fbdev: add new framebuffer driver for Fujitsu MB862xx GDCs

[linux-2.6-omap-h63xx.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index f79c2040758b4ab43d867acaa451c1d2b3891934..3f3ce13fef431450909e12cb91646534c68cf46f 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -76,6 +76,14 @@ config FB_DDC
        select I2C
        default n
 
        select I2C
        default n
 

+config FB_BOOT_VESA_SUPPORT
+       bool
+       depends on FB
+       default n
+       ---help---
+         If true, at least one selected framebuffer driver can take advantage
+         of VESA video modes set at an early boot stage via the vga= parameter.
+

 config FB_CFB_FILLRECT
        tristate
        depends on FB
 config FB_CFB_FILLRECT
        tristate
        depends on FB


@@ -254,16 +262,24 @@ config FB_PM2
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        help
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        help

-         This is the frame buffer device driver for the Permedia2 AGP frame
-         buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
-         product page at
-         <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+         This is the frame buffer device driver for cards based on
+         the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+         The driver was tested on the following cards:
+               Diamond FireGL 1000 PRO AGP
+               ELSA Gloria Synergy PCI
+               Appian Jeronimo PRO (both heads) PCI
+               3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+               Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+               ASK Graphic Blaster Exxtreme AGP
+
+         To compile this driver as a module, choose M here: the
+         module will be called pm2fb.

 
 config FB_PM2_FIFO_DISCONNECT
        bool "enable FIFO disconnect feature"
        depends on FB_PM2 && PCI
        help
 
 config FB_PM2_FIFO_DISCONNECT
        bool "enable FIFO disconnect feature"
        depends on FB_PM2 && PCI
        help

-         Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+         Support the Permedia2 FIFO disconnect feature.

 
 config FB_ARMCLCD
        tristate "ARM PrimeCell PL110 support"
 
 config FB_ARMCLCD
        tristate "ARM PrimeCell PL110 support"


@@ -673,6 +689,7 @@ config FB_VESA
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT

+       select FB_BOOT_VESA_SUPPORT

        help
          This is the frame buffer device driver for generic VESA 2.0
          compliant graphic cards. The older VESA 1.2 cards are not supported.
        help
          This is the frame buffer device driver for generic VESA 2.0
          compliant graphic cards. The older VESA 1.2 cards are not supported.


@@ -681,23 +698,14 @@ config FB_VESA
 
 config FB_EFI
        bool "EFI-based Framebuffer Support"
 
 config FB_EFI
        bool "EFI-based Framebuffer Support"

-       depends on (FB = y) && X86
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       help
-         This is the EFI frame buffer device driver. If the firmware on
-         your platform is UEFI2.0, select Y to add support for
-         Graphics Output Protocol for early console messages to appear.
-
-config FB_IMAC
-       bool "Intel-based Macintosh Framebuffer Support"

        depends on (FB = y) && X86 && EFI
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        help
        depends on (FB = y) && X86 && EFI
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        help

-         This is the frame buffer device driver for the Intel-based Macintosh
+         This is the EFI frame buffer device driver. If the firmware on
+         your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+         using the EFI framebuffer as your console.

 
 config FB_N411
        tristate "N411 Apollo/Hecuba devkit support"
 
 config FB_N411
        tristate "N411 Apollo/Hecuba devkit support"


@@ -1118,6 +1126,7 @@ config FB_INTEL
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT

+       select FB_BOOT_VESA_SUPPORT

        help
          This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
        help
          This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.


@@ -1470,6 +1479,7 @@ config FB_SIS
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT

+       select FB_BOOT_VESA_SUPPORT

        help
          This is the frame buffer device driver for the SiS 300, 315, 330
          and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
        help
          This is the frame buffer device driver for the SiS 300, 315, 330
          and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.


@@ -1492,6 +1502,24 @@ config FB_SIS_315
          (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
          as XGI V3XT, V5, V8 and Z7.
 
          (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
          as XGI V3XT, V5, V8 and Z7.
 

+config FB_VIA
+       tristate "VIA UniChrome (Pro) and Chrome9 display support"
+       depends on FB && PCI
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select FB_SOFT_CURSOR
+       select I2C_ALGOBIT
+       select I2C
+       help
+         This is the frame buffer device driver for Graphics chips of VIA
+         UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+         CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+         /P4M900,VX800)
+         Say Y if you have a VIA UniChrome graphics board.
+
+         To compile this driver as a module, choose M here: the
+         module will be called viafb.

 config FB_NEOMAGIC
        tristate "NeoMagic display support"
        depends on FB && PCI
 config FB_NEOMAGIC
        tristate "NeoMagic display support"
        depends on FB && PCI


@@ -1521,25 +1549,25 @@ config FB_KYRO
          module will be called kyrofb.
 
 config FB_3DFX
          module will be called kyrofb.
 
 config FB_3DFX

-       tristate "3Dfx Banshee/Voodoo3 display support"
+       tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"

        depends on FB && PCI
        select FB_CFB_IMAGEBLIT
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        help
        depends on FB && PCI
        select FB_CFB_IMAGEBLIT
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        help

-         This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
-         chips. Say Y if you have such a graphics board.
+         This driver supports graphics boards with the 3Dfx Banshee,
+         Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+         such a graphics board.

 
          To compile this driver as a module, choose M here: the
          module will be called tdfxfb.
 
 config FB_3DFX_ACCEL
 
          To compile this driver as a module, choose M here: the
          module will be called tdfxfb.
 
 config FB_3DFX_ACCEL

-       bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+       bool "3Dfx Acceleration functions (EXPERIMENTAL)"

        depends on FB_3DFX && EXPERIMENTAL
        ---help---
        depends on FB_3DFX && EXPERIMENTAL
        ---help---

-       This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
-       with acceleration functions.
-
+       This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+       device driver with acceleration functions.

 
 config FB_VOODOO1
        tristate "3Dfx Voodoo Graphics (sst1) support"
 
 config FB_VOODOO1
        tristate "3Dfx Voodoo Graphics (sst1) support"


@@ -1604,17 +1632,16 @@ config FB_TRIDENT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        ---help---
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        ---help---

-         This driver is supposed to support graphics boards with the
-         Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
+         This is the frame buffer device driver for Trident PCI/AGP chipsets.
+         Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+         and Blade XP.
+         There are also integrated versions of these chips called CyberXXXX,
+         CyberImage or CyberBlade. These chips are mostly found in laptops

          but also on some motherboards. For more information, read
          <file:Documentation/fb/tridentfb.txt>
 
          but also on some motherboards. For more information, read
          <file:Documentation/fb/tridentfb.txt>
 

-         Cyberblade/i1 support will be removed soon, use the cyblafb driver
-         instead.
-

          Say Y if you have such a graphics board.
 
          Say Y if you have such a graphics board.
 

-

          To compile this driver as a module, choose M here: the
          module will be called tridentfb.
 
          To compile this driver as a module, choose M here: the
          module will be called tridentfb.
 


@@ -1869,6 +1896,28 @@ config FB_SH_MOBILE_LCDC
        ---help---
          Frame buffer driver for the on-chip SH-Mobile LCD controller.
 
        ---help---
          Frame buffer driver for the on-chip SH-Mobile LCD controller.
 

+config FB_TMIO
+       tristate "Toshiba Mobile IO FrameBuffer support"
+       depends on FB && MFD_CORE
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       ---help---
+         Frame buffer driver for the Toshiba Mobile IO integrated as found
+         on the Sharp SL-6000 series
+
+         This driver is also available as a module ( = code which can be
+         inserted and removed from the running kernel whenever you want). The
+         module will be called tmiofb. If you want to compile it as a module,
+         say M here and read <file:Documentation/kbuild/modules.txt>.
+
+         If unsure, say N.
+
+config FB_TMIO_ACCELL
+       bool "tmiofb acceleration"
+       depends on FB_TMIO
+       default y
+

 config FB_S3C2410
        tristate "S3C2410 LCD framebuffer support"
        depends on FB && ARCH_S3C2410
 config FB_S3C2410
        tristate "S3C2410 LCD framebuffer support"
        depends on FB && ARCH_S3C2410


@@ -2034,6 +2083,38 @@ config FB_METRONOME
          controller. The pre-release name for this device was 8track
          and could also have been called by some vendors as PVI-nnnn.
 
          controller. The pre-release name for this device was 8track
          and could also have been called by some vendors as PVI-nnnn.
 

+config FB_MB862XX
+       tristate "Fujitsu MB862xx GDC support"
+       depends on FB
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       ---help---
+         Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+config FB_MB862XX_PCI_GDC
+       bool "Carmine/Coral-P(A) GDC"
+       depends on PCI && FB_MB862XX
+       ---help---
+         This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+         PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+       bool "Lime GDC"
+       depends on FB_MB862XX
+       depends on OF && !FB_MB862XX_PCI_GDC
+       select FB_FOREIGN_ENDIAN
+       select FB_LITTLE_ENDIAN
+       ---help---
+         Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+config FB_PRE_INIT_FB
+       bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+       depends on FB_MB862XX_LIME
+       ---help---
+         Select this option if display contents should be inherited as set by
+         the bootloader.
+

 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"