clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
}
/* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck, dpll_ck.parent->rate);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
projects / linux-2.6-omap-h63xx.git / blobdiff