Merge with ../linux-2.6

[linux-2.6-omap-h63xx.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 12b1d4359b631eccc141b645ab4b0f024201aa52..e86060504d7530e82ab5f18e6e4c61caeb897ebf 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -367,8 +367,8 @@ config NO_IDLE_HZ
 
          Please note that dynamic tick may affect the accuracy of
          timekeeping on some platforms depending on the implementation.
-         Currently at least OMAP platform is known to have accurate
-         timekeeping with dynamic tick.
+         Currently at least OMAP, PXA2xx and SA11x0 platforms are known
+         to have accurate timekeeping with dynamic tick.
 
 config ARCH_DISCONTIGMEM_ENABLE
        bool
@@ -635,10 +635,6 @@ config PM
          and the Battery Powered Linux mini-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>.
 
-         Note that, even if you say N here, Linux on the x86 architecture
-         will issue the hlt instruction if nothing is to be done, thereby
-         sending the processor to sleep and saving power.
-
 config APM
        tristate "Advanced Power Management Emulation"
        depends on PM
@@ -650,12 +646,6 @@ config APM
          battery status information, and user-space programs will receive
          notification of APM "events" (e.g. battery status change).
 
-         If you select "Y" here, you can disable actual use of the APM
-         BIOS by passing the "apm=off" option to the kernel at boot time.
-
-         Note that the APM support is almost completely disabled for
-         machines with more than one CPU.
-
          In order to use APM, you will need supporting software. For location
          and more information, read <file:Documentation/pm.txt> and the
          Battery Powered Linux mini-HOWTO, available from
@@ -665,39 +655,12 @@ config APM
          manpage ("man 8 hdparm") for that), and it doesn't turn off
          VESA-compliant "green" monitors.
 
-         This driver does not support the TI 4000M TravelMate and the ACER
-         486/DX4/75 because they don't have compliant BIOSes. Many "green"
-         desktop machines also don't have compliant BIOSes, and this driver
-         may cause those machines to panic during the boot phase.
-
          Generally, if you don't have a battery in your machine, there isn't
          much point in using this driver and you should say N. If you get
          random kernel OOPSes or reboots that don't seem to be related to
          anything, try disabling/enabling this option (or disabling/enabling
          APM in your BIOS).
 
-         Some other things you should try when experiencing seemingly random,
-         "weird" problems:
-
-         1) make sure that you have enough swap space and that it is
-         enabled.
-         2) pass the "no-hlt" option to the kernel
-         3) switch on floating point emulation in the kernel and pass
-         the "no387" option to the kernel
-         4) pass the "floppy=nodma" option to the kernel
-         5) pass the "mem=4M" option to the kernel (thereby disabling
-         all but the first 4 MB of RAM)
-         6) make sure that the CPU is not over clocked.
-         7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
-         8) disable the cache from your BIOS settings
-         9) install a fan for the video card or exchange video RAM
-         10) install a better fan for the CPU
-         11) exchange RAM chips
-         12) exchange the motherboard.
-
-         To compile this driver as a module, choose M here: the
-         module will be called apm.
-
 endmenu
 
 source "net/Kconfig"
@@ -752,6 +715,8 @@ source "drivers/hwmon/Kconfig"
 
 source "drivers/misc/Kconfig"
 
+source "drivers/mfd/Kconfig"
+
 source "drivers/media/Kconfig"
 
 source "drivers/video/Kconfig"