#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
-#include <asm/hardware.h>
+#include <linux/i2c/twl4030.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/board.h>
+#include <mach/usb-musb.h>
+#include <mach/usb-ehci.h>
+#include <mach/hsmmc.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+#include <mach/mux.h>
+
+
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition omap3beagle_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
-#include <asm/arch/gpio.h>
-#include <asm/arch/board.h>
-#include <asm/arch/usb-musb.h>
-#include <asm/arch/usb-ehci.h>
-#include <asm/arch/hsmmc.h>
-#include <asm/arch/common.h>
+static struct omap_nand_platform_data omap3beagle_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = omap3beagle_nand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .nand_setup = NULL,
+ .dev_ready = NULL,
+};
+
+static struct resource omap3beagle_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device omap3beagle_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3beagle_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3beagle_nand_resource,
+};
+
+#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_usb_data beagle_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int beagle_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* request_gpio(gpio + 0, "mmc0_cd");
+ * gpio_direction_input(gpio + 0);
+ */
+
+ gpio_request(gpio + 1, "EHCI_nOC");
+ gpio_direction_input(gpio + 1);
+
+ /* gpio + 18 + 0 == ledA, nEN_USB_PWR (out)
+ * gpio + 18 + 1 == ledB, PMU_STAT (out, a LED)
+ */
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data beagle_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ | BIT(15) | BIT(16) | BIT(17),
+ .setup = beagle_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &beagle_usb_data,
+ .gpio = &beagle_gpio_data,
+};
+
+static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &beagle_twldata,
+ },
+};
+
static int __init omap3_beagle_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
+ ARRAY_SIZE(beagle_i2c_boardinfo));
+#ifdef CONFIG_I2C2_OMAP_BEAGLE
omap_register_i2c_bus(2, 400, NULL, 0);
+#endif
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
-static struct omap_mmc_config omap3beagle_mmc_config __initdata = {
- .mmc [0] = {
- .enabled = 1,
- .wire4 = 1,
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "beagleboard::usr0",
+ .default_trigger = "heartbeat",
+ .gpio = 150,
+ },
+ {
+ .name = "beagleboard::usr1",
+ .default_trigger = "mmc0",
+ .gpio = 149,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 7,
+ .desc = "user",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
},
};
static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
{ OMAP_TAG_UART, &omap3_beagle_uart_config },
- { OMAP_TAG_MMC, &omap3beagle_mmc_config },
+ { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
};
+static struct platform_device *omap3_beagle_devices[] __initdata = {
+ &omap3_beagle_lcd_device,
+ &leds_gpio,
+ &keys_gpio,
+};
+
+static void __init omap3beagle_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ omap3beagle_nand_data.cs = nandcs;
+ omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&omap3beagle_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+
static void __init omap3_beagle_init(void)
{
+ omap3_beagle_i2c_init();
+ platform_add_devices(omap3_beagle_devices,
+ ARRAY_SIZE(omap3_beagle_devices));
omap_board_config = omap3_beagle_config;
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap_serial_init();
+
+ omap_cfg_reg(AH8_34XX_GPIO29);
+ gpio_request(29, "mmc0_wp");
+ gpio_direction_input(29);
hsmmc_init();
+
+ omap_cfg_reg(J25_34XX_GPIO170);
+ gpio_request(170, "DVI_nPD");
+ /* REVISIT leave DVI powered down until it's needed ... */
+ gpio_direction_output(170, true);
+
usb_musb_init();
usb_ehci_init();
+ omap3beagle_flash_init();
}
-arch_initcall(omap3_beagle_i2c_init);
-
static void __init omap3_beagle_map_io(void)
{
omap2_set_globals_343x();