ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ KMEMTRACE kmemtrace is enabled.
LIBATA Libata driver is enabled
LP Printer support is enabled.
LOOP Loopback device support is enabled.
Range: 0 - 8192
Default: 64
+ dma_debug=off If the kernel is compiled with DMA_API_DEBUG support
+ this option disables the debugging code at boot.
+
+ dma_debug_entries=<number>
+ This option allows to tune the number of preallocated
+ entries for DMA-API debugging code. One entry is
+ required per DMA-API allocation. Use this if the
+ DMA-API debugging code disables itself because the
+ architectural default is too low.
+
hpet= [X86-32,HPET] option to control HPET usage
Format: { enable (default) | disable | force |
verbose }
debug_objects [KNL] Enable object debugging
+ no_debug_objects
+ [KNL] Disable object debugging
+
debugpat [X86] Enable PAT debugging
decnet.addr= [HW,NET]
If specified, z/VM IUCV HVC accepts connections
from listed z/VM user IDs only.
+ i2c_bus= [HW] Override the default board specific I2C bus speed
+ or register an additional I2C bus that is not
+ registered from board initialization code.
+ Format:
+ <bus_id>,<clkrate>
+
i8042.debug [HW] Toggle i8042 debug mode
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
use the HighMem zone if it exists, and the Normal
zone if it does not.
+ kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no }
+ Controls whether kmemtrace is enabled
+ at boot-time.
+
+ kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of
+ subbufs kmemtrace's relay channel has. Set this
+ higher than default (KMEMTRACE_N_SUBBUFS in code) if
+ you experience buffer overruns.
+
movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
is similar to kernelcore except it specifies the
amount of memory used for migratable allocations.
noclflush [BUGS=X86] Don't use the CLFLUSH instruction
- nohlt [BUGS=ARM,SH]
+ nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
+ wfi(ARM) instruction doesn't work correctly and not to
+ use it. This is also useful when using JTAG debugger.
no-hlt [BUGS=X86-32] Tells the kernel that the hlt
instruction doesn't work correctly and not to
Valid arguments: on, off
Default: on
+ noiotrap [SH] Disables trapped I/O port accesses.
+
noirqdebug [X86-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
nosoftlockup [KNL] Disable the soft-lockup detector.
noswapaccount [KNL] Disable accounting of swap in memory resource
- controller. (See Documentation/controllers/memory.txt)
+ controller. (See Documentation/cgroups/memory.txt)
nosync [HW,M68K] Disables sync negotiation for all devices.
See also Documentation/blockdev/paride.txt.
pci=option[,option...] [PCI] various PCI subsystem options:
+ earlydump [X86] dump PCI config space before the kernel
+ changes anything
off [X86] don't probe for the PCI bus
bios [X86-32] force use of PCI BIOS, don't access
the hardware directly. Use this if your machine
cbmemsize=nn[KMG] The fixed amount of bus space which is
reserved for the CardBus bridge's memory
window. The default value is 64 megabytes.
+ resource_alignment=
+ Format:
+ [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+ Specifies alignment and device to reassign
+ aligned memory resources.
+ If <order of align> is not specified,
+ PAGE_SIZE is used as alignment.
+ PCI-PCI bridge can be specified, if resource
+ windows need to be expanded.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
relax_domain_level=
[KNL, SMP] Set scheduler's default relax_domain_level.
- See Documentation/cpusets.txt.
+ See Documentation/cgroups/cpusets.txt.
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
If enabled at boot time, /selinux/disable can be used
later to disable prior to initial policy load.
- selinux_compat_net =
- [SELINUX] Set initial selinux_compat_net flag value.
- Format: { "0" | "1" }
- 0 -- use new secmark-based packet controls
- 1 -- use legacy packet controls
- Default value is 0 (preferred).
- Value can be changed at runtime via
- /selinux/compat_net.
-
serialnumber [BUGS=X86-32]
shapers= [NET]
tp720= [HW,PS2]
+ trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format:
<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
projects / linux-2.6-omap-h63xx.git / blobdiff