/* * Intel CPU Microcode Update Driver for Linux * * Copyright (C) 2000-2006 Tigran Aivazian * 2006 Shaohua Li * * This driver allows to upgrade microcode on Intel processors * belonging to IA-32 family - PentiumPro, Pentium II, * Pentium III, Xeon, Pentium 4, etc. * * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture * Software Developer's Manual * Order Number 253668 or free download from: * * http://developer.intel.com/design/pentium4/manuals/253668.htm * * For more information, go to http://www.urbanmyth.org/microcode * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * 1.0 16 Feb 2000, Tigran Aivazian * Initial release. * 1.01 18 Feb 2000, Tigran Aivazian * Added read() support + cleanups. * 1.02 21 Feb 2000, Tigran Aivazian * Added 'device trimming' support. open(O_WRONLY) zeroes * and frees the saved copy of applied microcode. * 1.03 29 Feb 2000, Tigran Aivazian * Made to use devfs (/dev/cpu/microcode) + cleanups. * 1.04 06 Jun 2000, Simon Trimmer * Added misc device support (now uses both devfs and misc). * Added MICROCODE_IOCFREE ioctl to clear memory. * 1.05 09 Jun 2000, Simon Trimmer * Messages for error cases (non Intel & no suitable microcode). * 1.06 03 Aug 2000, Tigran Aivazian * Removed ->release(). Removed exclusive open and status bitmap. * Added microcode_rwsem to serialize read()/write()/ioctl(). * Removed global kernel lock usage. * 1.07 07 Sep 2000, Tigran Aivazian * Write 0 to 0x8B msr and then cpuid before reading revision, * so that it works even if there were no update done by the * BIOS. Otherwise, reading from 0x8B gives junk (which happened * to be 0 on my machine which is why it worked even when I * disabled update by the BIOS) * Thanks to Eric W. Biederman for the fix. * 1.08 11 Dec 2000, Richard Schaal and * Tigran Aivazian * Intel Pentium 4 processor support and bugfixes. * 1.09 30 Oct 2001, Tigran Aivazian * Bugfix for HT (Hyper-Threading) enabled processors * whereby processor resources are shared by all logical processors * in a single CPU package. * 1.10 28 Feb 2002 Asit K Mallick and * Tigran Aivazian , * Serialize updates as required on HT processors due to * speculative nature of implementation. * 1.11 22 Mar 2002 Tigran Aivazian * Fix the panic when writing zero-length microcode chunk. * 1.12 29 Sep 2003 Nitin Kamble , * Jun Nakajima * Support for the microcode updates in the new format. * 1.13 10 Oct 2003 Tigran Aivazian * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl * because we no longer hold a copy of applied microcode * in kernel memory. * 1.14 25 Jun 2004 Tigran Aivazian * Fix sigmatch() macro to handle old CPUs with pf == 0. * Thanks to Stuart Swales for pointing out this bug. */ /* #define DEBUG */ /* pr_debug */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include MODULE_DESCRIPTION("Microcode Update Driver"); MODULE_AUTHOR("Tigran Aivazian "); MODULE_LICENSE("GPL"); #define DEFAULT_UCODE_DATASIZE (2000) #define MC_HEADER_SIZE (sizeof(struct microcode_header_intel)) #define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) #define EXT_HEADER_SIZE (sizeof(struct extended_sigtable)) #define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature)) #define DWSIZE (sizeof(u32)) #define get_totalsize(mc) \ (((struct microcode_intel *)mc)->hdr.totalsize ? \ ((struct microcode_intel *)mc)->hdr.totalsize : \ DEFAULT_UCODE_TOTALSIZE) #define get_datasize(mc) \ (((struct microcode_intel *)mc)->hdr.datasize ? \ ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) #define sigmatch(s1, s2, p1, p2) \ (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) /* serialize access to the physical write to MSR 0x79 */ static DEFINE_SPINLOCK(microcode_update_lock); static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu_num); unsigned int val[2]; memset(csig, 0, sizeof(*csig)); if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || cpu_has(c, X86_FEATURE_IA64)) { printk(KERN_ERR "microcode: CPU%d not a capable Intel " "processor\n", cpu_num); return -1; } csig->sig = cpuid_eax(0x00000001); if ((c->x86_model >= 5) || (c->x86 > 6)) { /* get processor flags from MSR 0x17 */ rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); csig->pf = 1 << ((val[1] >> 18) & 7); } wrmsr(MSR_IA32_UCODE_REV, 0, 0); /* see notes above for revision 1.07. Apparent chip bug */ sync_core(); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", csig->sig, csig->pf, csig->rev); return 0; } static inline int microcode_update_match(int cpu_num, struct microcode_header_intel *mc_header, int sig, int pf) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (!sigmatch(sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) || mc_header->rev <= uci->cpu_sig.rev) return 0; return 1; } static int microcode_sanity_check(void *mc) { struct microcode_header_intel *mc_header = mc; struct extended_sigtable *ext_header = NULL; struct extended_signature *ext_sig; unsigned long total_size, data_size, ext_table_size; int sum, orig_sum, ext_sigcount = 0, i; total_size = get_totalsize(mc_header); data_size = get_datasize(mc_header); if (data_size + MC_HEADER_SIZE > total_size) { printk(KERN_ERR "microcode: error! " "Bad data size in microcode data file\n"); return -EINVAL; } if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { printk(KERN_ERR "microcode: error! " "Unknown microcode update format\n"); return -EINVAL; } ext_table_size = total_size - (MC_HEADER_SIZE + data_size); if (ext_table_size) { if ((ext_table_size < EXT_HEADER_SIZE) || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { printk(KERN_ERR "microcode: error! " "Small exttable size in microcode data file\n"); return -EINVAL; } ext_header = mc + MC_HEADER_SIZE + data_size; if (ext_table_size != exttable_size(ext_header)) { printk(KERN_ERR "microcode: error! " "Bad exttable size in microcode data file\n"); return -EFAULT; } ext_sigcount = ext_header->count; } /* check extended table checksum */ if (ext_table_size) { int ext_table_sum = 0; int *ext_tablep = (int *)ext_header; i = ext_table_size / DWSIZE; while (i--) ext_table_sum += ext_tablep[i]; if (ext_table_sum) { printk(KERN_WARNING "microcode: aborting, " "bad extended signature table checksum\n"); return -EINVAL; } } /* calculate the checksum */ orig_sum = 0; i = (MC_HEADER_SIZE + data_size) / DWSIZE; while (i--) orig_sum += ((int *)mc)[i]; if (orig_sum) { printk(KERN_ERR "microcode: aborting, bad checksum\n"); return -EINVAL; } if (!ext_table_size) return 0; /* check extended signature checksum */ for (i = 0; i < ext_sigcount; i++) { ext_sig = (void *)ext_header + EXT_HEADER_SIZE + EXT_SIGNATURE_SIZE * i; sum = orig_sum - (mc_header->sig + mc_header->pf + mc_header->cksum) + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); if (sum) { printk(KERN_ERR "microcode: aborting, bad checksum\n"); return -EINVAL; } } return 0; } /* * return 0 - no update found * return 1 - found update * return < 0 - error */ static int get_matching_microcode(void *mc, int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; struct microcode_header_intel *mc_header = mc; struct extended_sigtable *ext_header; unsigned long total_size = get_totalsize(mc_header); int ext_sigcount, i; struct extended_signature *ext_sig; void *new_mc; if (microcode_update_match(cpu, mc_header, mc_header->sig, mc_header->pf)) goto find; if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) return 0; ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE; ext_sigcount = ext_header->count; ext_sig = (void *)ext_header + EXT_HEADER_SIZE; for (i = 0; i < ext_sigcount; i++) { if (microcode_update_match(cpu, mc_header, ext_sig->sig, ext_sig->pf)) goto find; ext_sig++; } return 0; find: pr_debug("microcode: CPU%d found a matching microcode update with" " version 0x%x (current=0x%x)\n", cpu, mc_header->rev, uci->cpu_sig.rev); new_mc = vmalloc(total_size); if (!new_mc) { printk(KERN_ERR "microcode: error! Can not allocate memory\n"); return -ENOMEM; } /* free previous update file */ vfree(uci->mc.mc_intel); memcpy(new_mc, mc, total_size); uci->mc.mc_intel = new_mc; return 1; } static void apply_microcode(int cpu) { unsigned long flags; unsigned int val[2]; int cpu_num = raw_smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; /* We should bind the task to the CPU */ BUG_ON(cpu_num != cpu); if (uci->mc.mc_intel == NULL) return; /* serialize access to the physical write to MSR 0x79 */ spin_lock_irqsave(µcode_update_lock, flags); /* write microcode via MSR 0x79 */ wrmsr(MSR_IA32_UCODE_WRITE, (unsigned long) uci->mc.mc_intel->bits, (unsigned long) uci->mc.mc_intel->bits >> 16 >> 16); wrmsr(MSR_IA32_UCODE_REV, 0, 0); /* see notes above for revision 1.07. Apparent chip bug */ sync_core(); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); spin_unlock_irqrestore(µcode_update_lock, flags); if (val[1] != uci->mc.mc_intel->hdr.rev) { printk(KERN_ERR "microcode: CPU%d update from revision " "0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]); return; } printk(KERN_INFO "microcode: CPU%d updated from revision " "0x%x to 0x%x, date = %04x-%02x-%02x \n", cpu_num, uci->cpu_sig.rev, val[1], uci->mc.mc_intel->hdr.date & 0xffff, uci->mc.mc_intel->hdr.date >> 24, (uci->mc.mc_intel->hdr.date >> 16) & 0xff); uci->cpu_sig.rev = val[1]; } #ifdef CONFIG_MICROCODE_OLD_INTERFACE extern void __user *user_buffer; /* user area microcode data buffer */ extern unsigned int user_buffer_size; /* it's size */ static long get_next_ucode(void **mc, long offset) { struct microcode_header_intel mc_header; unsigned long total_size; /* No more data */ if (offset >= user_buffer_size) return 0; if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) { printk(KERN_ERR "microcode: error! Can not read user data\n"); return -EFAULT; } total_size = get_totalsize(&mc_header); if (offset + total_size > user_buffer_size) { printk(KERN_ERR "microcode: error! Bad total size in microcode " "data file\n"); return -EINVAL; } *mc = vmalloc(total_size); if (!*mc) return -ENOMEM; if (copy_from_user(*mc, user_buffer + offset, total_size)) { printk(KERN_ERR "microcode: error! Can not read user data\n"); vfree(*mc); return -EFAULT; } return offset + total_size; } #endif static long get_next_ucode_from_buffer(void **mc, const u8 *buf, unsigned long size, long offset) { struct microcode_header_intel *mc_header; unsigned long total_size; /* No more data */ if (offset >= size) return 0; mc_header = (struct microcode_header_intel *)(buf + offset); total_size = get_totalsize(mc_header); if (offset + total_size > size) { printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); return -EINVAL; } *mc = vmalloc(total_size); if (!*mc) { printk(KERN_ERR "microcode: error! Can not allocate memory\n"); return -ENOMEM; } memcpy(*mc, buf + offset, total_size); return offset + total_size; } /* fake device for request_firmware */ extern struct platform_device *microcode_pdev; static int cpu_request_microcode(int cpu) { char name[30]; struct cpuinfo_x86 *c = &cpu_data(cpu); const struct firmware *firmware; const u8 *buf; unsigned long size; long offset = 0; int error; void *mc; /* We should bind the task to the CPU */ BUG_ON(cpu != raw_smp_processor_id()); sprintf(name, "intel-ucode/%02x-%02x-%02x", c->x86, c->x86_model, c->x86_mask); error = request_firmware(&firmware, name, µcode_pdev->dev); if (error) { pr_debug("microcode: data file %s load failed\n", name); return error; } buf = firmware->data; size = firmware->size; while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset)) > 0) { error = microcode_sanity_check(mc); if (error) break; error = get_matching_microcode(mc, cpu); if (error < 0) break; /* * It's possible the data file has multiple matching ucode, * lets keep searching till the latest version */ if (error == 1) { apply_microcode(cpu); error = 0; } vfree(mc); } if (offset > 0) vfree(mc); if (offset < 0) error = offset; release_firmware(firmware); return error; } static void microcode_fini_cpu(int cpu) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; vfree(uci->mc.mc_intel); uci->mc.mc_intel = NULL; } static struct microcode_ops microcode_intel_ops = { .get_next_ucode = get_next_ucode, .get_matching_microcode = get_matching_microcode, .microcode_sanity_check = microcode_sanity_check, .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode, .microcode_fini_cpu = microcode_fini_cpu, }; static int __init microcode_intel_module_init(void) { struct cpuinfo_x86 *c = &cpu_data(0); if (c->x86_vendor != X86_VENDOR_INTEL) { printk(KERN_ERR "microcode: CPU platform is not Intel-capable\n"); return -ENODEV; } return microcode_init(µcode_intel_ops, THIS_MODULE); } static void __exit microcode_intel_module_exit(void) { microcode_exit(); } module_init(microcode_intel_module_init) module_exit(microcode_intel_module_exit)