[ARM] 5263/2: [AT91] GPIO buttons as wakeup sources

[linux-2.6-omap-h63xx.git] / arch / arm / mach-at91 / board-csb337.c

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 81f1ebb4e964ed3c3228bb4c1b2a370b982ca39b..fea2529ebcf9c781acb131aa7a1517bfc20ca772 100644 (file)
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,6 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -114,7 +114,7 @@ static struct spi_board_info csb337_spi_devices[] = {
 };
 
 #define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE 0x800000
+#define CSB_FLASH_SIZE SZ_8M
 
 static struct mtd_partition csb_flash_partitions[] = {
        {
@@ -193,11 +193,11 @@ static struct platform_device csb300_button_device = {
 
 static void __init csb300_add_device_buttons(void)
 {
-       at91_set_gpio_input(AT91_PIN_PB29, 0);  /* sw0 */
+       at91_set_gpio_input(AT91_PIN_PB29, 1);  /* sw0 */
        at91_set_deglitch(AT91_PIN_PB29, 1);
-       at91_set_gpio_input(AT91_PIN_PB28, 0);  /* sw1 */
+       at91_set_gpio_input(AT91_PIN_PB28, 1);  /* sw1 */
        at91_set_deglitch(AT91_PIN_PB28, 1);
-       at91_set_gpio_input(AT91_PIN_PA21, 0);  /* sw2 */
+       at91_set_gpio_input(AT91_PIN_PA21, 1);  /* sw2 */
        at91_set_deglitch(AT91_PIN_PA21, 1);
 
        platform_device_register(&csb300_button_device);
@@ -224,7 +224,7 @@ static struct gpio_led csb_leds[] = {
                .gpio                   = AT91_PIN_PB0,
                .active_low             = 1,
                .default_trigger        = "ide-disk",
-       },
+       }
 };