Merge branch 'origin' into devel

[linux-2.6-omap-h63xx.git] / arch / arm / mach-kirkwood / rd88f6281-setup.c

diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9a0e905d10cd04e6841f8dc7f5cc7bb6c57fa705..31e996d65fc46523845420eac063a29fcacaef40 100644 (file)
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -11,21 +11,20 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 static struct mtd_partition rd88f6281_nand_parts[] = {
        {
@@ -75,7 +74,7 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
        .duplex         = DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f6281_switch_data = {
+static struct dsa_chip_data rd88f6281_switch_chip_data = {
        .port_names[0]  = "lan1",
        .port_names[1]  = "lan2",
        .port_names[2]  = "lan3",
@@ -83,6 +82,11 @@ static struct dsa_platform_data rd88f6281_switch_data = {
        .port_names[5]  = "cpu",
 };
 
+static struct dsa_platform_data rd88f6281_switch_plat_data = {
+       .nr_chips       = 1,
+       .chip           = &rd88f6281_switch_chip_data,
+};
+
 static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
 };
@@ -91,6 +95,15 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
        .n_ports        = 2,
 };
 
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+       .gpio_card_detect = 28,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+       MPP28_GPIO,
+       0
+};
+
 static void __init rd88f6281_init(void)
 {
        u32 dev, rev;
@@ -99,21 +112,22 @@ static void __init rd88f6281_init(void)
         * Basic setup. Needs to be called early.
         */
        kirkwood_init();
+       kirkwood_mpp_conf(rd88f6281_mpp_config);
 
        kirkwood_ehci_init();
 
        kirkwood_ge00_init(&rd88f6281_ge00_data);
        kirkwood_pcie_id(&dev, &rev);
        if (rev == MV88F6281_REV_A0) {
-               rd88f6281_switch_data.sw_addr = 10;
+               rd88f6281_switch_chip_data.sw_addr = 10;
                kirkwood_ge01_init(&rd88f6281_ge01_data);
        } else {
-               rd88f6281_switch_data.port_names[4] = "wan";
+               rd88f6281_switch_chip_data.port_names[4] = "wan";
        }
-       kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+       kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
 
-       kirkwood_rtc_init();
        kirkwood_sata_init(&rd88f6281_sata_data);
+       kirkwood_sdio_init(&rd88f6281_mvsdio_data);
        kirkwood_uart0_init();
 
        platform_device_register(&rd88f6281_nand_flash);