Merge branch 'omap-clock-fixes' of git://git.pwsan.com/linux-2.6

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / board-omap3beagle.c

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index a3844084fd3b03afbb7a27dd1091cc8ae13ccfa1..19bc2a1f7fbead613db5e28756ac3b51ed1efb8d 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -43,6 +43,7 @@
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 #include <mach/mux.h>
+#include <mach/timer-gp.h>
 
 #include "twl4030-generic-scripts.h"
 #include "mmc-twl4030.h"
@@ -176,6 +177,21 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
        .setup          = beagle_twl_gpio_setup,
 };
 
+static struct platform_device omap3_beagle_lcd_device = {
+       .name           = "omap3beagle_lcd",
+       .id             = -1,
+};
+
+static struct regulator_consumer_supply beagle_vdac_supply = {
+       .supply         = "vdac",
+       .dev            = &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+       .supply         = "vdvi",
+       .dev            = &omap3_beagle_lcd_device.dev,
+};
+
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data beagle_vmmc1 = {
        .constraints = {
@@ -216,6 +232,45 @@ static struct regulator_init_data beagle_vdac = {
                .valid_ops_mask         = REGULATOR_CHANGE_MODE
                                        | REGULATOR_CHANGE_STATUS,
        },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+       .constraints = {
+               .name                   = "VDVI",
+               .min_uV                 = 1800000,
+               .max_uV                 = 1800000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &beagle_vdvi_supply,
+};
+
+static const struct twl4030_resconfig beagle_resconfig[] = {
+       /* disable regulators that u-boot left enabled; the
+        * devices' drivers should be managing these.
+        */
+       { .resource = RES_VAUX3, },     /* not even connected! */
+       { .resource = RES_VMMC1, },
+       { .resource = RES_VSIM, },
+       { .resource = RES_VPLL2, },
+       { .resource = RES_VDAC, },
+       { .resource = RES_VUSB_1V5, },
+       { .resource = RES_VUSB_1V8, },
+       { .resource = RES_VUSB_3V1, },
+       { 0, },
+};
+
+static struct twl4030_power_data beagle_power_data = {
+       .resource_config        = beagle_resconfig,
+       /* REVISIT can't use GENERIC3430_T2SCRIPTS_DATA;
+        * among other things, it makes reboot fail.
+        */
 };
 
 static struct twl4030_platform_data beagle_twldata = {
@@ -225,10 +280,11 @@ static struct twl4030_platform_data beagle_twldata = {
        /* platform_data for children goes here */
        .usb            = &beagle_usb_data,
        .gpio           = &beagle_gpio_data,
-       .power          = GENERIC3430_T2SCRIPTS_DATA,
+       .power          = &beagle_power_data,
        .vmmc1          = &beagle_vmmc1,
        .vsim           = &beagle_vsim,
        .vdac           = &beagle_vdac,
+       .vpll2          = &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -254,14 +310,12 @@ static void __init omap3_beagle_init_irq(void)
 {
        omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
        omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+       omap2_gp_clockevent_set_gptimer(12);
+#endif
        omap_gpio_init();
 }
 
-static struct platform_device omap3_beagle_lcd_device = {
-       .name           = "omap3beagle_lcd",
-       .id             = -1,
-};
-
 static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
        .ctrl_name      = "internal",
 };