const char *dev_name: the device name we are mounting.
void *data: arbitrary mount options, usually comes as an ASCII
- string
+ string (see "Mount Options" section)
struct vfsmount *mnt: a vfs-internal representation of a mount point
must initialize this properly.
void *data: arbitrary mount options, usually comes as an ASCII
- string
+ string (see "Mount Options" section)
int silent: whether or not to be silent on error
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
- void (*read_inode) (struct inode *);
-
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*put_inode) (struct inode *);
void (*drop_inode) (struct inode *);
void (*delete_inode) (struct inode *);
void (*put_super) (struct super_block *);
->alloc_inode was defined and simply undoes anything done by
->alloc_inode.
- read_inode: this method is called to read a specific inode from the
- mounted filesystem. The i_ino member in the struct inode is
- initialized by the VFS to indicate which inode to read. Other
- members are filled in by this method.
-
- You can set this to NULL and use iget5_locked() instead of iget()
- to read inodes. This is necessary for filesystems for which the
- inode number is not sufficient to identify an inode.
-
dirty_inode: this method is called by the VFS to mark an inode dirty.
write_inode: this method is called when the VFS needs to write an
inode to disc. The second parameter indicates whether the write
should be synchronous or not, not all filesystems check this flag.
- put_inode: called when the VFS inode is removed from the inode
- cache.
-
drop_inode: called when the last access to the inode is dropped,
with the inode_lock spinlock held.
umount_begin: called when the VFS is unmounting a filesystem.
- show_options: called by the VFS to show mount options for /proc/<pid>/mounts.
+ show_options: called by the VFS to show mount options for
+ /proc/<pid>/mounts. (see "Mount Options" section)
quota_read: called by the VFS to read from filesystem quota file.
quota_write: called by the VFS to write to filesystem quota file.
-The read_inode() method is responsible for filling in the "i_op"
-field. This is a pointer to a "struct inode_operations" which
-describes the methods that can be performed on individual inodes.
+Whoever sets up the inode is responsible for filling in the "i_op" field. This
+is a pointer to a "struct inode_operations" which describes the methods that
+can be performed on individual inodes.
The Inode Object
struct list_head *pages, unsigned nr_pages);
int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
+ int (*write_begin)(struct file *, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned flags,
+ struct page **pagep, void **fsdata);
+ int (*write_end)(struct file *, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata);
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
any basic-blocks on storage, then those blocks should be
pre-read (if they haven't been read already) so that the
updated blocks can be written out properly.
- The page will be locked. If prepare_write wants to unlock the
- page it, like readpage, may do so and return
- AOP_TRUNCATED_PAGE.
- In this case the prepare_write will be retried one the lock is
- regained.
+ The page will be locked.
Note: the page _must not_ be marked uptodate in this function
(or anywhere else) unless it actually is uptodate right now. As
operations. It should avoid returning an error if possible -
errors should have been handled by prepare_write.
+ write_begin: This is intended as a replacement for prepare_write. The
+ key differences being that:
+ - it returns a locked page (in *pagep) rather than being
+ given a pre locked page;
+ - it must be able to cope with short writes (where the
+ length passed to write_begin is greater than the number
+ of bytes copied into the page).
+
+ Called by the generic buffered write code to ask the filesystem to
+ prepare to write len bytes at the given offset in the file. The
+ address_space should check that the write will be able to complete,
+ by allocating space if necessary and doing any other internal
+ housekeeping. If the write will update parts of any basic-blocks on
+ storage, then those blocks should be pre-read (if they haven't been
+ read already) so that the updated blocks can be written out properly.
+
+ The filesystem must return the locked pagecache page for the specified
+ offset, in *pagep, for the caller to write into.
+
+ flags is a field for AOP_FLAG_xxx flags, described in
+ include/linux/fs.h.
+
+ A void * may be returned in fsdata, which then gets passed into
+ write_end.
+
+ Returns 0 on success; < 0 on failure (which is the error code), in
+ which case write_end is not called.
+
+ write_end: After a successful write_begin, and data copy, write_end must
+ be called. len is the original len passed to write_begin, and copied
+ is the amount that was able to be copied (copied == len is always true
+ if write_begin was called with the AOP_FLAG_UNINTERRUPTIBLE flag).
+
+ The filesystem must take care of unlocking the page and releasing it
+ refcount, and updating i_size.
+
+ Returns < 0 on failure, otherwise the number of bytes (<= 'copied')
+ that were able to be copied into pagecache.
+
bmap: called by the VFS to map a logical block offset within object to
physical block number. This method is used by the FIBMAP
ioctl and for working with swap-files. To be able to swap to
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.
- The second case if when a request has been made to invalidate
+ The second case is when a request has been made to invalidate
some or all pages in an address_space. This can happen
through the fadvice(POSIX_FADV_DONTNEED) system call or by the
filesystem explicitly requesting it as nfs and 9fs do (when
For further information on dentry locking, please refer to the document
Documentation/filesystems/dentry-locking.txt.
+Mount Options
+=============
+
+Parsing options
+---------------
+
+On mount and remount the filesystem is passed a string containing a
+comma separated list of mount options. The options can have either of
+these forms:
+
+ option
+ option=value
+
+The <linux/parser.h> header defines an API that helps parse these
+options. There are plenty of examples on how to use it in existing
+filesystems.
+
+Showing options
+---------------
+
+If a filesystem accepts mount options, it must define show_options()
+to show all the currently active options. The rules are:
+
+ - options MUST be shown which are not default or their values differ
+ from the default
+
+ - options MAY be shown which are enabled by default or have their
+ default value
+
+Options used only internally between a mount helper and the kernel
+(such as file descriptors), or which only have an effect during the
+mounting (such as ones controlling the creation of a journal) are exempt
+from the above rules.
+
+The underlying reason for the above rules is to make sure, that a
+mount can be accurately replicated (e.g. umounting and mounting again)
+based on the information found in /proc/mounts.
+
+A simple method of saving options at mount/remount time and showing
+them is provided with the save_mount_options() and
+generic_show_options() helper functions. Please note, that using
+these may have drawbacks. For more info see header comments for these
+functions in fs/namespace.c.
Resources
=========