#include <mach/clockdomain.h>
#include <mach/sram.h>
#include <mach/cpu.h>
+#include <mach/prcm.h>
+#include <mach/control.h>
#include <asm/div64.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "sdrc.h"
#include "clock.h"
#include "prm.h"
#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+/* Some OMAP2xxx CM_CLKSEL_PLL.ST_CORE_CLK bits - for omap2_get_dpll_rate() */
+#define ST_CORE_CLK_REF 0x1
+#define ST_CORE_CLK_32K 0x3
+
+/* Bitmask to isolate the register type of clk.enable_reg */
+#define PRCM_REGTYPE_MASK 0xf0
+/* various CM register type options */
+#define CM_FCLKEN_REGTYPE 0x00
+#define CM_ICLKEN_REGTYPE 0x10
+#define CM_IDLEST_REGTYPE 0x20
+
u8 cpu_mask;
/*-------------------------------------------------------------------------
* OMAP2/3 specific clock functions
*-------------------------------------------------------------------------*/
+/*
+ * _omap2_clk_read_reg - read a clock register
+ * @clk: struct clk *
+ *
+ * Given a struct clk *, returns the value of the clock's register.
+ */
+static u32 _omap2_clk_read_reg(u16 reg_offset, struct clk *clk)
+{
+ if (clk->prcm_mod & CLK_REG_IN_SCM)
+ return omap_ctrl_readl(reg_offset);
+ else if (clk->prcm_mod & CLK_REG_IN_PRM)
+ return prm_read_mod_reg(clk->prcm_mod & PRCM_MOD_ADDR_MASK,
+ reg_offset);
+ else
+ return cm_read_mod_reg(clk->prcm_mod, reg_offset);
+}
+
+/*
+ * _omap2_clk_write_reg - write a clock's register
+ * @v: value to write to the clock's enable_reg
+ * @clk: struct clk *
+ *
+ * Given a register value @v and struct clk * @clk, writes the value of @v to
+ * the clock's enable register. No return value.
+ */
+static void _omap2_clk_write_reg(u32 v, u16 reg_offset, struct clk *clk)
+{
+ if (clk->prcm_mod & CLK_REG_IN_SCM)
+ omap_ctrl_writel(v, reg_offset);
+ else if (clk->prcm_mod & CLK_REG_IN_PRM)
+ prm_write_mod_reg(v, clk->prcm_mod & PRCM_MOD_ADDR_MASK,
+ reg_offset);
+ else
+ cm_write_mod_reg(v, clk->prcm_mod, reg_offset);
+}
+
+
/**
* omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
* @clk: OMAP clock struct ptr to use
{
struct clockdomain *clkdm;
- if (!clk->clkdm_name)
+ if (!clk->clkdm.name) {
+ pr_err("clock: %s: missing clockdomain", clk->name);
return;
+ }
- clkdm = clkdm_lookup(clk->clkdm_name);
+ clkdm = clkdm_lookup(clk->clkdm.name);
if (clkdm) {
pr_debug("clock: associated clk %s to clkdm %s\n",
- clk->name, clk->clkdm_name);
- clk->clkdm = clkdm;
+ clk->name, clk->clkdm.name);
+ clk->clkdm.ptr = clkdm;
} else {
- pr_debug("clock: could not associate clk %s to "
- "clkdm %s\n", clk->name, clk->clkdm_name);
+ pr_err("clock: %s: could not associate to clkdm %s\n",
+ clk->name, clk->clkdm.name);
}
}
if (!clk->clksel)
return;
- r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ r = _omap2_clk_read_reg(clk->clksel_reg, clk);
+ r &= clk->clksel_mask;
r >>= __ffs(clk->clksel_mask);
for (clks = clk->clksel; clks->parent && !found; clks++) {
return;
}
-/* Returns the DPLL rate */
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
u32 omap2_get_dpll_rate(struct clk *clk)
{
long long dpll_clk;
- u32 dpll_mult, dpll_div, dpll;
+ u32 dpll_mult, dpll_div, v;
struct dpll_data *dd;
dd = clk->dpll_data;
- /* REVISIT: What do we return on error? */
if (!dd)
return 0;
- dpll = __raw_readl(dd->mult_div1_reg);
- dpll_mult = dpll & dd->mult_mask;
+ /* Return bypass rate if DPLL is bypassed */
+ v = cm_read_mod_reg(clk->prcm_mod, dd->idlest_reg);
+ v &= dd->idlest_mask;
+ v >>= __ffs(dd->idlest_mask);
+ if (cpu_is_omap24xx()) {
+
+ if (v == ST_CORE_CLK_REF)
+ return clk->parent->rate; /* sys_clk */
+ else if (v == ST_CORE_CLK_32K)
+ return 32768;
+
+ } else if (cpu_is_omap34xx()) {
+
+ if (!v)
+ return dd->bypass_clk->rate;
+
+ }
+
+ v = cm_read_mod_reg(clk->prcm_mod, dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = dpll & dd->div1_mask;
+ dpll_div = v & dd->div1_mask;
dpll_div >>= __ffs(dd->div1_mask);
dpll_clk = (long long)clk->parent->rate * dpll_mult;
/**
* omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
+ * @prcm_mod: CM submodule offset from CM_BASE (e.g., "MPU_MOD")
+ * @reg_index: offset of CM register address from prcm_mod
* @mask: value to mask against to determine if the clock is active
* @name: name of the clock (for printk)
*
* Returns 1 if the clock enabled in time, or 0 if it failed to enable
* in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
*/
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+int omap2_wait_clock_ready(s16 prcm_mod, u16 reg_index, u32 mask,
+ const char *name)
{
- int i = 0;
- int ena = 0;
+ int i = 0, ena = 0;
/*
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
* 34xx reverses this, just to keep us on our toes
*/
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+ if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
ena = mask;
- } else if (cpu_mask & RATE_IN_343X) {
+ else if (cpu_mask & RATE_IN_343X)
ena = 0;
- }
/* Wait for lock */
- while (((__raw_readl(reg) & mask) != ena) &&
+ while (((cm_read_mod_reg(prcm_mod, reg_index) & mask) != ena) &&
(i++ < MAX_CLOCK_ENABLE_WAIT)) {
udelay(1);
}
printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
name, MAX_CLOCK_ENABLE_WAIT);
-
return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
};
/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+ * omap2_clk_wait_ready - wait for a OMAP module to come out of target idle
+ * @clk: struct clk * recently enabled to indicate the module to test
+ *
+ * Wait for an OMAP module with a target idle state bit to come out of
+ * idle once both its interface clock and primary functional clock are
+ * both enabled. Any register read or write to the device before it
+ * returns from idle will cause an abort. Not all modules have target
+ * idle state bits (for example, DSS and CAM on OMAP24xx); so we don't
+ * wait for those. No return value.
+ *
+ * We don't need special code here for INVERT_ENABLE for the time
+ * being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL.
+ *
+ * REVISIT: This function is misnamed: it should be something like
+ * "omap2_module_wait_ready", and in the long-term, it does not belong
+ * in the clock framework. It also shouldn't be doing register
+ * arithmetic to determine the companion clock.
*/
static void omap2_clk_wait_ready(struct clk *clk)
{
- void __iomem *reg, *other_reg, *st_reg;
- u32 bit;
+ u16 other_reg, idlest_reg;
+ u32 other_bit;
- /*
- * REVISIT: This code is pretty ugly. It would be nice to generalize
- * it and pull it into struct clk itself somehow.
- */
- reg = clk->enable_reg;
- if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
- (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
- other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
- else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
- (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
- other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
- else
+ if (!(clk->flags & WAIT_READY))
return;
- /* REVISIT: What are the appropriate exclusions for 34XX? */
- /* No check for DSS or cam clocks */
- if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
- if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
- clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
- clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
- return;
- }
+ /* If we are enabling an iclk, also test the fclk; and vice versa */
+ other_bit = 1 << clk->enable_bit;
+ other_reg = clk->enable_reg & ~PRCM_REGTYPE_MASK;
- /* REVISIT: What are the appropriate exclusions for 34XX? */
- /* OMAP3: ignore DSS-mod clocks */
- if (cpu_is_omap34xx() &&
- (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
- ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
- clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
- return;
+ if (clk->enable_reg & CM_ICLKEN_REGTYPE)
+ other_reg |= CM_FCLKEN_REGTYPE;
+ else
+ other_reg |= CM_ICLKEN_REGTYPE;
- /* Check if both functional and interface clocks
- * are running. */
- bit = 1 << clk->enable_bit;
- if (!(__raw_readl(other_reg) & bit))
+ /* Ensure functional and interface clocks are running. */
+ if (!(cm_read_mod_reg(clk->prcm_mod, other_reg) & other_bit))
return;
- st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
- omap2_wait_clock_ready(st_reg, bit, clk->name);
+ idlest_reg = other_reg & ~PRCM_REGTYPE_MASK;
+ idlest_reg |= CM_IDLEST_REGTYPE;
+
+ omap2_wait_clock_ready(clk->prcm_mod, idlest_reg, 1 << clk->idlest_bit,
+ clk->name);
}
/* Enables clock without considering parent dependencies or use count
* REVISIT: Maybe change this to use clk->enable like on omap1?
*/
-int _omap2_clk_enable(struct clk *clk)
+static int _omap2_clk_enable(struct clk *clk)
{
- u32 regval32;
+ u32 v;
if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
return 0;
if (clk->enable)
return clk->enable(clk);
- if (unlikely(clk->enable_reg == NULL)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0; /* REVISIT: -EINVAL */
- }
-
- regval32 = __raw_readl(clk->enable_reg);
+ v = _omap2_clk_read_reg(clk->enable_reg, clk);
if (clk->flags & INVERT_ENABLE)
- regval32 &= ~(1 << clk->enable_bit);
+ v &= ~(1 << clk->enable_bit);
else
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
+ v |= (1 << clk->enable_bit);
+ _omap2_clk_write_reg(v, clk->enable_reg, clk);
wmb();
omap2_clk_wait_ready(clk);
}
/* Disables clock without considering parent dependencies or use count */
-void _omap2_clk_disable(struct clk *clk)
+static void _omap2_clk_disable(struct clk *clk)
{
- u32 regval32;
+ u32 v;
if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
return;
return;
}
- if (clk->enable_reg == NULL) {
- /*
- * 'Independent' here refers to a clock which is not
- * controlled by its parent.
- */
- printk(KERN_ERR "clock: clk_disable called on independent "
- "clock %s which has no enable_reg\n", clk->name);
- return;
- }
-
- regval32 = __raw_readl(clk->enable_reg);
+ v = _omap2_clk_read_reg(clk->enable_reg, clk);
if (clk->flags & INVERT_ENABLE)
- regval32 |= (1 << clk->enable_bit);
+ v |= (1 << clk->enable_bit);
else
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
+ v &= ~(1 << clk->enable_bit);
+ _omap2_clk_write_reg(v, clk->enable_reg, clk);
wmb();
}
{
if (clk->usecount > 0 && !(--clk->usecount)) {
_omap2_clk_disable(clk);
- if (likely((u32)clk->parent))
+ if (clk->parent)
omap2_clk_disable(clk->parent);
- if (clk->clkdm)
- omap2_clkdm_clk_disable(clk->clkdm, clk);
+ if (clk->clkdm.ptr)
+ omap2_clkdm_clk_disable(clk->clkdm.ptr, clk);
}
}
int ret = 0;
if (clk->usecount++ == 0) {
- if (likely((u32)clk->parent))
+ if (clk->parent)
ret = omap2_clk_enable(clk->parent);
- if (unlikely(ret != 0)) {
+ if (ret != 0) {
clk->usecount--;
return ret;
}
- if (clk->clkdm)
- omap2_clkdm_clk_enable(clk->clkdm, clk);
+ if (clk->clkdm.ptr)
+ omap2_clkdm_clk_enable(clk->clkdm.ptr, clk);
ret = _omap2_clk_enable(clk);
- if (unlikely(ret != 0)) {
- if (clk->clkdm)
- omap2_clkdm_clk_disable(clk->clkdm, clk);
+ if (ret != 0) {
+ if (clk->clkdm.ptr)
+ omap2_clkdm_clk_disable(clk->clkdm.ptr, clk);
if (clk->parent) {
omap2_clk_disable(clk->parent);
if (div == 0)
return;
- if (unlikely(clk->rate == clk->parent->rate / div))
+ if (clk->rate == (clk->parent->rate / div))
return;
clk->rate = clk->parent->rate / div;
pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
- if (unlikely(clk->flags & RATE_PROPAGATES))
+ if (clk->flags & RATE_PROPAGATES)
propagate_rate(clk);
}
* the element associated with the supplied parent clock address.
* Returns a pointer to the struct clksel on success or NULL on error.
*/
-const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
- struct clk *src_clk)
+static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+ struct clk *src_clk)
{
const struct clksel *clks;
*new_div = 1;
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
const struct clksel_rate *clkr;
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
WARN_ON(div == 0);
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
return clkr->val;
}
-/**
- * omap2_get_clksel - find clksel register addr & field mask for a clk
- * @clk: struct clk to use
- * @field_mask: ptr to u32 to store the register field mask
- *
- * Returns the address of the clksel register upon success or NULL on error.
- */
-void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
-{
- if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
- return NULL;
-
- *field_mask = clk->clksel_mask;
-
- return clk->clksel_reg;
-}
-
/**
* omap2_clksel_get_divisor - get current divider applied to parent clock.
* @clk: OMAP struct clk to use.
*/
u32 omap2_clksel_get_divisor(struct clk *clk)
{
- u32 field_mask, field_val;
- void __iomem *div_addr;
+ u32 v;
- div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == NULL)
+ if (!clk->clksel_mask)
return 0;
- field_val = __raw_readl(div_addr) & field_mask;
- field_val >>= __ffs(field_mask);
+ v = _omap2_clk_read_reg(clk->clksel_reg, clk);
+ v &= clk->clksel_mask;
+ v >>= __ffs(clk->clksel_mask);
- return omap2_clksel_to_divisor(clk, field_val);
+ return omap2_clksel_to_divisor(clk, v);
}
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
{
- u32 field_mask, field_val, reg_val, validrate, new_div = 0;
- void __iomem *div_addr;
+ u32 v, field_val, validrate, new_div = 0;
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
+ if (!clk->clksel_mask)
return -EINVAL;
- div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == NULL)
- return -EINVAL;
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
+ return -EINVAL;
field_val = omap2_divisor_to_clksel(clk, new_div);
if (field_val == ~0)
return -EINVAL;
- reg_val = __raw_readl(div_addr);
- reg_val &= ~field_mask;
- reg_val |= (field_val << __ffs(field_mask));
- __raw_writel(reg_val, div_addr);
+ v = _omap2_clk_read_reg(clk->clksel_reg, clk);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ _omap2_clk_write_reg(v, clk->clksel_reg, clk);
+
wmb();
clk->rate = clk->parent->rate / new_div;
if (clk->set_rate != NULL)
ret = clk->set_rate(clk, rate);
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+ if (ret == 0 && (clk->flags & RATE_PROPAGATES))
propagate_rate(clk);
return ret;
/*
* Converts encoded control register address into a full address
- * On error, *src_addr will be returned as 0.
+ * On error, the return value (parent_div) will be 0.
*/
-static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
- struct clk *src_clk, u32 *field_mask,
- struct clk *clk, u32 *parent_div)
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+ u32 *field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
- *parent_div = 0;
- *src_addr = NULL;
-
clks = omap2_get_clksel_by_parent(clk, src_clk);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
/* Should never happen. Add a clksel mask to the struct clk. */
WARN_ON(clk->clksel_mask == 0);
- *field_mask = clk->clksel_mask;
- *src_addr = clk->clksel_reg;
- *parent_div = clkr->div;
+ *field_val = clkr->val;
- return clkr->val;
+ return clkr->div;
}
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
{
- void __iomem *src_addr;
- u32 field_val, field_mask, reg_val, parent_div;
+ u32 field_val, v, parent_div;
- if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+ if (clk->flags & CONFIG_PARTICIPANT)
return -EINVAL;
if (!clk->clksel)
return -EINVAL;
- field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
- &field_mask, clk, &parent_div);
- if (src_addr == NULL)
+ parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+ if (!parent_div)
return -EINVAL;
if (clk->usecount > 0)
_omap2_clk_disable(clk);
/* Set new source value (previous dividers if any in effect) */
- reg_val = __raw_readl(src_addr) & ~field_mask;
- reg_val |= (field_val << __ffs(field_mask));
- __raw_writel(reg_val, src_addr);
+ v = _omap2_clk_read_reg(clk->clksel_reg, clk);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ _omap2_clk_write_reg(v, clk->clksel_reg, clk);
wmb();
if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+ prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
+ OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
wmb();
}
pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
clk->name, clk->parent->name, clk->rate);
- if (unlikely(clk->flags & RATE_PROPAGATES))
+ if (clk->flags & RATE_PROPAGATES)
propagate_rate(clk);
return 0;
return 0;
}
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
{
unsigned long long num;
int m, n, r, e, scaled_max_m;
unsigned long scaled_rt_rp, new_rate;
int min_e = -1, min_e_m = -1, min_e_n = -1;
+ struct dpll_data *dd;
if (!clk || !clk->dpll_data)
return ~0;
+ dd = clk->dpll_data;
+
pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
"%ld\n", clk->name, target_rate);
scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
- scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
- clk->dpll_data->last_rounded_rate = 0;
+ dd->last_rounded_rate = 0;
- for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+ for (n = dd->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
/* Compute the scaled DPLL multiplier, based on the divider */
m = scaled_rt_rp * n;
"(new_rate = %ld)\n", n, m, e, new_rate);
if (min_e == -1 ||
- min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+ min_e >= (int)(abs(e) - dd->rate_tolerance)) {
min_e = e;
min_e_m = m;
min_e_n = n;
return ~0;
}
- clk->dpll_data->last_rounded_m = min_e_m;
- clk->dpll_data->last_rounded_n = min_e_n;
- clk->dpll_data->last_rounded_rate =
- _dpll_compute_new_rate(clk->parent->rate, min_e_m, min_e_n);
+ dd->last_rounded_m = min_e_m;
+ dd->last_rounded_n = min_e_n;
+ dd->last_rounded_rate = _dpll_compute_new_rate(clk->parent->rate,
+ min_e_m, min_e_n);
pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
min_e, min_e_m, min_e_n);
pr_debug("clock: final rate: %ld (target rate: %ld)\n",
- clk->dpll_data->last_rounded_rate, target_rate);
+ dd->last_rounded_rate, target_rate);
- return clk->dpll_data->last_rounded_rate;
+ return dd->last_rounded_rate;
}
/*-------------------------------------------------------------------------
v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
- regval32 = __raw_readl(clk->enable_reg);
+ regval32 = _omap2_clk_read_reg(clk->enable_reg, clk);
if ((regval32 & (1 << clk->enable_bit)) == v)
return;
projects / linux-2.6-omap-h63xx.git / blobdiff