ACPI suspend: Call _PTS before suspending devices

[linux-2.6-omap-h63xx.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b3f20beea41116446bb4cecaf9a16c3b3698031c..cf3868956f1e852850fa7ac3a680f0b4b6e25ee6 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -168,6 +168,11 @@ and is between 256 and 4096 characters. It is defined in the file
        acpi_irq_isa=   [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
                        Format: <irq>,<irq>...
 
+       acpi_new_pts_ordering [HW,ACPI]
+                       Enforce the ACPI 2.0 ordering of the _PTS control
+                       method wrt putting devices into low power states
+                       default: pre ACPI 2.0 ordering of _PTS
+
        acpi_no_auto_ssdt       [HW,ACPI] Disable automatic loading of SSDT
 
        acpi_os_name=   [HW,ACPI] Tell ACPI BIOS the name of the OS
@@ -416,8 +421,21 @@ and is between 256 and 4096 characters. It is defined in the file
                        [SPARC64] tick
                        [X86-64] hpet,tsc
 
-       code_bytes      [IA32] How many bytes of object code to print in an
-                       oops report.
+       clearcpuid=BITNUM [X86]
+                       Disable CPUID feature X for the kernel. See
+                       include/asm-x86/cpufeature.h for the valid bit numbers.
+                       Note the Linux specific bits are not necessarily
+                       stable over kernel options, but the vendor specific
+                       ones should be.
+                       Also note that user programs calling CPUID directly
+                       or using the feature without checking anything
+                       will still see it. This just prevents it from
+                       being used by the kernel or shown in /proc/cpuinfo.
+                       Also note the kernel might malfunction if you disable
+                       some critical bits.
+
+       code_bytes      [IA32/X86_64] How many bytes of object code to print
+                       in an oops report.
                        Range: 0 - 8192
                        Default: 64
 
@@ -570,6 +588,12 @@ and is between 256 and 4096 characters. It is defined in the file
                        See drivers/char/README.epca and
                        Documentation/digiepca.txt.
 
+       disable_mtrr_trim [X86, Intel and AMD only]
+                       By default the kernel will trim any uncacheable
+                       memory out of your available memory pool based on
+                       MTRR settings.  This parameter disables that behavior,
+                       possibly causing your machine to run very slowly.
+
        dmasound=       [HW,OSS] Sound subsystem buffers
 
        dscc4.setup=    [NET]
@@ -660,6 +684,10 @@ and is between 256 and 4096 characters. It is defined in the file
 
        gamma=          [HW,DRM]
 
+       gart_fix_e820=  [X86_64] disable the fix e820 for K8 GART
+                       Format: off | on
+                       default: on
+
        gdth=           [HW,SCSI]
                        See header of drivers/scsi/gdth.c.
 
@@ -694,6 +722,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        See Documentation/isdn/README.HiSax.
 
        hugepages=      [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
+       hugepagesz=     [HW,IA-64,PPC] The size of the HugeTLB pages.
 
        i8042.direct    [HW] Put keyboard port into non-translated mode
        i8042.dumbkbd   [HW] Pretend that controller can only read data from
@@ -1069,6 +1098,11 @@ and is between 256 and 4096 characters. It is defined in the file
                        Multi-Function General Purpose Timers on AMD Geode
                        platforms.
 
+       mfgptfix        [X86-32] Fix MFGPT timers on AMD Geode platforms when
+                       the BIOS has incorrectly applied a workaround. TinyBIOS
+                       version 0.98 is known to be affected, 0.99 fixes the
+                       problem by letting the user disable the workaround.
+
        mga=            [HW,DRM]
 
        mousedev.tap_time=
@@ -1169,6 +1203,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
        nodisconnect    [HW,SCSI,M68K] Disables SCSI disconnects.
 
+       noefi           [X86-32,X86-64] Disable EFI runtime services support.
+
        noexec          [IA-64]
 
        noexec          [X86-32,X86-64]
@@ -1179,6 +1215,8 @@ and is between 256 and 4096 characters. It is defined in the file
                        register save and restore. The kernel will only save
                        legacy floating-point registers on task switch.
 
+       noclflush       [BUGS=X86] Don't use the CLFLUSH instruction
+
        nohlt           [BUGS=ARM]
 
        no-hlt          [BUGS=X86-32] Tells the kernel that the hlt