[ARM] 4372/1: Define byte sizes in asm-arm/sizes.h

[linux-2.6-omap-h63xx.git] / arch / arm / mach-at91 / at91sam9260_devices.c

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index f7d342ccbebf823db392f75759cd6417b5a782d5..ffd3154c1e5404f2a305b4b4e8ece8b739ad8b02 100644 (file)
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -22,9 +22,6 @@
 
 #include "generic.h"
 
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16  0x00000010
 
 /* --------------------------------------------------------------------
  *  USB Host
@@ -320,16 +317,16 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
                        | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
 
-       at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-                       | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+       at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+                       | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-       at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+       at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
        if (data->bus_width_16)
                mode = AT91_SMC_DBW_16;
        else
                mode = AT91_SMC_DBW_8;
-       at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+       at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 
        /* enable pin */
        if (data->enable_pin)