ARM: OMAP: Remove unused platform devices, v3

[linux-2.6-omap-h63xx.git] / arch / arm / mach-omap1 / board-h2.c

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 125d8e21dceab99a17b347c8a34ebc862d6dd87d..0d784a79509294d417263ad4ec57582faa87b0d6 100644 (file)
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,16 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio-switch.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
        KEY(0, 0, KEY_LEFT),
@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = {
        .id             = -1,
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-       .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-       .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(15),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-       .pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-       /*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "H2 TSC2101",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* tsc2101_configure, */
-       .codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-       .codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-       .codec_clock_on         = NULL, /* tsc2101_clock_on, */
-       .codec_clock_off        = NULL, /* tsc2101_clock_off, */
-       .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct platform_device *h2_devices[] __initdata = {
        &h2_nor_device,
        &h2_nand_device,
@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = {
        &h2_irda_device,
        &h2_kp_device,
        &h2_lcd_device,
-       &h2_mcbsp1_device,
 };
 
 static void __init h2_init_smc91x(void)
@@ -345,10 +307,25 @@ static void __init h2_init_smc91x(void)
        }
 }
 
+static int tps_setup(struct i2c_client *client, void *context)
+{
+       tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
+                               TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
+
+       return 0;
+}
+
+static struct tps65010_board tps_board = {
+       .base           = H2_TPS_GPIO_BASE,
+       .outmask        = 0x0f,
+       .setup          = tps_setup,
+};
+
 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
        {
                I2C_BOARD_INFO("tps65010", 0x48),
                .irq            = OMAP_GPIO_IRQ(58),
+               .platform_data  = &tps_board,
        }, {
                I2C_BOARD_INFO("isp1301_omap", 0x2d),
                .irq            = OMAP_GPIO_IRQ(2),
@@ -394,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 #define H2_NAND_RB_GPIO_PIN    62
 
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
-       return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
 static void __init h2_init(void)
 {
        /* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped