ARM: OMAP: No need to include board-h4.h from hardware.h

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / board-h4.c

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index cb5c09b03243b6963e3d7eceaadb177528050a37..dd55149a8b89d499447b9deff9755bc552090099 100644 (file)
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -54,6 +54,51 @@
 #define H4_FLASH_CS    0
 #define H4_SMC91X_CS   1
 
+#define H4_ETHR_GPIO_IRQ               92
+
+/* FPGA on debug board has 32 GPIOs:  16 dedicated to leds,
+ * 8 outputs on a header, and 6 inputs from a DIP switch.
+ */
+#define H4_DEBUG_GPIO_BASE             OMAP_MAX_GPIO_LINES
+#      define H4_DEBUG_GPIO_SW3_1      (H4_DEBUG_GPIO_BASE + 24)
+#      define H4_DEBUG_GPIO_SW3_2      (H4_DEBUG_GPIO_BASE + 25)
+#      define H4_DEBUG_GPIO_SW3_3      (H4_DEBUG_GPIO_BASE + 26)
+#      define H4_DEBUG_GPIO_SW3_4      (H4_DEBUG_GPIO_BASE + 27)
+#      define H4_DEBUG_GPIO_SW3_5      (H4_DEBUG_GPIO_BASE + 28)
+#      define H4_DEBUG_GPIO_SW3_8      (H4_DEBUG_GPIO_BASE + 29)
+
+/* H4 baseboard has 3 PCF8574 (8 bit) I2C GPIO expanders */
+#define H4_U191_GPIO_BASE              (H4_DEBUG_GPIO_BASE + 32)
+#      define H4_GPIO_IRDA_FIRSEL      (H4_U191_GPIO_BASE + 0)
+#      define H4_GPIO_MODEM_MOD_EN     (H4_U191_GPIO_BASE + 1)
+#      define H4_GPIO_WLAN_MOD_EN      (H4_U191_GPIO_BASE + 2)
+#      define H4_GPIO_CAM_MODULE_EN    (H4_U191_GPIO_BASE + 3)
+#      define H4_GPIO_HANDSET_EN       (H4_U191_GPIO_BASE + 4)
+#      define H4_GPIO_LCD_ENBKL        (H4_U191_GPIO_BASE + 5)
+#      define H4_GPIO_AUDIO_ENVDD      (H4_U191_GPIO_BASE + 6)
+#      define H4_GPIO_LCD_ENVDD        (H4_U191_GPIO_BASE + 7)
+
+#define H4_U192_GPIO_BASE              (H4_U191_GPIO_BASE + 8)
+#      define H4_GPIO_IRDA_AGPSn       (H4_U192_GPIO_BASE + 0)
+#      define H4_GPIO_AGPS_PWREN       (H4_U192_GPIO_BASE + 1)
+#      define H4_GPIO_AGPS_RSTn        (H4_U192_GPIO_BASE + 2)
+#      define H4_GPIO_AGPS_SLEEP       (H4_U192_GPIO_BASE + 3)
+#      define H4_GPIO_AGPS_PA_XMT      (H4_U192_GPIO_BASE + 4)
+#      define H4_GPIO_MODEM_SPR2       (H4_U192_GPIO_BASE + 5)
+#      define H4_GPIO_MODEM_SPR1       (H4_U192_GPIO_BASE + 6)
+#      define H4_GPIO_BT_ACLK_ENn      (H4_U192_GPIO_BASE + 7)
+
+#define H4_U193_GPIO_BASE              (H4_U192_GPIO_BASE + 8)
+#      define H4_GPIO_SPR0             (H4_U193_GPIO_BASE + 0)
+#      define H4_GPIO_SPR1             (H4_U193_GPIO_BASE + 1)
+#      define H4_GPIO_WLAN_SHUTDOWN    (H4_U193_GPIO_BASE + 2)
+#      define H4_GPIO_WLAN_RESET       (H4_U193_GPIO_BASE + 3)
+#      define H4_GPIO_WLAN_CLK_ENn     (H4_U193_GPIO_BASE + 4)
+       /* 5, 6 not connected */
+#      define H4_GPIO_CAM_RST          (H4_U193_GPIO_BASE + 7)
+
+extern void h4_mmc_init(void);
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -326,7 +371,7 @@ static inline void __init h4_init_debug(void)
        udelay(100);
 
        omap_cfg_reg(M15_24XX_GPIO92);
-       if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+       if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
                gpmc_cs_free(eth_cs);
 
 out: