omap: Add basic support for Pandora handheld console

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap2 / Kconfig

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 752dd6e75826776757472f166ef45220257ccf91..fd62c7ebf0b25910c49eee9b62d3bf742449d35f 100644 (file)
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,18 +14,65 @@ config ARCH_OMAP2420
 config ARCH_OMAP2430
        bool "OMAP2430 support"
        depends on ARCH_OMAP24XX
+       select ARCH_OMAP_OTG
+
+config ARCH_OMAP34XX
+       bool "OMAP34xx Based System"
+       depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+       bool "OMAP3430 support"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+       select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
-       depends on ARCH_OMAP2
+       depends on ARCH_OMAP2 || ARCH_OMAP3
 
 config MACH_OMAP_GENERIC
        bool "Generic OMAP board"
        depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_NOKIA_N800
+       bool "Nokia N800"
+       depends on ARCH_OMAP2420
+       select VIDEO_TCM825X if VIDEO_OMAP2 && VIDEO_HELPER_CHIPS_AUTO
+       select CBUS if VIDEO_TCM825X
+       select CBUS_RETU if VIDEO_TCM825X
+       select MENELAUS if VIDEO_TCM825X
+       select OMAP_GPIO_SWITCH
+
+config MACH_NOKIA_N810
+       bool "Nokia N810"
+       depends on MACH_NOKIA_N800
+
+config MACH_NOKIA_N810_WIMAX
+       bool "Nokia N810 WiMAX"
+       depends on MACH_NOKIA_N800
+       select MACH_NOKIA_N810
+
+config MACH_OMAP2_TUSB6010
+       bool
+       depends on ARCH_OMAP2 && ARCH_OMAP2420
+       default y if MACH_NOKIA_N800
+
 config MACH_OMAP_H4
        bool "OMAP 2420 H4 board"
-       depends on ARCH_OMAP2 && ARCH_OMAP24XX
+       depends on ARCH_OMAP2 && ARCH_OMAP2420
        select OMAP_DEBUG_DEVICES
+       select GPIOEXPANDER_OMAP
+
+config MACH_OMAP_H4_TUSB
+       bool "TUSB 6010 EVM board"
+       depends on MACH_OMAP_H4
+       select MACH_OMAP2_TUSB6010
+       help
+         Set this if you've got a TUSB6010 high speed USB board.
+         You may need to consult the schematics for your revisions
+         of the Menelaus and TUSB boards, and make changes to be
+         sure this is set up properly for your board stack.
+
+         Be sure to select OTG mode operation, not host-only or
+         peripheral-only.
 
 config MACH_OMAP_H4_OTG
        bool "Use USB OTG connector, not device connector (S1.10)"
@@ -50,17 +97,52 @@ config MACH_OMAP2_H4_USB1
 
 config MACH_OMAP_APOLLON
        bool "OMAP 2420 Apollon board"
-       depends on ARCH_OMAP2 && ARCH_OMAP24XX
+       depends on ARCH_OMAP2 && ARCH_OMAP2420
 
 config MACH_OMAP_2430SDP
        bool "OMAP 2430 SDP board"
+       depends on ARCH_OMAP2 && ARCH_OMAP2430
+
+config MACH_OMAP_LDP
+       bool "OMAP3 LDP board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP2EVM 
+       bool "OMAP 2530 EVM board"
        depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
-config MACH_NOKIA_N800
-       bool "Nokia N800"
-       depends on ARCH_OMAP24XX
+config MACH_OMAP_3430SDP
+       bool "OMAP 3430 SDP board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP3EVM
+       bool "OMAP 3530 EVM board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP3_BEAGLE
+       bool "OMAP3 BEAGLE board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OVERO
+       bool "Gumstix Overo board"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP3_PANDORA
+       bool "OMAP3 Pandora"
+       depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config OMAP_TICK_GPTIMER
+       int "GPTIMER used for system tick timer"
+       depends on ARCH_OMAP2 || ARCH_OMAP3
+       range 1 12
+       default 1
+       help
+         Linux uses one of the twelve on-board OMAP GPTIMER blocks to generate
+         system tick interrupts.  The twelve GPTIMERs have slightly
+         different powerdomain, source clock, and security properties
+         (mostly documented in the OMAP3 TRMs) that can affect the selection
+         of which GPTIMER to use.  The historical default is GPTIMER1.
+         If CONFIG_OMAP_32K_TIMER is selected, Beagle may require GPTIMER12
+         due to hardware sensitivity to glitches on the OMAP 32kHz clock
+         input.
 
-config MACH_OMAP2_TUSB6010
-       bool
-       depends on ARCH_OMAP2 && ARCH_OMAP2420
-       default y if MACH_NOKIA_N800
\ No newline at end of file