bool
default y
select RTC_LIB
+ select SYS_SUPPORTS_APM_EMULATION
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config SYS_SUPPORTS_APM_EMULATION
+ bool
+
+config GENERIC_GPIO
+ bool
+ default n
+
config GENERIC_TIME
bool
default n
+config GENERIC_CLOCKEVENTS
+ bool
+ default n
+
config MMU
bool
default y
+config NO_IOPORT
+ bool
+ default n
+
config EISA
bool
---help---
bool
default y
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
config TRACE_IRQFLAGS_SUPPORT
bool
default y
bool
default y
-config GENERIC_BUST_SPINLOCK
+config ARCH_MAY_HAVE_PC_FDC
bool
-config ARCH_MAY_HAVE_PC_FDC
+config ZONE_DMA
bool
+ default y
config GENERIC_ISA_DMA
bool
select ARM_AMBA
select ARM_VIC
select ICST307
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
This enables support for ARM Ltd Versatile board.
config ARCH_AT91
bool "Atmel AT91"
+ select GENERIC_GPIO
help
This enables support for systems based on the Atmel AT91RM9200
and AT91SAM9xxx processors.
bool "Cirrus CL-PS7500FE"
select TIMER_ACORN
select ISA
+ select NO_IOPORT
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_EBSA110
bool "EBSA-110"
select ISA
+ select NO_IOPORT
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
help
Support for Motorola's i.MX family of processors (MX1, MXL).
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
+ select PCI
+ select ARCH_SUPPORTS_MSI
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
+
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
help
Support for Intel's IOP33X (XScale) family of processors.
-config ARCH_IOP13XX
- bool "IOP13xx-based"
- depends on MMU
- select PLAT_IOP
- select PCI
- help
- Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IXP4XX
- bool "IXP4xx-based"
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
depends on MMU
- select GENERIC_TIME
+ select PCI
help
- Support for Intel's IXP4XX (XScale) family of processors.
+ Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
-config ARCH_IXP23XX
- bool "IXP23XX-based"
+config ARCH_IXP4XX
+ bool "IXP4xx-based"
depends on MMU
- select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Intel's IXP23xx (XScale) family of processors.
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
help
bool "PXA2xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select GENERIC_GPIO
select GENERIC_TIME
help
Support for Intel's PXA2XX processor line.
select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ISA_DMA_API
+ select NO_IOPORT
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ISA
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_MTD_XIP
+ select GENERIC_GPIO
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+ select GENERIC_GPIO
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
core with a wide array of integrated devices for
hand-held and low-power applications.
+config ARCH_DAVINCI
+ bool "TI DaVinci"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for TI's DaVinci platform.
+
config ARCH_OMAP
bool "TI OMAP"
+ select GENERIC_GPIO
+ select GENERIC_TIME
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
source "arch/arm/mach-ns9xxx/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
config IWMMXT
bool "Enable iWMMXt support"
- depends CPU_XSCALE || CPU_XSC3
+ depends on CPU_XSCALE || CPU_XSC3
default y if PXA27x
help
Enable support for iWMMXt context switching at run time if
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
menu "Kernel Features"
+source "kernel/time/Kconfig"
+
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && REALVIEW_MPCORE
config NO_IDLE_HZ
bool "Dynamic tick timer"
+ depends on !GENERIC_CLOCKEVENTS
help
Select this option if you want to disable continuous timer ticks
and have them programmed to occur as required. This option saves
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4
+ ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_KS8695
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
config LEDS_TIMER
bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
+ OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
+ || MACH_OMAP_PERSEUS2
depends on LEDS
+ depends on !GENERIC_CLOCKEVENTS
default y if ARCH_EBSA110
help
If you say Y here, one of the system LEDs (the green one on the
config LEDS_CPU
bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
+ !ARCH_OMAP) \
+ || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
+ || MACH_OMAP_PERSEUS2
depends on LEDS
help
If you say Y here, the red LED will be used to give a good real
source "kernel/power/Kconfig"
-config APM
- tristate "Advanced Power Management Emulation"
- ---help---
- APM is a BIOS specification for saving power using several different
- techniques. This is mostly useful for battery powered laptops with
- APM compliant BIOSes. If you say Y here, the system time will be
- reset after a RESUME operation, the /proc/apm device will provide
- battery status information, and user-space programs will receive
- notification of APM "events" (e.g. battery status change).
-
- In order to use APM, you will need supporting software. For location
- and more information, read <file:Documentation/pm.txt> and the
- Battery Powered Linux mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver does not spin down disk drives (see the hdparm(8)
- manpage ("man 8 hdparm") for that), and it doesn't turn off
- VESA-compliant "green" monitors.
-
- Generally, if you don't have a battery in your machine, there isn't
- much point in using this driver and you should say N. If you get
- random kernel OOPSes or reboots that don't seem to be related to
- anything, try disabling/enabling this option (or disabling/enabling
- APM in your BIOS).
-
endmenu
source "net/Kconfig"
source "drivers/rtc/Kconfig"
+if ARCH_OMAP
+source "drivers/cbus/Kconfig"
+endif
+
endmenu
source "fs/Kconfig"
projects / linux-2.6-omap-h63xx.git / blobdiff