#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/tsc2301.h>
+#include <linux/spi/tsc2005.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/i2c.h>
-#include <asm/hardware.h>
+#include <linux/i2c/lm8323.h>
+#include <linux/i2c/menelaus.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcspi.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/lcd_mipid.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/blizzard.h>
+#include <mach/gpio.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/lcd_mipid.h>
+#include <mach/clock.h>
+#include <mach/gpio-switch.h>
+#include <mach/omapfb.h>
+#include <mach/blizzard.h>
#include <../drivers/cbus/tahvo.h>
#include <../drivers/media/video/tcm825x.h>
#define N800_DAV_IRQ_GPIO 103
#define N800_TSC2301_RESET_GPIO 118
+#ifdef CONFIG_MACH_NOKIA_N810
+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
+ [0x01] = KEY_Q,
+ [0x02] = KEY_K,
+ [0x03] = KEY_O,
+ [0x04] = KEY_P,
+ [0x05] = KEY_BACKSPACE,
+ [0x06] = KEY_A,
+ [0x07] = KEY_S,
+ [0x08] = KEY_D,
+ [0x09] = KEY_F,
+ [0x0a] = KEY_G,
+ [0x0b] = KEY_H,
+ [0x0c] = KEY_J,
+
+ [0x11] = KEY_W,
+ [0x12] = KEY_F4,
+ [0x13] = KEY_L,
+ [0x14] = KEY_APOSTROPHE,
+ [0x16] = KEY_Z,
+ [0x17] = KEY_X,
+ [0x18] = KEY_C,
+ [0x19] = KEY_V,
+ [0x1a] = KEY_B,
+ [0x1b] = KEY_N,
+ [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
+ [0x1f] = KEY_F7,
+
+ [0x21] = KEY_E,
+ [0x22] = KEY_SEMICOLON,
+ [0x23] = KEY_MINUS,
+ [0x24] = KEY_EQUAL,
+ [0x2b] = KEY_FN,
+ [0x2c] = KEY_M,
+ [0x2f] = KEY_F8,
+
+ [0x31] = KEY_R,
+ [0x32] = KEY_RIGHTCTRL,
+ [0x34] = KEY_SPACE,
+ [0x35] = KEY_COMMA,
+ [0x37] = KEY_UP,
+ [0x3c] = KEY_COMPOSE,
+ [0x3f] = KEY_F6,
+
+ [0x41] = KEY_T,
+ [0x44] = KEY_DOT,
+ [0x46] = KEY_RIGHT,
+ [0x4f] = KEY_F5,
+ [0x51] = KEY_Y,
+ [0x53] = KEY_DOWN,
+ [0x55] = KEY_ENTER,
+ [0x5f] = KEY_ESC,
+
+ [0x61] = KEY_U,
+ [0x64] = KEY_LEFT,
+
+ [0x71] = KEY_I,
+ [0x75] = KEY_KPENTER,
+};
+
+static struct lm8323_platform_data lm8323_pdata = {
+ .repeat = 0, /* Repeat is handled in userspace for now. */
+ .keymap = rx44_keymap,
+
+ .name = "Internal keyboard",
+ .pwm1_name = "keyboard",
+ .pwm2_name = "cover",
+};
+#endif
+
void __init nokia_n800_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
.single_channel = 1,
};
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
+static struct tsc2005_platform_data tsc2005_config = {
+ .reset_gpio = 94,
+ .dav_gpio = 106
+};
+
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+#endif
+
static struct spi_board_info n800_spi_board_info[] __initdata = {
- [0] = {
+ {
.modalias = "lcd_mipid",
.bus_num = 1,
.chip_select = 1,
.max_speed_hz = 4000000,
.controller_data= &mipid_mcspi_config,
.platform_data = &n800_mipid_platform_data,
- }, [1] = {
+ }, {
.modalias = "cx3110x",
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 48000000,
.controller_data= &cx3110x_mcspi_config,
- }, [2] = {
+ },
+ {
.modalias = "tsc2301",
.bus_num = 1,
.chip_select = 0,
},
};
+static struct spi_board_info n810_spi_board_info[] __initdata = {
+ {
+ .modalias = "lcd_mipid",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 4000000,
+ .controller_data = &mipid_mcspi_config,
+ .platform_data = &n800_mipid_platform_data,
+ },
+ {
+ .modalias = "cx3110x",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 48000000,
+ .controller_data = &cx3110x_mcspi_config,
+ },
+ {
+ .modalias = "tsc2005",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 6000000,
+ .controller_data = &tsc2005_mcspi_config,
+ .platform_data = &tsc2005_config,
+ },
+};
+
+static void __init tsc2005_set_config(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
+ if (strcmp(conf->panel_name, "lph8923") == 0) {
+ tsc2005_config.ts_x_plate_ohm = 180;
+ tsc2005_config.ts_hw_avg = 0;
+ tsc2005_config.ts_ignore_last = 0;
+ tsc2005_config.ts_touch_pressure = 1500;
+ tsc2005_config.ts_stab_time = 100;
+ tsc2005_config.ts_pressure_max = 2048;
+ tsc2005_config.ts_pressure_fudge = 2;
+ tsc2005_config.ts_x_max = 4096;
+ tsc2005_config.ts_x_fudge = 4;
+ tsc2005_config.ts_y_max = 4096;
+ tsc2005_config.ts_y_fudge = 7;
+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
+ tsc2005_config.ts_x_plate_ohm = 280;
+ tsc2005_config.ts_hw_avg = 0;
+ tsc2005_config.ts_ignore_last = 0;
+ tsc2005_config.ts_touch_pressure = 1500;
+ tsc2005_config.ts_stab_time = 1000;
+ tsc2005_config.ts_pressure_max = 2048;
+ tsc2005_config.ts_pressure_fudge = 2;
+ tsc2005_config.ts_x_max = 4096;
+ tsc2005_config.ts_x_fudge = 4;
+ tsc2005_config.ts_y_max = 4096;
+ tsc2005_config.ts_y_fudge = 7;
+ } else {
+ printk(KERN_ERR "Unknown panel type, set default "
+ "touchscreen configuration\n");
+ tsc2005_config.ts_x_plate_ohm = 200;
+ tsc2005_config.ts_stab_time = 100;
+ }
+#endif
+ }
+}
+
#if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
void retu_keypad_led_set_power(struct omap_pwm_led_platform_data *self,
extern struct tcm825x_platform_data n800_tcm825x_platform_data;
-static struct i2c_board_info __initdata n800_i2c_board_info_2[] = {
-#if defined (CONFIG_VIDEO_TCM825X) || defined (CONFIG_VIDEO_TCM825X_MODULE)
+static struct i2c_board_info __initdata_or_module n8x0_i2c_board_info_2[] = {
{
I2C_BOARD_INFO(TCM825X_NAME, TCM825X_I2C_ADDR),
+#if defined (CONFIG_VIDEO_TCM825X) || defined (CONFIG_VIDEO_TCM825X_MODULE)
.platform_data = &n800_tcm825x_platform_data,
- },
#endif
-#if defined(CONFIG_RADIO_TEA5761) || defined(CONFIG_RADIO_TEA5761_MODULE)
+ },
+ {
+ I2C_BOARD_INFO("tsl2563", 0x29),
+ },
+ {
+ I2C_BOARD_INFO("lp5521", 0x32),
+ },
+};
+
+
+static struct i2c_board_info __initdata_or_module n800_i2c_board_info_2[] = {
{
I2C_BOARD_INFO("tea5761", 0x10),
},
-#endif
+};
+
+static struct i2c_board_info __initdata_or_module n810_i2c_board_info_2[] = {
+ {
+ I2C_BOARD_INFO("lm8323", 0x45),
+ .irq = OMAP_GPIO_IRQ(109),
+ .platform_data = &lm8323_pdata,
+ },
};
void __init nokia_n800_common_init(void)
n800_dsp_init();
n800_usb_init();
n800_cam_init();
- spi_register_board_info(n800_spi_board_info,
+ if (machine_is_nokia_n800())
+ spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
+ if (machine_is_nokia_n810()) {
+ tsc2005_set_config();
+ spi_register_board_info(n810_spi_board_info,
+ ARRAY_SIZE(n810_spi_board_info));
+ }
omap_serial_init();
omap_register_i2c_bus(1, 400, n800_i2c_board_info_1,
ARRAY_SIZE(n800_i2c_board_info_1));
- omap_register_i2c_bus(2, 400, n800_i2c_board_info_2,
+ omap_register_i2c_bus(2, 400, n8x0_i2c_board_info_2,
ARRAY_SIZE(n800_i2c_board_info_2));
+ if (machine_is_nokia_n800())
+ i2c_register_board_info(2, n800_i2c_board_info_2,
+ ARRAY_SIZE(n800_i2c_board_info_2));
+ if (machine_is_nokia_n810())
+ i2c_register_board_info(2, n810_i2c_board_info_2,
+ ARRAY_SIZE(n810_i2c_board_info_2));
+
mipid_dev_init();
blizzard_dev_init();
}
projects / linux-2.6-omap-h63xx.git / blobdiff