ARM: OMAP: No need to include board-osk.h from hardware.h

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap1 / board-osk.c

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ff9e67baa5c9f2c818b64c643c23e1bb622abca8..9c4cac274cc0ddc69526e1c36687fe3c27124fd0 100644 (file)
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,8 +51,20 @@
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START            0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE              (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#      define OSK_TPS_GPIO_USB_PWR_EN  (OSK_TPS_GPIO_BASE + 0)
+#      define OSK_TPS_GPIO_LED_D3      (OSK_TPS_GPIO_BASE + 1)
+#      define OSK_TPS_GPIO_LAN_RESET   (OSK_TPS_GPIO_BASE + 2)
+#      define OSK_TPS_GPIO_DSP_PWR_EN  (OSK_TPS_GPIO_BASE + 3)
+#      define OSK_TPS_GPIO_LED_D9      (OSK_TPS_GPIO_BASE + 4)
+#      define OSK_TPS_GPIO_LED_D2      (OSK_TPS_GPIO_BASE + 5)
 
 static struct mtd_partition osk_partitions[] = {
        /* bootloader (U-Boot, etc) in first sector */
@@ -141,47 +153,10 @@ static struct platform_device osk5912_cf_device = {
        .resource       = osk5912_cf_resources,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-           RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-       .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-           XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-       .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-       /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-       .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "OSK AIC23",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* aic23_configure, */
-       .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-       .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-       .codec_clock_on         = NULL, /* aic23_clock_on, */
-       .codec_clock_off        = NULL, /* aic23_clock_off, */
-       .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
        &osk5912_flash_device,
        &osk5912_smc91x_device,
        &osk5912_cf_device,
-       &osk5912_mcbsp1_device,
 };
 
 static struct gpio_led tps_leds[] = {
@@ -259,8 +234,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
                .platform_data  = &tps_board,
 
        },
+       {
+               I2C_BOARD_INFO("tlv320aic23", 0x1B),
+       },
        /* TODO when driver support is ready:
-        *  - aic23 audio chip at 0x1a
         *  - optionally on Mistral, ov9640 camera sensor at 0x30
         */
 };