#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
.virtual = IXP2000_CAP_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
.length = IXP2000_CAP_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_INTCTL_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
.length = IXP2000_INTCTL_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
.length = IXP2000_PCI_CREG_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
.length = IXP2000_PCI_CSR_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_MSF_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
.length = IXP2000_MSF_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_SCRATCH_RING_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
.length = IXP2000_SCRATCH_RING_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_SRAM0_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
.length = IXP2000_SRAM0_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_IO_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
.length = IXP2000_PCI_IO_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
.length = IXP2000_PCI_CFG0_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}, {
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
.length = IXP2000_PCI_CFG1_SIZE,
- .type = MT_DEVICE_IXP2000,
+ .type = MT_DEVICE,
}
};
void __init ixp2000_map_io(void)
{
- /*
- * On IXP2400 CPUs we need to use MT_DEVICE_IXP2000 so that
- * XCB=101 (to avoid triggering erratum #66), and given that
- * this mode speeds up I/O accesses and we have write buffer
- * flushes in the right places anyway, it doesn't hurt to use
- * XCB=101 for all IXP2000s.
- */
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
/* Set slowport to 8-bit mode. */
static int ixp2000_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
/* clear timer 1 */
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
next_jiffy_time -= ticks_per_jiffy;
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
/*
* Then, set the proper trigger type.
*/
- if (type & IRQT_FALLING)
+ if (type & IRQ_TYPE_EDGE_FALLING)
GPIO_IRQ_falling_edge |= 1 << line;
else
GPIO_IRQ_falling_edge &= ~(1 << line);
- if (type & IRQT_RISING)
+ if (type & IRQ_TYPE_EDGE_RISING)
GPIO_IRQ_rising_edge |= 1 << line;
else
GPIO_IRQ_rising_edge &= ~(1 << line);
- if (type & IRQT_LOW)
+ if (type & IRQ_TYPE_LEVEL_LOW)
GPIO_IRQ_level_low |= 1 << line;
else
GPIO_IRQ_level_low &= ~(1 << line);
- if (type & IRQT_HIGH)
+ if (type & IRQ_TYPE_LEVEL_HIGH)
GPIO_IRQ_level_high |= 1 << line;
else
GPIO_IRQ_level_high &= ~(1 << line);