ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap1 / board-h2.c

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index bfa04fa25524c23b5a0ede5a41313fe1a529f5bd..1a69002e3f8040757e9c4cb6ab58f1f9f2443819 100644 (file)
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -39,6 +39,7 @@
 
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
+#include <asm/arch/nand.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/keypad.h>
@@ -140,8 +141,6 @@ static struct platform_device h2_nor_device = {
        .resource       = &h2_nor_resource,
 };
 
-#if 0  /* REVISIT: Enable when nand_platform_data is applied */
-
 static struct mtd_partition h2_nand_partitions[] = {
 #if 0
        /* REVISIT:  enable these partitions if you make NAND BOOT
@@ -179,7 +178,7 @@ static struct mtd_partition h2_nand_partitions[] = {
 };
 
 /* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
-static struct nand_platform_data h2_nand_data = {
+static struct omap_nand_platform_data h2_nand_data = {
        .options        = NAND_SAMSUNG_LP_OPTIONS,
        .parts          = h2_nand_partitions,
        .nr_parts       = ARRAY_SIZE(h2_nand_partitions),
@@ -198,7 +197,6 @@ static struct platform_device h2_nand_device = {
        .num_resources  = 1,
        .resource       = &h2_nand_resource,
 };
-#endif
 
 static struct resource h2_smc91x_resources[] = {
        [0] = {
@@ -335,7 +333,7 @@ static struct platform_device h2_mcbsp1_device = {
 
 static struct platform_device *h2_devices[] __initdata = {
        &h2_nor_device,
-       //&h2_nand_device,
+       &h2_nand_device,
        &h2_smc91x_device,
        &h2_irda_device,
        &h2_kp_device,
@@ -409,15 +407,15 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-       { OMAP_TAG_USB,           &h2_usb_config },
-       { OMAP_TAG_MMC,           &h2_mmc_config },
+       { OMAP_TAG_USB,         &h2_usb_config },
+       { OMAP_TAG_MMC,         &h2_mmc_config },
        { OMAP_TAG_UART,        &h2_uart_config },
        { OMAP_TAG_LCD,         &h2_lcd_config },
 };
 
 #define H2_NAND_RB_GPIO_PIN    62
 
-static int h2_nand_dev_ready(struct nand_platform_data *data)
+static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
 {
        return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
 }
@@ -436,12 +434,10 @@ static void __init h2_init(void)
        h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
        h2_nor_resource.end += SZ_32M - 1;
 
-#if 0  /* REVISIT: Enable when nand_platform_data is applied */
        h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
        h2_nand_resource.end += SZ_4K - 1;
        if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
                h2_nand_data.dev_ready = h2_nand_dev_ready;
-#endif
 
        omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
        omap_cfg_reg(M8_1610_FLASH_CS2B_WE);