REMOVE OMAP LEGACY CODE: Reset mach-omap1/board-*.c files to mainline

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap1 / board-h3.c

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index adfcd7b513930cdaa677aa835e7e3d24f9d1171d..bf08b6ad22eef530cf5c04e10229376ada2fd3f0 100644 (file)
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -49,8 +49,6 @@
 #include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO     48
 
@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
        },
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-       .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-       .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(15),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-       .pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
-       /*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "H3 TSC2101",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* tsc2101_configure, */
-       .codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-       .codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-       .codec_clock_on         = NULL, /* tsc2101_clock_on, */
-       .codec_clock_off        = NULL, /* tsc2101_clock_off, */
-       .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct platform_device *devices[] __initdata = {
        &nor_device,
        &nand_device,
@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = {
        &h3_irda_device,
        &h3_kp_device,
        &h3_lcd_device,
-       &h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -447,15 +409,6 @@ static struct omap_usb_config h3_usb_config __initdata = {
        .pins[1]        = 3,
 };
 
-static struct omap_mmc_config h3_mmc_config __initdata = {
-       .mmc[0] = {
-               .enabled        = 1,
-               .wire4          = 1,
-       },
-};
-
-extern struct omap_mmc_platform_data h3_mmc_data;
-
 static struct omap_uart_config h3_uart_config __initdata = {
        .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -466,7 +419,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
        { OMAP_TAG_USB,         &h3_usb_config },
-       { OMAP_TAG_MMC,         &h3_mmc_config },
        { OMAP_TAG_UART,        &h3_uart_config },
        { OMAP_TAG_LCD,         &h3_lcd_config },
 };
@@ -482,23 +434,11 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
        },
 };
 
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
-       {
-               .name                   = "mmc_slot",
-               .gpio                   = OMAP_MPUIO(1),
-               .type                   = OMAP_GPIO_SWITCH_TYPE_COVER,
-               .debounce_rising        = 100,
-               .debounce_falling       = 0,
-               .notify                 = h3_mmc_slot_cover_handler,
-               .notify_data            = NULL,
-       },
-};
-
 #define H3_NAND_RB_GPIO_PIN    10
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-       return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN);
+       return gpio_get_value(H3_NAND_RB_GPIO_PIN);
 }
 
 static void __init h3_init(void)
@@ -516,8 +456,9 @@ static void __init h3_init(void)
 
        nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
        nand_resource.end += SZ_4K - 1;
-       if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN)))
-               nand_data.dev_ready = nand_dev_ready;
+       if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+               BUG();
+       nand_data.dev_ready = nand_dev_ready;
 
        /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
        /* GPIO10 pullup/down register, Enable pullup on GPIO10 */
@@ -537,7 +478,7 @@ static void __init h3_init(void)
 static void __init h3_init_smc91x(void)
 {
        omap_cfg_reg(W15_1710_GPIO40);
-       if (omap_request_gpio(40) < 0) {
+       if (gpio_request(40, "SMC91x irq") < 0) {
                printk("Error requesting gpio 40 for smc91x irq\n");
                return;
        }