[ARM] 4764/1: [AT91] AT91CAP9 core support

[linux-2.6-omap-h63xx.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 691aae309c8af1f04ec2cfafcae74fb1b482fd3a..0bd479c47651f311d41dfd1d78b40775756bbbaf 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -180,8 +180,8 @@ config ARCH_AT91
        bool "Atmel AT91"
        select GENERIC_GPIO
        help
-         This enables support for systems based on the Atmel AT91RM9200
-         and AT91SAM9xxx processors.
+         This enables support for systems based on the Atmel AT91RM9200,
+         AT91SAM9 and AT91CAP9 processors.
 
 config ARCH_CLPS7500
        bool "Cirrus CL-PS7500FE"
@@ -318,6 +318,9 @@ config ARCH_KS8695
 
 config ARCH_NS9XXX
        bool "NetSilicon NS9xxx"
+       select GENERIC_GPIO
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
        help
          Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
          System.
@@ -336,14 +339,14 @@ config ARCH_PNX4008
          This enables support for Philips PNX4008 mobile platform.
 
 config ARCH_PXA
-       bool "PXA2xx-based"
+       bool "PXA2xx/PXA3xx-based"
        depends on MMU
        select ARCH_MTD_XIP
        select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        help
-         Support for Intel's PXA2XX processor line.
+         Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_RPC
        bool "RiscPC"
@@ -486,7 +489,7 @@ source arch/arm/mm/Kconfig
 config IWMMXT
        bool "Enable iWMMXt support"
        depends on CPU_XSCALE || CPU_XSC3
-       default y if PXA27x
+       default y if PXA27x || PXA3xx
        help
          Enable support for iWMMXt context switching at run time if
          running on a CPU that supports it.
@@ -534,7 +537,7 @@ config ISA_DMA_API
        bool
 
 config PCI
-       bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+       bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
        help
          Find out whether you have a PCI motherboard. PCI is the name of a
          bus system, i.e. the way the CPU talks to the other stuff inside
@@ -555,6 +558,12 @@ config PCI_HOST_VIA82C505
        depends on PCI && ARCH_SHARK
        default y
 
+config PCI_HOST_ITE8152
+       bool
+       depends on PCI && MACH_ARMCORE
+       default y
+       select DMABOUNCE
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
@@ -648,6 +657,7 @@ config HZ
        default 128 if ARCH_L7200
        default 200 if ARCH_EBSA110 || ARCH_S3C2410
        default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+       default AT91_TIMER_HZ if ARCH_AT91
        default 100
 
 config AEABI
@@ -848,7 +858,7 @@ config KEXEC
        help
          kexec is a system call that implements the ability to shutdown your
          current kernel, and to start another kernel.  It is like a reboot
-         but it is indepedent of the system firmware.   And like a reboot
+         but it is independent of the system firmware.   And like a reboot
          you can start any kernel with it, not just Linux.
 
          It is an ongoing process to be certain the hardware in a machine
@@ -994,6 +1004,10 @@ source "drivers/pnp/Kconfig"
 
 source "drivers/block/Kconfig"
 
+# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
+
+source "drivers/misc/Kconfig"
+
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
        || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
        || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
@@ -1029,15 +1043,17 @@ source "drivers/spi/Kconfig"
 
 source "drivers/w1/Kconfig"
 
+source "drivers/power/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
-#source "drivers/l3/Kconfig"
+source "drivers/watchdog/Kconfig"
 
-source "drivers/misc/Kconfig"
+source "drivers/ssb/Kconfig"
 
-source "drivers/mfd/Kconfig"
+#source "drivers/l3/Kconfig"
 
-source "drivers/leds/Kconfig"
+source "drivers/mfd/Kconfig"
 
 source "drivers/media/Kconfig"
 
@@ -1051,15 +1067,19 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/leds/Kconfig"
+
 source "drivers/rtc/Kconfig"
 
 source "drivers/dma/Kconfig"
 
+source "drivers/dca/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
 
-source "arch/arm/oprofile/Kconfig"
+source "arch/arm/Kconfig.instrumentation"
 
 source "arch/arm/Kconfig.debug"