mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
mov pc, r12
+__armv7_mmu_cache_on:
+ mov r12, lr
+ mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
+ tst r11, #0xf @ VMSA
+ blne __setup_mmu
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ tst r11, #0xf @ VMSA
+ mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
+ orr r0, r0, #0x003c @ write buffer
+ orrne r0, r0, #1 @ MMU enabled
+ movne r1, #-1
+ mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
+ mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcr p15, 0, r0, c1, c0, 0 @ load control register
+ mrc p15, 0, r0, c1, c0, 0 @ and read it back
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
+ mov pc, r12
+
__arm6_mmu_cache_on:
mov r12, lr
bl __setup_mmu
b __armv4_mmu_cache_flush
.word 0x0007b000 @ ARMv6
- .word 0x0007f000
+ .word 0x000ff000
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
b __armv6_mmu_cache_flush
+ .word 0x000f0000 @ new CPU Id
+ .word 0x000f0000
+ b __armv7_mmu_cache_on
+ b __armv7_mmu_cache_off
+ b __armv7_mmu_cache_flush
+
.word 0 @ unrecognised type
.word 0
mov pc, lr
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
mov pc, lr
+__armv7_mmu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
+ mov r12, lr
+ bl __armv7_mmu_cache_flush
+ mov r0, #0
+ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
+ mov pc, r12
+
__arm6_mmu_cache_off:
mov r0, #0x00000030 @ ARM6 control reg.
b __armv3_mmu_cache_off
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
+__armv7_mmu_cache_flush:
+ mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
+ tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
+ beq hierarchical
+ mov r10, #0
+ mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
+ b iflush
+hierarchical:
+ stmfd sp!, {r0-r5, r7, r9-r11}
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+ beq finished @ if loc is 0, then no need to clean
+ mov r10, #0 @ start clean at cache level 0
+loop1:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache level
+ mov r1, r0, lsr r2 @ extract cache type bits from clidr
+ and r1, r1, #7 @ mask of the bits for current cache only
+ cmp r1, #2 @ see what cache we have at this level
+ blt skip @ skip if no cache, or just i-cache
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr
+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+ and r2, r1, #7 @ extract the length of the cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ ldr r4, =0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size
+ .word 0xe16f5f14 @ clz r5, r4 - find bit position of way size increment
+ ldr r7, =0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the index size
+loop2:
+ mov r9, r4 @ create working copy of max way size
+loop3:
+ orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
+ orr r11, r11, r7, lsl r2 @ factor index number into r11
+ mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
+ subs r9, r9, #1 @ decrement the way
+ bge loop3
+ subs r7, r7, #1 @ decrement the index
+ bge loop2
+skip:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt loop1
+finished:
+ mov r10, #0 @ swith back to cache level 0
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ ldmfd sp!, {r0-r5, r7, r9-r11}
+iflush:
+ mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
+ mcr p15, 0, r10, c7, c10, 4 @ drain WB
+ mov pc, lr
+
__armv4_mmu_cache_flush:
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
projects / linux-2.6-omap-h63xx.git / blobdiff