[ARM] 4761/1: [AT91] Board-support for NEW_LEDs

[linux-2.6-omap-h63xx.git] / arch / arm / mach-at91 / board-ek.c

diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 322fdd75a1e431863729b478988cef8d7d8e708d..0574e50a30dd096bbb5f012ac522895518b8a880 100644 (file)
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -109,6 +109,15 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+       {
+               I2C_BOARD_INFO("ics1523", 0x26),
+       },
+       {
+               I2C_BOARD_INFO("dac3550", 0x4d),
+       }
+};
+
 #define EK_FLASH_BASE  AT91_CHIPSELECT_0
 #define EK_FLASH_SIZE  0x200000
 
@@ -132,6 +141,25 @@ static struct platform_device ek_flash = {
        .num_resources  = 1,
 };
 
+static struct gpio_led ek_leds[] = {
+       {       /* "user led 1", DS2 */
+               .name                   = "green",
+               .gpio                   = AT91_PIN_PB0,
+               .active_low             = 1,
+               .default_trigger        = "mmc0",
+       },
+       {       /* "user led 2", DS4 */
+               .name                   = "yellow",
+               .gpio                   = AT91_PIN_PB1,
+               .active_low             = 1,
+               .default_trigger        = "heartbeat",
+       },
+       {       /* "user led 3", DS6 */
+               .name                   = "red",
+               .gpio                   = AT91_PIN_PB2,
+               .active_low             = 1,
+       }
+};
 
 static void __init ek_board_init(void)
 {
@@ -145,7 +173,7 @@ static void __init ek_board_init(void)
        at91_add_device_udc(&ek_udc_data);
        at91_set_multi_drive(ek_udc_data.pullup_pin, 1);        /* pullup_pin is connected to reset */
        /* I2C */
-       at91_add_device_i2c();
+       at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
        /* SPI */
        at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
@@ -158,6 +186,8 @@ static void __init ek_board_init(void)
 #endif
        /* NOR Flash */
        platform_device_register(&ek_flash);
+       /* LEDs */
+       at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
        /* VGA */
 //     ek_add_device_video();
 }