X86-32 X86-32, aka i386 architecture is enabled.
X86-64 X86-64 architecture is enabled.
More X86-64 boot options can be found in
- Documentation/x86_64/boot-options.txt .
+ Documentation/x86/x86_64/boot-options.txt .
X86 Either 32bit or 64bit x86 (same as X86-32+X86-64)
In addition, the following text indicates that the option:
Parameters denoted with BOOT are actually interpreted by the boot
loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/i386/boot.txt>.
+need or coordination with <Documentation/x86/i386/boot.txt>.
There are also arch-specific kernel-parameters not documented here.
-See for example <Documentation/x86_64/boot-options.txt>.
+See for example <Documentation/x86/x86_64/boot-options.txt>.
Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
a trailing = on the name of any parameter states that that parameter will
acpi.debug_level= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an ACPI debug level,
- 1: enable, 0: disable. It is useful for boot time
- debugging. After system has booted up, it can be set
- via /sys/module/acpi/parameters/debug_level.
- CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
- Available bits (add the numbers together) to enable different
- debug output levels of the ACPI subsystem:
- 0x01 error 0x02 warn 0x04 init 0x08 debug object
- 0x10 info 0x20 init names 0x40 parse 0x80 load
- 0x100 dispatch 0x200 execute 0x400 names 0x800 operation region
- 0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects
- 0x10000 resources 0x20000 user requests 0x40000 package.
- The number can be in decimal or prefixed with 0x in hex.
- Warning: Many of these options can produce a lot of
- output and make your system unusable. Be very careful.
+ which corresponds to the level in an ACPI_DEBUG_PRINT
+ statement. After system has booted up, this mask
+ can be set via /sys/module/acpi/parameters/debug_level.
+
+ CONFIG_ACPI_DEBUG must be enabled for this to produce
+ any output. The number can be in decimal or prefixed
+ with 0x in hex. Some of these options produce so much
+ output that the system is unusable.
+
+ The following global components are defined by the
+ ACPI CA:
+ 0x01 error
+ 0x02 warn
+ 0x04 init
+ 0x08 debug object
+ 0x10 info
+ 0x20 init names
+ 0x40 parse
+ 0x80 load
+ 0x100 dispatch
+ 0x200 execute
+ 0x400 names
+ 0x800 operation region
+ 0x1000 bfield
+ 0x2000 tables
+ 0x4000 values
+ 0x8000 objects
+ 0x10000 resources
+ 0x20000 user requests
+ 0x40000 package
+ The number can be in decimal or prefixed with 0x in hex.
+ Warning: Many of these options can produce a lot of
+ output and make your system unusable. Be very careful.
+
+ acpi.power_nocheck= [HW,ACPI]
+ Format: 1/0 enable/disable the check of power state.
+ On some bogus BIOS the _PSC object/_STA object of
+ power resource can't return the correct device power
+ state. In such case it is unneccessary to check its
+ power state again in power transition.
+ 1 : disable the power state check
acpi_pm_good [X86-32,X86-64]
Override the pmtimer bug detection: force the kernel
Format:
<cpu number>,...,<cpu number>
or
- <cpu number>-<cpu number> (must be a positive range in ascending order)
+ <cpu number>-<cpu number>
+ (must be a positive range in ascending order)
or a mixture
<cpu number>,...,<cpu number>-<cpu number>
+
This option can be used to specify one or more CPUs
to isolate from the general SMP balancing and scheduling
- algorithms. The only way to move a process onto or off
- an "isolated" CPU is via the CPU affinity syscalls.
+ algorithms. You can move a process onto or off an
+ "isolated" CPU via the CPU affinity syscalls or cpuset.
<cpu number> begins at 0 and the maximum value is
"number of CPUs in system - 1".
mce [X86-32] Machine Check Exception
- mce=option [X86-64] See Documentation/x86_64/boot-options.txt
+ mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt
md= [HW] RAID subsystems devices and level
See Documentation/md.txt.
Valid arguments: on, off
Default: on
- noirqbalance [X86-32,SMP,KNL] Disable kernel irq balancing
-
noirqdebug [X86-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
See Documentation/paride.txt.
pirq= [SMP,APIC] Manual mp-table setup
- See Documentation/i386/IO-APIC.txt.
+ See Documentation/x86/i386/IO-APIC.txt.
plip= [PPT,NET] Parallel port network link
Format: { parport<nr> | timid | 0 }
Override pmtimer IOPort with a hex value.
e.g. pmtmr=0x508
+ pnp.debug [PNP]
+ Enable PNP debug messages. This depends on the
+ CONFIG_PNP_DEBUG_MESSAGES option.
+
pnpacpi= [ACPI]
{ off }
thermal.crt= [HW,ACPI]
-1: disable all critical trip points in all thermal zones
- <degrees C>: lower all critical trip points
+ <degrees C>: override all critical trip points
thermal.nocrt= [HW,ACPI]
Set to disable actions on ACPI thermal zone
See Documentation/fb/modedb.txt.
vga= [BOOT,X86-32] Select a particular video mode
- See Documentation/i386/boot.txt and
+ See Documentation/x86/i386/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is