* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ * @parent_rate: rate of the parent of the dpll_ck
+ *
+ * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual). This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static u32 omap2xxx_clk_get_core_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ long long core_clk;
+ u32 v;
+
+ core_clk = omap2_get_dpll_rate(clk, parent_rate);
+
+ v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+ if (v == CORE_CLK_SRC_32K)
+ core_clk = 32768;
+ else
+ core_clk *= v;
+
+ return core_clk;
+}
+
+static unsigned long omap2xxx_clk_find_oppset_by_mpurate(unsigned long mpu_speed,
+ struct prcm_config **prcm)
{
- long long dpll_clk;
- u8 amult;
+ unsigned long found_speed = 0;
+ struct prcm_config *p;
+
+ p = *prcm;
+
+ for (p = rate_table; p->mpu_speed; p++) {
+ if (!(p->flags & cpu_mask))
+ continue;
- dpll_clk = omap2_get_dpll_rate(tclk);
+ if (p->xtal_speed != sys_ck.rate)
+ continue;
- amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- amult &= OMAP24XX_CORE_CLK_SRC_MASK;
- dpll_clk *= amult;
+ if (p->mpu_speed <= mpu_speed) {
+ found_speed = p->mpu_speed;
+ break;
+ }
+ }
- return dpll_clk;
+ return found_speed;
}
static int omap2_enable_osc_ck(struct clk *clk)
}
-static void omap2_dpllcore_recalc(struct clk *clk)
+static void omap2_dpllcore_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = omap2_get_dpll_rate_24xx(clk);
+ unsigned long rate;
+
+ rate = omap2xxx_clk_get_core_rate(clk, parent_rate);
- propagate_rate(clk);
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = rate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = rate;
}
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
int ret = -EINVAL;
local_irq_save(flags);
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck, dpll_ck.parent->rate);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
omap2xxx_sdrc_reprogram(done_rate, 0);
}
- omap2_dpllcore_recalc(&dpll_ck);
ret = 0;
dpll_exit:
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
-static void omap2_table_mpu_recalc(struct clk *clk)
+static void omap2_table_mpu_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = curr_prcm_set->mpu_speed;
+ struct prcm_config *prcm;
+ unsigned long mpurate;
+
+ mpurate = omap2xxx_clk_find_oppset_by_mpurate(parent_rate, &prcm);
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = mpurate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = mpurate;
}
/*
{
u32 cur_rate, done_rate, bypass = 0, tmp;
struct prcm_config *prcm;
- unsigned long found_speed = 0;
- unsigned long flags;
+ unsigned long flags, found_speed;
if (clk != &virt_prcm_set)
return -EINVAL;
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
-
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
-
- if (prcm->mpu_speed <= rate) {
- found_speed = prcm->mpu_speed;
- break;
- }
- }
-
+ found_speed = omap2xxx_clk_find_oppset_by_mpurate(rate, &prcm);
if (!found_speed) {
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
rate / 1000000);
}
curr_prcm_set = prcm;
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck, dpll_ck.parent->rate);
if (prcm->dpll_speed == cur_rate / 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
local_irq_restore(flags);
}
- omap2_dpllcore_recalc(&dpll_ck);
return 0;
}
.clk_round_rate = omap2_clk_round_rate,
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
+ .clk_get_parent = omap2_clk_get_parent,
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
return div;
}
-static void omap2_osc_clk_recalc(struct clk *clk)
+static void omap2_osc_clk_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
- propagate_rate(clk);
+ unsigned long rate;
+
+ /* XXX osc_ck on 2xxx currently is parentless */
+ rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = rate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = rate;
}
-static void omap2_sys_clk_recalc(struct clk *clk)
+static void omap2_sys_clk_recalc(struct clk *clk, unsigned long parent_rate,
+ u8 rate_storage)
{
- clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
- propagate_rate(clk);
+ unsigned long rate;
+
+ rate = parent_rate / omap2_get_sysclkdiv();
+
+ if (rate_storage == CURRENT_RATE)
+ clk->rate = rate;
+ else if (rate_storage == TEMP_RATE)
+ clk->temp_rate = rate;
}
/*
if (!mpurate)
return -EINVAL;
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+ if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks();
clk_init(&omap2_clk_functions);
- omap2_osc_clk_recalc(&osc_ck);
- omap2_sys_clk_recalc(&sys_ck);
+ omap2_osc_clk_recalc(&osc_ck, 0, CURRENT_RATE);
+ omap2_sys_clk_recalc(&sys_ck, sys_ck.parent->rate, CURRENT_RATE);
for (clkp = onchip_24xx_clks;
clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
}
/* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck, dpll_ck.parent->rate);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
projects / linux-2.6-omap-h63xx.git / blobdiff