3 * pxa-ssp.c -- ALSA Soc Audio Layer
5 * Copyright 2005,2008 Wolfson Microelectronics PLC.
6 * Author: Liam Girdwood
7 * Mark Brown <broonie@opensource.wolfsonmicro.com>
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
15 * o Test network mode for > 16bit sample size
18 #include <linux/init.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
21 #include <linux/clk.h>
26 #include <sound/core.h>
27 #include <sound/pcm.h>
28 #include <sound/initval.h>
29 #include <sound/pcm_params.h>
30 #include <sound/soc.h>
31 #include <sound/pxa2xx-lib.h>
33 #include <mach/hardware.h>
34 #include <mach/pxa-regs.h>
35 #include <mach/regs-ssp.h>
36 #include <mach/audio.h>
39 #include "pxa2xx-pcm.h"
43 * SSP audio private data
50 struct ssp_state state;
54 #define PXA2xx_SSP1_BASE 0x41000000
55 #define PXA27x_SSP2_BASE 0x41700000
56 #define PXA27x_SSP3_BASE 0x41900000
57 #define PXA3xx_SSP4_BASE 0x41a00000
59 static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
60 .name = "SSP1 PCM Mono out",
61 .dev_addr = PXA2xx_SSP1_BASE + SSDR,
63 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
64 DCMD_BURST16 | DCMD_WIDTH2,
67 static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
68 .name = "SSP1 PCM Mono in",
69 .dev_addr = PXA2xx_SSP1_BASE + SSDR,
71 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
72 DCMD_BURST16 | DCMD_WIDTH2,
75 static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
76 .name = "SSP1 PCM Stereo out",
77 .dev_addr = PXA2xx_SSP1_BASE + SSDR,
79 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
80 DCMD_BURST16 | DCMD_WIDTH4,
83 static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
84 .name = "SSP1 PCM Stereo in",
85 .dev_addr = PXA2xx_SSP1_BASE + SSDR,
87 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
88 DCMD_BURST16 | DCMD_WIDTH4,
91 static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
92 .name = "SSP2 PCM Mono out",
93 .dev_addr = PXA27x_SSP2_BASE + SSDR,
95 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
96 DCMD_BURST16 | DCMD_WIDTH2,
99 static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
100 .name = "SSP2 PCM Mono in",
101 .dev_addr = PXA27x_SSP2_BASE + SSDR,
103 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
104 DCMD_BURST16 | DCMD_WIDTH2,
107 static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
108 .name = "SSP2 PCM Stereo out",
109 .dev_addr = PXA27x_SSP2_BASE + SSDR,
111 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
112 DCMD_BURST16 | DCMD_WIDTH4,
115 static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
116 .name = "SSP2 PCM Stereo in",
117 .dev_addr = PXA27x_SSP2_BASE + SSDR,
119 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
120 DCMD_BURST16 | DCMD_WIDTH4,
123 static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
124 .name = "SSP3 PCM Mono out",
125 .dev_addr = PXA27x_SSP3_BASE + SSDR,
127 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
128 DCMD_BURST16 | DCMD_WIDTH2,
131 static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
132 .name = "SSP3 PCM Mono in",
133 .dev_addr = PXA27x_SSP3_BASE + SSDR,
135 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
136 DCMD_BURST16 | DCMD_WIDTH2,
139 static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
140 .name = "SSP3 PCM Stereo out",
141 .dev_addr = PXA27x_SSP3_BASE + SSDR,
143 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
144 DCMD_BURST16 | DCMD_WIDTH4,
147 static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
148 .name = "SSP3 PCM Stereo in",
149 .dev_addr = PXA27x_SSP3_BASE + SSDR,
151 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
152 DCMD_BURST16 | DCMD_WIDTH4,
155 static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
156 .name = "SSP4 PCM Mono out",
157 .dev_addr = PXA3xx_SSP4_BASE + SSDR,
159 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
160 DCMD_BURST16 | DCMD_WIDTH2,
163 static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
164 .name = "SSP4 PCM Mono in",
165 .dev_addr = PXA3xx_SSP4_BASE + SSDR,
167 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
168 DCMD_BURST16 | DCMD_WIDTH2,
171 static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
172 .name = "SSP4 PCM Stereo out",
173 .dev_addr = PXA3xx_SSP4_BASE + SSDR,
175 .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
176 DCMD_BURST16 | DCMD_WIDTH4,
179 static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
180 .name = "SSP4 PCM Stereo in",
181 .dev_addr = PXA3xx_SSP4_BASE + SSDR,
183 .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
184 DCMD_BURST16 | DCMD_WIDTH4,
187 static void dump_registers(struct ssp_device *ssp)
189 dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
190 ssp_read_reg(ssp, SSCR0), ssp_read_reg(ssp, SSCR1),
191 ssp_read_reg(ssp, SSTO));
193 dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
194 ssp_read_reg(ssp, SSPSP), ssp_read_reg(ssp, SSSR),
195 ssp_read_reg(ssp, SSACD));
198 static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
200 &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
201 &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
204 &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
205 &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
208 &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
209 &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
212 &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
213 &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
217 static int pxa_ssp_startup(struct snd_pcm_substream *substream,
218 struct snd_soc_dai *dai)
220 struct snd_soc_pcm_runtime *rtd = substream->private_data;
221 struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
222 struct ssp_priv *priv = cpu_dai->private_data;
225 if (!cpu_dai->active) {
226 priv->dev.port = cpu_dai->id + 1;
227 priv->dev.irq = NO_IRQ;
228 clk_enable(priv->dev.ssp->clk);
229 ssp_disable(&priv->dev);
234 static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
235 struct snd_soc_dai *dai)
237 struct snd_soc_pcm_runtime *rtd = substream->private_data;
238 struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
239 struct ssp_priv *priv = cpu_dai->private_data;
241 if (!cpu_dai->active) {
242 ssp_disable(&priv->dev);
243 clk_disable(priv->dev.ssp->clk);
249 static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
251 struct ssp_priv *priv = cpu_dai->private_data;
253 if (!cpu_dai->active)
256 ssp_save_state(&priv->dev, &priv->state);
257 clk_disable(priv->dev.ssp->clk);
261 static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
263 struct ssp_priv *priv = cpu_dai->private_data;
265 if (!cpu_dai->active)
268 clk_enable(priv->dev.ssp->clk);
269 ssp_restore_state(&priv->dev, &priv->state);
270 ssp_enable(&priv->dev);
276 #define pxa_ssp_suspend NULL
277 #define pxa_ssp_resume NULL
281 * ssp_set_clkdiv - set SSP clock divider
282 * @div: serial clock rate divider
284 static void ssp_set_scr(struct ssp_dev *dev, u32 div)
286 struct ssp_device *ssp = dev->ssp;
287 u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
289 ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
293 * Set the SSP ports SYSCLK.
295 static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
296 int clk_id, unsigned int freq, int dir)
298 struct ssp_priv *priv = cpu_dai->private_data;
299 struct ssp_device *ssp = priv->dev.ssp;
302 u32 sscr0 = ssp_read_reg(ssp, SSCR0) &
303 ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
305 dev_dbg(&ssp->pdev->dev,
306 "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n",
307 cpu_dai->id, clk_id, freq);
310 case PXA_SSP_CLK_NET_PLL:
313 case PXA_SSP_CLK_PLL:
314 /* Internal PLL is fixed */
316 priv->sysclk = 1843200;
318 priv->sysclk = 13000000;
320 case PXA_SSP_CLK_EXT:
324 case PXA_SSP_CLK_NET:
326 sscr0 |= SSCR0_NCS | SSCR0_MOD;
328 case PXA_SSP_CLK_AUDIO:
330 ssp_set_scr(&priv->dev, 1);
337 /* The SSP clock must be disabled when changing SSP clock mode
338 * on PXA2xx. On PXA3xx it must be enabled when doing so. */
339 if (!cpu_is_pxa3xx())
340 clk_disable(priv->dev.ssp->clk);
341 val = ssp_read_reg(ssp, SSCR0) | sscr0;
342 ssp_write_reg(ssp, SSCR0, val);
343 if (!cpu_is_pxa3xx())
344 clk_enable(priv->dev.ssp->clk);
350 * Set the SSP clock dividers.
352 static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
355 struct ssp_priv *priv = cpu_dai->private_data;
356 struct ssp_device *ssp = priv->dev.ssp;
360 case PXA_SSP_AUDIO_DIV_ACDS:
361 val = (ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div);
362 ssp_write_reg(ssp, SSACD, val);
364 case PXA_SSP_AUDIO_DIV_SCDB:
365 val = ssp_read_reg(ssp, SSACD);
367 #if defined(CONFIG_PXA3xx)
372 case PXA_SSP_CLK_SCDB_1:
375 case PXA_SSP_CLK_SCDB_4:
377 #if defined(CONFIG_PXA3xx)
378 case PXA_SSP_CLK_SCDB_8:
388 ssp_write_reg(ssp, SSACD, val);
390 case PXA_SSP_DIV_SCR:
391 ssp_set_scr(&priv->dev, div);
401 * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
403 static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai,
404 int pll_id, unsigned int freq_in, unsigned int freq_out)
406 struct ssp_priv *priv = cpu_dai->private_data;
407 struct ssp_device *ssp = priv->dev.ssp;
408 u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70;
410 #if defined(CONFIG_PXA3xx)
412 ssp_write_reg(ssp, SSACDD, 0);
439 /* PXA3xx has a clock ditherer which can be used to generate
440 * a wider range of frequencies - calculate a value for it.
442 if (cpu_is_pxa3xx()) {
446 do_div(tmp, freq_out);
449 val = (val << 16) | 64;;
450 ssp_write_reg(ssp, SSACDD, val);
454 dev_dbg(&ssp->pdev->dev,
455 "Using SSACDD %x to supply %dHz\n",
464 ssp_write_reg(ssp, SSACD, ssacd);
470 * Set the active slots in TDM/Network mode
472 static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
473 unsigned int mask, int slots)
475 struct ssp_priv *priv = cpu_dai->private_data;
476 struct ssp_device *ssp = priv->dev.ssp;
479 sscr0 = ssp_read_reg(ssp, SSCR0) & ~SSCR0_SlotsPerFrm(7);
481 /* set number of active slots */
482 sscr0 |= SSCR0_SlotsPerFrm(slots);
483 ssp_write_reg(ssp, SSCR0, sscr0);
485 /* set active slot mask */
486 ssp_write_reg(ssp, SSTSA, mask);
487 ssp_write_reg(ssp, SSRSA, mask);
492 * Tristate the SSP DAI lines
494 static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
497 struct ssp_priv *priv = cpu_dai->private_data;
498 struct ssp_device *ssp = priv->dev.ssp;
501 sscr1 = ssp_read_reg(ssp, SSCR1);
506 ssp_write_reg(ssp, SSCR1, sscr1);
512 * Set up the SSP DAI format.
513 * The SSP Port must be inactive before calling this function as the
514 * physical interface format is changed.
516 static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
519 struct ssp_priv *priv = cpu_dai->private_data;
520 struct ssp_device *ssp = priv->dev.ssp;
525 /* check if we need to change anything at all */
526 if (priv->dai_fmt == fmt)
529 /* we can only change the settings if the port is not in use */
530 if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
531 dev_err(&ssp->pdev->dev,
532 "can't change hardware dai format: stream is in use");
536 /* reset port settings */
537 sscr0 = ssp_read_reg(ssp, SSCR0) &
538 (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
539 sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
542 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
543 case SND_SOC_DAIFMT_CBM_CFM:
544 sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR;
546 case SND_SOC_DAIFMT_CBM_CFS:
547 sscr1 |= SSCR1_SCLKDIR;
549 case SND_SOC_DAIFMT_CBS_CFS:
555 ssp_write_reg(ssp, SSCR0, sscr0);
556 ssp_write_reg(ssp, SSCR1, sscr1);
557 ssp_write_reg(ssp, SSPSP, sspsp);
559 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
560 case SND_SOC_DAIFMT_I2S:
561 sscr0 |= SSCR0_MOD | SSCR0_PSP;
562 sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
564 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
565 case SND_SOC_DAIFMT_NB_NF:
568 case SND_SOC_DAIFMT_NB_IF:
569 sspsp |= SSPSP_SFRMP | SSPSP_FSRT;
571 case SND_SOC_DAIFMT_IB_IF:
572 sspsp |= SSPSP_SFRMP;
579 case SND_SOC_DAIFMT_DSP_A:
581 case SND_SOC_DAIFMT_DSP_B:
582 sscr0 |= SSCR0_MOD | SSCR0_PSP;
583 sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
585 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
586 case SND_SOC_DAIFMT_NB_NF:
587 sspsp |= SSPSP_SFRMP;
589 case SND_SOC_DAIFMT_IB_IF:
600 ssp_write_reg(ssp, SSCR0, sscr0);
601 ssp_write_reg(ssp, SSCR1, sscr1);
602 ssp_write_reg(ssp, SSPSP, sspsp);
606 /* Since we are configuring the timings for the format by hand
607 * we have to defer some things until hw_params() where we
608 * know parameters like the sample size.
616 * Set the SSP audio DMA parameters and sample size.
617 * Can be called multiple times by oss emulation.
619 static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
620 struct snd_pcm_hw_params *params,
621 struct snd_soc_dai *dai)
623 struct snd_soc_pcm_runtime *rtd = substream->private_data;
624 struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
625 struct ssp_priv *priv = cpu_dai->private_data;
626 struct ssp_device *ssp = priv->dev.ssp;
627 int dma = 0, chn = params_channels(params);
630 int width = snd_pcm_format_physical_width(params_format(params));
632 /* select correct DMA params */
633 if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
634 dma = 1; /* capture DMA offset is 1,3 */
636 dma += 2; /* stereo DMA offset is 2, mono is 0 */
637 cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
639 dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
641 /* we can only change the settings if the port is not in use */
642 if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
645 /* clear selected SSP bits */
646 sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
647 ssp_write_reg(ssp, SSCR0, sscr0);
650 sscr0 = ssp_read_reg(ssp, SSCR0);
651 switch (params_format(params)) {
652 case SNDRV_PCM_FORMAT_S16_LE:
655 sscr0 |= SSCR0_FPCKE;
657 sscr0 |= SSCR0_DataSize(16);
658 /* use network mode (2 slots) for 16 bit stereo */
660 case SNDRV_PCM_FORMAT_S24_LE:
661 sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
662 /* we must be in network mode (2 slots) for 24 bit stereo */
664 case SNDRV_PCM_FORMAT_S32_LE:
665 sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
666 /* we must be in network mode (2 slots) for 32 bit stereo */
669 ssp_write_reg(ssp, SSCR0, sscr0);
671 switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
672 case SND_SOC_DAIFMT_I2S:
673 /* Cleared when the DAI format is set */
674 sspsp = ssp_read_reg(ssp, SSPSP) | SSPSP_SFRMWDTH(width);
675 ssp_write_reg(ssp, SSPSP, sspsp);
681 /* We always use a network mode so we always require TDM slots
682 * - complain loudly and fail if they've not been set up yet.
684 if (!(ssp_read_reg(ssp, SSTSA) & 0xf)) {
685 dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
694 static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
695 struct snd_soc_dai *dai)
697 struct snd_soc_pcm_runtime *rtd = substream->private_data;
698 struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
700 struct ssp_priv *priv = cpu_dai->private_data;
701 struct ssp_device *ssp = priv->dev.ssp;
705 case SNDRV_PCM_TRIGGER_RESUME:
706 ssp_enable(&priv->dev);
708 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
709 val = ssp_read_reg(ssp, SSCR1);
710 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
714 ssp_write_reg(ssp, SSCR1, val);
715 val = ssp_read_reg(ssp, SSSR);
716 ssp_write_reg(ssp, SSSR, val);
718 case SNDRV_PCM_TRIGGER_START:
719 val = ssp_read_reg(ssp, SSCR1);
720 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
724 ssp_write_reg(ssp, SSCR1, val);
725 ssp_enable(&priv->dev);
727 case SNDRV_PCM_TRIGGER_STOP:
728 val = ssp_read_reg(ssp, SSCR1);
729 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
733 ssp_write_reg(ssp, SSCR1, val);
735 case SNDRV_PCM_TRIGGER_SUSPEND:
736 ssp_disable(&priv->dev);
738 case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
739 val = ssp_read_reg(ssp, SSCR1);
740 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
744 ssp_write_reg(ssp, SSCR1, val);
756 static int pxa_ssp_probe(struct platform_device *pdev,
757 struct snd_soc_dai *dai)
759 struct ssp_priv *priv;
762 priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
766 priv->dev.ssp = ssp_request(dai->id + 1, "SoC audio");
767 if (priv->dev.ssp == NULL) {
772 dai->private_data = priv;
781 static void pxa_ssp_remove(struct platform_device *pdev,
782 struct snd_soc_dai *dai)
784 struct ssp_priv *priv = dai->private_data;
785 ssp_free(priv->dev.ssp);
788 #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
789 SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
790 SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
791 SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
793 #define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
794 SNDRV_PCM_FMTBIT_S24_LE | \
795 SNDRV_PCM_FMTBIT_S32_LE)
797 struct snd_soc_dai pxa_ssp_dai[] = {
799 .name = "pxa2xx-ssp1",
801 .probe = pxa_ssp_probe,
802 .remove = pxa_ssp_remove,
803 .suspend = pxa_ssp_suspend,
804 .resume = pxa_ssp_resume,
808 .rates = PXA_SSP_RATES,
809 .formats = PXA_SSP_FORMATS,
814 .rates = PXA_SSP_RATES,
815 .formats = PXA_SSP_FORMATS,
818 .startup = pxa_ssp_startup,
819 .shutdown = pxa_ssp_shutdown,
820 .trigger = pxa_ssp_trigger,
821 .hw_params = pxa_ssp_hw_params,
822 .set_sysclk = pxa_ssp_set_dai_sysclk,
823 .set_clkdiv = pxa_ssp_set_dai_clkdiv,
824 .set_pll = pxa_ssp_set_dai_pll,
825 .set_fmt = pxa_ssp_set_dai_fmt,
826 .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
827 .set_tristate = pxa_ssp_set_dai_tristate,
830 { .name = "pxa2xx-ssp2",
832 .probe = pxa_ssp_probe,
833 .remove = pxa_ssp_remove,
834 .suspend = pxa_ssp_suspend,
835 .resume = pxa_ssp_resume,
839 .rates = PXA_SSP_RATES,
840 .formats = PXA_SSP_FORMATS,
845 .rates = PXA_SSP_RATES,
846 .formats = PXA_SSP_FORMATS,
849 .startup = pxa_ssp_startup,
850 .shutdown = pxa_ssp_shutdown,
851 .trigger = pxa_ssp_trigger,
852 .hw_params = pxa_ssp_hw_params,
853 .set_sysclk = pxa_ssp_set_dai_sysclk,
854 .set_clkdiv = pxa_ssp_set_dai_clkdiv,
855 .set_pll = pxa_ssp_set_dai_pll,
856 .set_fmt = pxa_ssp_set_dai_fmt,
857 .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
858 .set_tristate = pxa_ssp_set_dai_tristate,
862 .name = "pxa2xx-ssp3",
864 .probe = pxa_ssp_probe,
865 .remove = pxa_ssp_remove,
866 .suspend = pxa_ssp_suspend,
867 .resume = pxa_ssp_resume,
871 .rates = PXA_SSP_RATES,
872 .formats = PXA_SSP_FORMATS,
877 .rates = PXA_SSP_RATES,
878 .formats = PXA_SSP_FORMATS,
881 .startup = pxa_ssp_startup,
882 .shutdown = pxa_ssp_shutdown,
883 .trigger = pxa_ssp_trigger,
884 .hw_params = pxa_ssp_hw_params,
885 .set_sysclk = pxa_ssp_set_dai_sysclk,
886 .set_clkdiv = pxa_ssp_set_dai_clkdiv,
887 .set_pll = pxa_ssp_set_dai_pll,
888 .set_fmt = pxa_ssp_set_dai_fmt,
889 .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
890 .set_tristate = pxa_ssp_set_dai_tristate,
894 .name = "pxa2xx-ssp4",
896 .probe = pxa_ssp_probe,
897 .remove = pxa_ssp_remove,
898 .suspend = pxa_ssp_suspend,
899 .resume = pxa_ssp_resume,
903 .rates = PXA_SSP_RATES,
904 .formats = PXA_SSP_FORMATS,
909 .rates = PXA_SSP_RATES,
910 .formats = PXA_SSP_FORMATS,
913 .startup = pxa_ssp_startup,
914 .shutdown = pxa_ssp_shutdown,
915 .trigger = pxa_ssp_trigger,
916 .hw_params = pxa_ssp_hw_params,
917 .set_sysclk = pxa_ssp_set_dai_sysclk,
918 .set_clkdiv = pxa_ssp_set_dai_clkdiv,
919 .set_pll = pxa_ssp_set_dai_pll,
920 .set_fmt = pxa_ssp_set_dai_fmt,
921 .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
922 .set_tristate = pxa_ssp_set_dai_tristate,
926 EXPORT_SYMBOL_GPL(pxa_ssp_dai);
928 static int __init pxa_ssp_init(void)
930 return snd_soc_register_dais(pxa_ssp_dai, ARRAY_SIZE(pxa_ssp_dai));
932 module_init(pxa_ssp_init);
934 static void __exit pxa_ssp_exit(void)
936 snd_soc_unregister_dais(pxa_ssp_dai, ARRAY_SIZE(pxa_ssp_dai));
938 module_exit(pxa_ssp_exit);
940 /* Module information */
941 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
942 MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
943 MODULE_LICENSE("GPL");