acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
+ acpi_new_pts_ordering [HW,ACPI]
+ Enforce the ACPI 2.0 ordering of the _PTS control
+ method wrt putting devices into low power states
+ default: pre ACPI 2.0 ordering of _PTS
+
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
configured. Potentially dangerous and should only be
used if you are entirely sure of the consequences.
+ ccw_timeout_log [S390]
+ See Documentation/s390/CommonIO for details.
+
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
[SPARC64] tick
[X86-64] hpet,tsc
- code_bytes [IA32] How many bytes of object code to print in an
- oops report.
+ clearcpuid=BITNUM [X86]
+ Disable CPUID feature X for the kernel. See
+ include/asm-x86/cpufeature.h for the valid bit numbers.
+ Note the Linux specific bits are not necessarily
+ stable over kernel options, but the vendor specific
+ ones should be.
+ Also note that user programs calling CPUID directly
+ or using the feature without checking anything
+ will still see it. This just prevents it from
+ being used by the kernel or shown in /proc/cpuinfo.
+ Also note the kernel might malfunction if you disable
+ some critical bits.
+
+ code_bytes [IA32/X86_64] How many bytes of object code to print
+ in an oops report.
Range: 0 - 8192
Default: 64
See drivers/char/README.epca and
Documentation/digiepca.txt.
+ disable_mtrr_trim [X86, Intel and AMD only]
+ By default the kernel will trim any uncacheable
+ memory out of your available memory pool based on
+ MTRR settings. This parameter disables that behavior,
+ possibly causing your machine to run very slowly.
+
dmasound= [HW,OSS] Sound subsystem buffers
dscc4.setup= [NET]
gamma= [HW,DRM]
+ gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
+ Format: off | on
+ default: on
+
gdth= [HW,SCSI]
See header of drivers/scsi/gdth.c.
See Documentation/isdn/README.HiSax.
hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
+ hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages.
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
for translation below 32 bit and if not available
then look in the higher range.
+ io_delay= [X86-32,X86-64] I/O delay method
+ 0x80
+ Standard port 0x80 based delay
+ 0xed
+ Alternate port 0xed based delay (needed on some systems)
+ udelay
+ Simple two microseconds delay
+ none
+ No delay
+
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
Multi-Function General Purpose Timers on AMD Geode
platforms.
+ mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when
+ the BIOS has incorrectly applied a workaround. TinyBIOS
+ version 0.98 is known to be affected, 0.99 fixes the
+ problem by letting the user disable the workaround.
+
mga= [HW,DRM]
mousedev.tap_time=
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
+ noefi [X86-32,X86-64] Disable EFI runtime services support.
+
noexec [IA-64]
noexec [X86-32,X86-64]
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
+ noclflush [BUGS=X86] Don't use the CLFLUSH instruction
+
nohlt [BUGS=ARM]
no-hlt [BUGS=X86-32] Tells the kernel that the hlt
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
+ vdso32= [X86-32,X86-64]
+ vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
+ vdso32=1: enable 32-bit VDSO (default)
+ vdso32=0: disable 32-bit VDSO mapping
+
vector= [IA-64,SMP]
vector=percpu: enable percpu vector domain