ARM: OMAP1: Misc clean-up

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap1 / board-h3.c

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7cf6ccd4e7ffd89858c7b7633e59082f0383b630..6fc516855a8cec0bc93b6cda648da65c2d001fe2 100644 (file)
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -51,8 +51,6 @@
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
-extern int omap_gpio_init(void);
-
 static int h3_keymap[] = {
        KEY(0, 0, KEY_LEFT),
        KEY(0, 1, KEY_RIGHT),
@@ -452,26 +450,13 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
        .ctrl_name      = "internal",
 };
 
-static struct omap_board_config_kernel h3_config[] = {
+static struct omap_board_config_kernel h3_config[] __initdata = {
        { OMAP_TAG_USB,         &h3_usb_config },
        { OMAP_TAG_MMC,         &h3_mmc_config },
        { OMAP_TAG_UART,        &h3_uart_config },
        { OMAP_TAG_LCD,         &h3_lcd_config },
 };
 
-static struct i2c_board_info __initdata h3_i2c_board_info[] = {
-       {
-               I2C_BOARD_INFO("tps65010", 0x48),
-               .type           = "tps65013",
-               /* .irq         = OMAP_GPIO_IRQ(??), */
-       },
-       /* TODO when driver support is ready:
-        *  - isp1301 OTG transceiver
-        *  - optional ov9640 camera sensor at 0x30
-        *  - ...
-        */
-};
-
 static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
        {
                .name                   = "mmc_slot",
@@ -514,6 +499,8 @@ static void __init h3_init(void)
        omap_cfg_reg(V2_1710_GPIO10);
 
        platform_add_devices(devices, ARRAY_SIZE(devices));
+       spi_register_board_info(h3_spi_board_info,
+                               ARRAY_SIZE(h3_spi_board_info));
        omap_board_config = h3_config;
        omap_board_config_size = ARRAY_SIZE(h3_config);
        omap_serial_init();
@@ -544,23 +531,6 @@ static void __init h3_map_io(void)
        omap1_map_common_io();
 }
 
-#ifdef CONFIG_TPS65010
-static int __init h3_tps_init(void)
-{
-       if (!machine_is_omap_h3())
-               return 0;
-
-       /* gpio4 for SD, gpio3 for VDD_DSP */
-       /* FIXME send power to DSP iff it's configured */
-
-       /* Enable LOW_PWR */
-       tps65013_set_low_pwr(ON);
-
-       return 0;
-}
-fs_initcall(h3_tps_init);
-#endif
-
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
        /* Maintainer: Texas Instruments, Inc. */
        .phys_io        = 0xfff00000,