net/wireless/reg.c

   1 /*
   2  * Copyright 2002-2005, Instant802 Networks, Inc.
   3  * Copyright 2005-2006, Devicescape Software, Inc.
   4  * Copyright 2007       Johannes Berg <johannes@sipsolutions.net>
   5  * Copyright 2008       Luis R. Rodriguez <lrodriguz@atheros.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 /**
  13  * DOC: Wireless regulatory infrastructure
  14  *
  15  * The usual implementation is for a driver to read a device EEPROM to
  16  * determine which regulatory domain it should be operating under, then
  17  * looking up the allowable channels in a driver-local table and finally
  18  * registering those channels in the wiphy structure.
  19  *
  20  * Another set of compliance enforcement is for drivers to use their
  21  * own compliance limits which can be stored on the EEPROM. The host
  22  * driver or firmware may ensure these are used.
  23  *
  24  * In addition to all this we provide an extra layer of regulatory
  25  * conformance. For drivers which do not have any regulatory
  26  * information CRDA provides the complete regulatory solution.
  27  * For others it provides a community effort on further restrictions
  28  * to enhance compliance.
  29  *
  30  * Note: When number of rules --> infinity we will not be able to
  31  * index on alpha2 any more, instead we'll probably have to
  32  * rely on some SHA1 checksum of the regdomain for example.
  33  *
  34  */
  35 #include <linux/kernel.h>
  36 #include <linux/list.h>
  37 #include <linux/random.h>
  38 #include <linux/nl80211.h>
  39 #include <linux/platform_device.h>
  40 #include <net/wireless.h>
  41 #include <net/cfg80211.h>
  42 #include "core.h"
  43 #include "reg.h"
  44 #include "nl80211.h"
  45
  46 /* Receipt of information from last regulatory request */
  47 static struct regulatory_request *last_request;
  48
  49 /* To trigger userspace events */
  50 static struct platform_device *reg_pdev;
  51
  52 /* Keep the ordering from large to small */
  53 static u32 supported_bandwidths[] = {
  54         MHZ_TO_KHZ(40),
  55         MHZ_TO_KHZ(20),
  56 };
  57
  58 /*
  59  * Central wireless core regulatory domains, we only need two,
  60  * the current one and a world regulatory domain in case we have no
  61  * information to give us an alpha2
  62  */
  63 const struct ieee80211_regdomain *cfg80211_regdomain;
  64
  65 /*
  66  * We use this as a place for the rd structure built from the
  67  * last parsed country IE to rest until CRDA gets back to us with
  68  * what it thinks should apply for the same country
  69  */
  70 static const struct ieee80211_regdomain *country_ie_regdomain;
  71
  72 /* Used to queue up regulatory hints */
  73 static LIST_HEAD(reg_requests_list);
  74 static spinlock_t reg_requests_lock;
  75
  76 /* Used to queue up beacon hints for review */
  77 static LIST_HEAD(reg_pending_beacons);
  78 static spinlock_t reg_pending_beacons_lock;
  79
  80 /* Used to keep track of processed beacon hints */
  81 static LIST_HEAD(reg_beacon_list);
  82
  83 struct reg_beacon {
  84         struct list_head list;
  85         struct ieee80211_channel chan;
  86 };
  87
  88 /* We keep a static world regulatory domain in case of the absence of CRDA */
  89 static const struct ieee80211_regdomain world_regdom = {
  90         .n_reg_rules = 5,
  91         .alpha2 =  "00",
  92         .reg_rules = {
  93                 /* IEEE 802.11b/g, channels 1..11 */
  94                 REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
  95                 /* IEEE 802.11b/g, channels 12..13. No HT40
  96                  * channel fits here. */
  97                 REG_RULE(2467-10, 2472+10, 20, 6, 20,
  98                         NL80211_RRF_PASSIVE_SCAN |
  99                         NL80211_RRF_NO_IBSS),
 100                 /* IEEE 802.11 channel 14 - Only JP enables
 101                  * this and for 802.11b only */
 102                 REG_RULE(2484-10, 2484+10, 20, 6, 20,
 103                         NL80211_RRF_PASSIVE_SCAN |
 104                         NL80211_RRF_NO_IBSS |
 105                         NL80211_RRF_NO_OFDM),
 106                 /* IEEE 802.11a, channel 36..48 */
 107                 REG_RULE(5180-10, 5240+10, 40, 6, 20,
 108                         NL80211_RRF_PASSIVE_SCAN |
 109                         NL80211_RRF_NO_IBSS),
 110
 111                 /* NB: 5260 MHz - 5700 MHz requies DFS */
 112
 113                 /* IEEE 802.11a, channel 149..165 */
 114                 REG_RULE(5745-10, 5825+10, 40, 6, 20,
 115                         NL80211_RRF_PASSIVE_SCAN |
 116                         NL80211_RRF_NO_IBSS),
 117         }
 118 };
 119
 120 static const struct ieee80211_regdomain *cfg80211_world_regdom =
 121         &world_regdom;
 122
 123 #ifdef CONFIG_WIRELESS_OLD_REGULATORY
 124 static char *ieee80211_regdom = "US";
 125 module_param(ieee80211_regdom, charp, 0444);
 126 MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
 127
 128 /*
 129  * We assume 40 MHz bandwidth for the old regulatory work.
 130  * We make emphasis we are using the exact same frequencies
 131  * as before
 132  */
 133
 134 static const struct ieee80211_regdomain us_regdom = {
 135         .n_reg_rules = 6,
 136         .alpha2 =  "US",
 137         .reg_rules = {
 138                 /* IEEE 802.11b/g, channels 1..11 */
 139                 REG_RULE(2412-10, 2462+10, 40, 6, 27, 0),
 140                 /* IEEE 802.11a, channel 36 */
 141                 REG_RULE(5180-10, 5180+10, 40, 6, 23, 0),
 142                 /* IEEE 802.11a, channel 40 */
 143                 REG_RULE(5200-10, 5200+10, 40, 6, 23, 0),
 144                 /* IEEE 802.11a, channel 44 */
 145                 REG_RULE(5220-10, 5220+10, 40, 6, 23, 0),
 146                 /* IEEE 802.11a, channels 48..64 */
 147                 REG_RULE(5240-10, 5320+10, 40, 6, 23, 0),
 148                 /* IEEE 802.11a, channels 149..165, outdoor */
 149                 REG_RULE(5745-10, 5825+10, 40, 6, 30, 0),
 150         }
 151 };
 152
 153 static const struct ieee80211_regdomain jp_regdom = {
 154         .n_reg_rules = 3,
 155         .alpha2 =  "JP",
 156         .reg_rules = {
 157                 /* IEEE 802.11b/g, channels 1..14 */
 158                 REG_RULE(2412-10, 2484+10, 40, 6, 20, 0),
 159                 /* IEEE 802.11a, channels 34..48 */
 160                 REG_RULE(5170-10, 5240+10, 40, 6, 20,
 161                         NL80211_RRF_PASSIVE_SCAN),
 162                 /* IEEE 802.11a, channels 52..64 */
 163                 REG_RULE(5260-10, 5320+10, 40, 6, 20,
 164                         NL80211_RRF_NO_IBSS |
 165                         NL80211_RRF_DFS),
 166         }
 167 };
 168
 169 static const struct ieee80211_regdomain eu_regdom = {
 170         .n_reg_rules = 6,
 171         /*
 172          * This alpha2 is bogus, we leave it here just for stupid
 173          * backward compatibility
 174          */
 175         .alpha2 =  "EU",
 176         .reg_rules = {
 177                 /* IEEE 802.11b/g, channels 1..13 */
 178                 REG_RULE(2412-10, 2472+10, 40, 6, 20, 0),
 179                 /* IEEE 802.11a, channel 36 */
 180                 REG_RULE(5180-10, 5180+10, 40, 6, 23,
 181                         NL80211_RRF_PASSIVE_SCAN),
 182                 /* IEEE 802.11a, channel 40 */
 183                 REG_RULE(5200-10, 5200+10, 40, 6, 23,
 184                         NL80211_RRF_PASSIVE_SCAN),
 185                 /* IEEE 802.11a, channel 44 */
 186                 REG_RULE(5220-10, 5220+10, 40, 6, 23,
 187                         NL80211_RRF_PASSIVE_SCAN),
 188                 /* IEEE 802.11a, channels 48..64 */
 189                 REG_RULE(5240-10, 5320+10, 40, 6, 20,
 190                         NL80211_RRF_NO_IBSS |
 191                         NL80211_RRF_DFS),
 192                 /* IEEE 802.11a, channels 100..140 */
 193                 REG_RULE(5500-10, 5700+10, 40, 6, 30,
 194                         NL80211_RRF_NO_IBSS |
 195                         NL80211_RRF_DFS),
 196         }
 197 };
 198
 199 static const struct ieee80211_regdomain *static_regdom(char *alpha2)
 200 {
 201         if (alpha2[0] == 'U' && alpha2[1] == 'S')
 202                 return &us_regdom;
 203         if (alpha2[0] == 'J' && alpha2[1] == 'P')
 204                 return &jp_regdom;
 205         if (alpha2[0] == 'E' && alpha2[1] == 'U')
 206                 return &eu_regdom;
 207         /* Default, as per the old rules */
 208         return &us_regdom;
 209 }
 210
 211 static bool is_old_static_regdom(const struct ieee80211_regdomain *rd)
 212 {
 213         if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom)
 214                 return true;
 215         return false;
 216 }
 217 #else
 218 static inline bool is_old_static_regdom(const struct ieee80211_regdomain *rd)
 219 {
 220         return false;
 221 }
 222 #endif
 223
 224 static void reset_regdomains(void)
 225 {
 226         /* avoid freeing static information or freeing something twice */
 227         if (cfg80211_regdomain == cfg80211_world_regdom)
 228                 cfg80211_regdomain = NULL;
 229         if (cfg80211_world_regdom == &world_regdom)
 230                 cfg80211_world_regdom = NULL;
 231         if (cfg80211_regdomain == &world_regdom)
 232                 cfg80211_regdomain = NULL;
 233         if (is_old_static_regdom(cfg80211_regdomain))
 234                 cfg80211_regdomain = NULL;
 235
 236         kfree(cfg80211_regdomain);
 237         kfree(cfg80211_world_regdom);
 238
 239         cfg80211_world_regdom = &world_regdom;
 240         cfg80211_regdomain = NULL;
 241 }
 242
 243 /*
 244  * Dynamic world regulatory domain requested by the wireless
 245  * core upon initialization
 246  */
 247 static void update_world_regdomain(const struct ieee80211_regdomain *rd)
 248 {
 249         BUG_ON(!last_request);
 250
 251         reset_regdomains();
 252
 253         cfg80211_world_regdom = rd;
 254         cfg80211_regdomain = rd;
 255 }
 256
 257 bool is_world_regdom(const char *alpha2)
 258 {
 259         if (!alpha2)
 260                 return false;
 261         if (alpha2[0] == '0' && alpha2[1] == '0')
 262                 return true;
 263         return false;
 264 }
 265
 266 static bool is_alpha2_set(const char *alpha2)
 267 {
 268         if (!alpha2)
 269                 return false;
 270         if (alpha2[0] != 0 && alpha2[1] != 0)
 271                 return true;
 272         return false;
 273 }
 274
 275 static bool is_alpha_upper(char letter)
 276 {
 277         /* ASCII A - Z */
 278         if (letter >= 65 && letter <= 90)
 279                 return true;
 280         return false;
 281 }
 282
 283 static bool is_unknown_alpha2(const char *alpha2)
 284 {
 285         if (!alpha2)
 286                 return false;
 287         /*
 288          * Special case where regulatory domain was built by driver
 289          * but a specific alpha2 cannot be determined
 290          */
 291         if (alpha2[0] == '9' && alpha2[1] == '9')
 292                 return true;
 293         return false;
 294 }
 295
 296 static bool is_intersected_alpha2(const char *alpha2)
 297 {
 298         if (!alpha2)
 299                 return false;
 300         /*
 301          * Special case where regulatory domain is the
 302          * result of an intersection between two regulatory domain
 303          * structures
 304          */
 305         if (alpha2[0] == '9' && alpha2[1] == '8')
 306                 return true;
 307         return false;
 308 }
 309
 310 static bool is_an_alpha2(const char *alpha2)
 311 {
 312         if (!alpha2)
 313                 return false;
 314         if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1]))
 315                 return true;
 316         return false;
 317 }
 318
 319 static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y)
 320 {
 321         if (!alpha2_x || !alpha2_y)
 322                 return false;
 323         if (alpha2_x[0] == alpha2_y[0] &&
 324                 alpha2_x[1] == alpha2_y[1])
 325                 return true;
 326         return false;
 327 }
 328
 329 static bool regdom_changes(const char *alpha2)
 330 {
 331         assert_cfg80211_lock();
 332
 333         if (!cfg80211_regdomain)
 334                 return true;
 335         if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2))
 336                 return false;
 337         return true;
 338 }
 339
 340 /**
 341  * country_ie_integrity_changes - tells us if the country IE has changed
 342  * @checksum: checksum of country IE of fields we are interested in
 343  *
 344  * If the country IE has not changed you can ignore it safely. This is
 345  * useful to determine if two devices are seeing two different country IEs
 346  * even on the same alpha2. Note that this will return false if no IE has
 347  * been set on the wireless core yet.
 348  */
 349 static bool country_ie_integrity_changes(u32 checksum)
 350 {
 351         /* If no IE has been set then the checksum doesn't change */
 352         if (unlikely(!last_request->country_ie_checksum))
 353                 return false;
 354         if (unlikely(last_request->country_ie_checksum != checksum))
 355                 return true;
 356         return false;
 357 }
 358
 359 /*
 360  * This lets us keep regulatory code which is updated on a regulatory
 361  * basis in userspace.
 362  */
 363 static int call_crda(const char *alpha2)
 364 {
 365         char country_env[9 + 2] = "COUNTRY=";
 366         char *envp[] = {
 367                 country_env,
 368                 NULL
 369         };
 370
 371         if (!is_world_regdom((char *) alpha2))
 372                 printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n",
 373                         alpha2[0], alpha2[1]);
 374         else
 375                 printk(KERN_INFO "cfg80211: Calling CRDA to update world "
 376                         "regulatory domain\n");
 377
 378         country_env[8] = alpha2[0];
 379         country_env[9] = alpha2[1];
 380
 381         return kobject_uevent_env(&reg_pdev->dev.kobj, KOBJ_CHANGE, envp);
 382 }
 383
 384 /* Used by nl80211 before kmalloc'ing our regulatory domain */
 385 bool reg_is_valid_request(const char *alpha2)
 386 {
 387         if (!last_request)
 388                 return false;
 389
 390         return alpha2_equal(last_request->alpha2, alpha2);
 391 }
 392
 393 /* Sanity check on a regulatory rule */
 394 static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule)
 395 {
 396         const struct ieee80211_freq_range *freq_range = &rule->freq_range;
 397         u32 freq_diff;
 398
 399         if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0)
 400                 return false;
 401
 402         if (freq_range->start_freq_khz > freq_range->end_freq_khz)
 403                 return false;
 404
 405         freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
 406
 407         if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
 408                         freq_range->max_bandwidth_khz > freq_diff)
 409                 return false;
 410
 411         return true;
 412 }
 413
 414 static bool is_valid_rd(const struct ieee80211_regdomain *rd)
 415 {
 416         const struct ieee80211_reg_rule *reg_rule = NULL;
 417         unsigned int i;
 418
 419         if (!rd->n_reg_rules)
 420                 return false;
 421
 422         if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES))
 423                 return false;
 424
 425         for (i = 0; i < rd->n_reg_rules; i++) {
 426                 reg_rule = &rd->reg_rules[i];
 427                 if (!is_valid_reg_rule(reg_rule))
 428                         return false;
 429         }
 430
 431         return true;
 432 }
 433
 434 /* Returns value in KHz */
 435 static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
 436         u32 freq)
 437 {
 438         unsigned int i;
 439         for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) {
 440                 u32 start_freq_khz = freq - supported_bandwidths[i]/2;
 441                 u32 end_freq_khz = freq + supported_bandwidths[i]/2;
 442                 if (start_freq_khz >= freq_range->start_freq_khz &&
 443                         end_freq_khz <= freq_range->end_freq_khz)
 444                         return supported_bandwidths[i];
 445         }
 446         return 0;
 447 }
 448
 449 /**
 450  * freq_in_rule_band - tells us if a frequency is in a frequency band
 451  * @freq_range: frequency rule we want to query
 452  * @freq_khz: frequency we are inquiring about
 453  *
 454  * This lets us know if a specific frequency rule is or is not relevant to
 455  * a specific frequency's band. Bands are device specific and artificial
 456  * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is
 457  * safe for now to assume that a frequency rule should not be part of a
 458  * frequency's band if the start freq or end freq are off by more than 2 GHz.
 459  * This resolution can be lowered and should be considered as we add
 460  * regulatory rule support for other "bands".
 461  **/
 462 static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
 463         u32 freq_khz)
 464 {
 465 #define ONE_GHZ_IN_KHZ  1000000
 466         if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
 467                 return true;
 468         if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
 469                 return true;
 470         return false;
 471 #undef ONE_GHZ_IN_KHZ
 472 }
 473
 474 /*
 475  * Converts a country IE to a regulatory domain. A regulatory domain
 476  * structure has a lot of information which the IE doesn't yet have,
 477  * so for the other values we use upper max values as we will intersect
 478  * with our userspace regulatory agent to get lower bounds.
 479  */
 480 static struct ieee80211_regdomain *country_ie_2_rd(
 481                                 u8 *country_ie,
 482                                 u8 country_ie_len,
 483                                 u32 *checksum)
 484 {
 485         struct ieee80211_regdomain *rd = NULL;
 486         unsigned int i = 0;
 487         char alpha2[2];
 488         u32 flags = 0;
 489         u32 num_rules = 0, size_of_regd = 0;
 490         u8 *triplets_start = NULL;
 491         u8 len_at_triplet = 0;
 492         /* the last channel we have registered in a subband (triplet) */
 493         int last_sub_max_channel = 0;
 494
 495         *checksum = 0xDEADBEEF;
 496
 497         /* Country IE requirements */
 498         BUG_ON(country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN ||
 499                 country_ie_len & 0x01);
 500
 501         alpha2[0] = country_ie[0];
 502         alpha2[1] = country_ie[1];
 503
 504         /*
 505          * Third octet can be:
 506          *    'I' - Indoor
 507          *    'O' - Outdoor
 508          *
 509          *  anything else we assume is no restrictions
 510          */
 511         if (country_ie[2] == 'I')
 512                 flags = NL80211_RRF_NO_OUTDOOR;
 513         else if (country_ie[2] == 'O')
 514                 flags = NL80211_RRF_NO_INDOOR;
 515
 516         country_ie += 3;
 517         country_ie_len -= 3;
 518
 519         triplets_start = country_ie;
 520         len_at_triplet = country_ie_len;
 521
 522         *checksum ^= ((flags ^ alpha2[0] ^ alpha2[1]) << 8);
 523
 524         /*
 525          * We need to build a reg rule for each triplet, but first we must
 526          * calculate the number of reg rules we will need. We will need one
 527          * for each channel subband
 528          */
 529         while (country_ie_len >= 3) {
 530                 int end_channel = 0;
 531                 struct ieee80211_country_ie_triplet *triplet =
 532                         (struct ieee80211_country_ie_triplet *) country_ie;
 533                 int cur_sub_max_channel = 0, cur_channel = 0;
 534
 535                 if (triplet->ext.reg_extension_id >=
 536                                 IEEE80211_COUNTRY_EXTENSION_ID) {
 537                         country_ie += 3;
 538                         country_ie_len -= 3;
 539                         continue;
 540                 }
 541
 542                 /* 2 GHz */
 543                 if (triplet->chans.first_channel <= 14)
 544                         end_channel = triplet->chans.first_channel +
 545                                 triplet->chans.num_channels;
 546                 else
 547                         /*
 548                          * 5 GHz -- For example in country IEs if the first
 549                          * channel given is 36 and the number of channels is 4
 550                          * then the individual channel numbers defined for the
 551                          * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
 552                          * and not 36, 37, 38, 39.
 553                          *
 554                          * See: http://tinyurl.com/11d-clarification
 555                          */
 556                         end_channel =  triplet->chans.first_channel +
 557                                 (4 * (triplet->chans.num_channels - 1));
 558
 559                 cur_channel = triplet->chans.first_channel;
 560                 cur_sub_max_channel = end_channel;
 561
 562                 /* Basic sanity check */
 563                 if (cur_sub_max_channel < cur_channel)
 564                         return NULL;
 565
 566                 /*
 567                  * Do not allow overlapping channels. Also channels
 568                  * passed in each subband must be monotonically
 569                  * increasing
 570                  */
 571                 if (last_sub_max_channel) {
 572                         if (cur_channel <= last_sub_max_channel)
 573                                 return NULL;
 574                         if (cur_sub_max_channel <= last_sub_max_channel)
 575                                 return NULL;
 576                 }
 577
 578                 /*
 579                  * When dot11RegulatoryClassesRequired is supported
 580                  * we can throw ext triplets as part of this soup,
 581                  * for now we don't care when those change as we
 582                  * don't support them
 583                  */
 584                 *checksum ^= ((cur_channel ^ cur_sub_max_channel) << 8) |
 585                   ((cur_sub_max_channel ^ cur_sub_max_channel) << 16) |
 586                   ((triplet->chans.max_power ^ cur_sub_max_channel) << 24);
 587
 588                 last_sub_max_channel = cur_sub_max_channel;
 589
 590                 country_ie += 3;
 591                 country_ie_len -= 3;
 592                 num_rules++;
 593
 594                 /*
 595                  * Note: this is not a IEEE requirement but
 596                  * simply a memory requirement
 597                  */
 598                 if (num_rules > NL80211_MAX_SUPP_REG_RULES)
 599                         return NULL;
 600         }
 601
 602         country_ie = triplets_start;
 603         country_ie_len = len_at_triplet;
 604
 605         size_of_regd = sizeof(struct ieee80211_regdomain) +
 606                 (num_rules * sizeof(struct ieee80211_reg_rule));
 607
 608         rd = kzalloc(size_of_regd, GFP_KERNEL);
 609         if (!rd)
 610                 return NULL;
 611
 612         rd->n_reg_rules = num_rules;
 613         rd->alpha2[0] = alpha2[0];
 614         rd->alpha2[1] = alpha2[1];
 615
 616         /* This time around we fill in the rd */
 617         while (country_ie_len >= 3) {
 618                 int end_channel = 0;
 619                 struct ieee80211_country_ie_triplet *triplet =
 620                         (struct ieee80211_country_ie_triplet *) country_ie;
 621                 struct ieee80211_reg_rule *reg_rule = NULL;
 622                 struct ieee80211_freq_range *freq_range = NULL;
 623                 struct ieee80211_power_rule *power_rule = NULL;
 624
 625                 /*
 626                  * Must parse if dot11RegulatoryClassesRequired is true,
 627                  * we don't support this yet
 628                  */
 629                 if (triplet->ext.reg_extension_id >=
 630                                 IEEE80211_COUNTRY_EXTENSION_ID) {
 631                         country_ie += 3;
 632                         country_ie_len -= 3;
 633                         continue;
 634                 }
 635
 636                 reg_rule = &rd->reg_rules[i];
 637                 freq_range = &reg_rule->freq_range;
 638                 power_rule = &reg_rule->power_rule;
 639
 640                 reg_rule->flags = flags;
 641
 642                 /* 2 GHz */
 643                 if (triplet->chans.first_channel <= 14)
 644                         end_channel = triplet->chans.first_channel +
 645                                 triplet->chans.num_channels;
 646                 else
 647                         end_channel =  triplet->chans.first_channel +
 648                                 (4 * (triplet->chans.num_channels - 1));
 649
 650                 /*
 651                  * The +10 is since the regulatory domain expects
 652                  * the actual band edge, not the center of freq for
 653                  * its start and end freqs, assuming 20 MHz bandwidth on
 654                  * the channels passed
 655                  */
 656                 freq_range->start_freq_khz =
 657                         MHZ_TO_KHZ(ieee80211_channel_to_frequency(
 658                                 triplet->chans.first_channel) - 10);
 659                 freq_range->end_freq_khz =
 660                         MHZ_TO_KHZ(ieee80211_channel_to_frequency(
 661                                 end_channel) + 10);
 662
 663                 /*
 664                  * These are large arbitrary values we use to intersect later.
 665                  * Increment this if we ever support >= 40 MHz channels
 666                  * in IEEE 802.11
 667                  */
 668                 freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40);
 669                 power_rule->max_antenna_gain = DBI_TO_MBI(100);
 670                 power_rule->max_eirp = DBM_TO_MBM(100);
 671
 672                 country_ie += 3;
 673                 country_ie_len -= 3;
 674                 i++;
 675
 676                 BUG_ON(i > NL80211_MAX_SUPP_REG_RULES);
 677         }
 678
 679         return rd;
 680 }
 681
 682
 683 /*
 684  * Helper for regdom_intersect(), this does the real
 685  * mathematical intersection fun
 686  */
 687 static int reg_rules_intersect(
 688         const struct ieee80211_reg_rule *rule1,
 689         const struct ieee80211_reg_rule *rule2,
 690         struct ieee80211_reg_rule *intersected_rule)
 691 {
 692         const struct ieee80211_freq_range *freq_range1, *freq_range2;
 693         struct ieee80211_freq_range *freq_range;
 694         const struct ieee80211_power_rule *power_rule1, *power_rule2;
 695         struct ieee80211_power_rule *power_rule;
 696         u32 freq_diff;
 697
 698         freq_range1 = &rule1->freq_range;
 699         freq_range2 = &rule2->freq_range;
 700         freq_range = &intersected_rule->freq_range;
 701
 702         power_rule1 = &rule1->power_rule;
 703         power_rule2 = &rule2->power_rule;
 704         power_rule = &intersected_rule->power_rule;
 705
 706         freq_range->start_freq_khz = max(freq_range1->start_freq_khz,
 707                 freq_range2->start_freq_khz);
 708         freq_range->end_freq_khz = min(freq_range1->end_freq_khz,
 709                 freq_range2->end_freq_khz);
 710         freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz,
 711                 freq_range2->max_bandwidth_khz);
 712
 713         freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
 714         if (freq_range->max_bandwidth_khz > freq_diff)
 715                 freq_range->max_bandwidth_khz = freq_diff;
 716
 717         power_rule->max_eirp = min(power_rule1->max_eirp,
 718                 power_rule2->max_eirp);
 719         power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain,
 720                 power_rule2->max_antenna_gain);
 721
 722         intersected_rule->flags = (rule1->flags | rule2->flags);
 723
 724         if (!is_valid_reg_rule(intersected_rule))
 725                 return -EINVAL;
 726
 727         return 0;
 728 }
 729
 730 /**
 731  * regdom_intersect - do the intersection between two regulatory domains
 732  * @rd1: first regulatory domain
 733  * @rd2: second regulatory domain
 734  *
 735  * Use this function to get the intersection between two regulatory domains.
 736  * Once completed we will mark the alpha2 for the rd as intersected, "98",
 737  * as no one single alpha2 can represent this regulatory domain.
 738  *
 739  * Returns a pointer to the regulatory domain structure which will hold the
 740  * resulting intersection of rules between rd1 and rd2. We will
 741  * kzalloc() this structure for you.
 742  */
 743 static struct ieee80211_regdomain *regdom_intersect(
 744         const struct ieee80211_regdomain *rd1,
 745         const struct ieee80211_regdomain *rd2)
 746 {
 747         int r, size_of_regd;
 748         unsigned int x, y;
 749         unsigned int num_rules = 0, rule_idx = 0;
 750         const struct ieee80211_reg_rule *rule1, *rule2;
 751         struct ieee80211_reg_rule *intersected_rule;
 752         struct ieee80211_regdomain *rd;
 753         /* This is just a dummy holder to help us count */
 754         struct ieee80211_reg_rule irule;
 755
 756         /* Uses the stack temporarily for counter arithmetic */
 757         intersected_rule = &irule;
 758
 759         memset(intersected_rule, 0, sizeof(struct ieee80211_reg_rule));
 760
 761         if (!rd1 || !rd2)
 762                 return NULL;
 763
 764         /*
 765          * First we get a count of the rules we'll need, then we actually
 766          * build them. This is to so we can malloc() and free() a
 767          * regdomain once. The reason we use reg_rules_intersect() here
 768          * is it will return -EINVAL if the rule computed makes no sense.
 769          * All rules that do check out OK are valid.
 770          */
 771
 772         for (x = 0; x < rd1->n_reg_rules; x++) {
 773                 rule1 = &rd1->reg_rules[x];
 774                 for (y = 0; y < rd2->n_reg_rules; y++) {
 775                         rule2 = &rd2->reg_rules[y];
 776                         if (!reg_rules_intersect(rule1, rule2,
 777                                         intersected_rule))
 778                                 num_rules++;
 779                         memset(intersected_rule, 0,
 780                                         sizeof(struct ieee80211_reg_rule));
 781                 }
 782         }
 783
 784         if (!num_rules)
 785                 return NULL;
 786
 787         size_of_regd = sizeof(struct ieee80211_regdomain) +
 788                 ((num_rules + 1) * sizeof(struct ieee80211_reg_rule));
 789
 790         rd = kzalloc(size_of_regd, GFP_KERNEL);
 791         if (!rd)
 792                 return NULL;
 793
 794         for (x = 0; x < rd1->n_reg_rules; x++) {
 795                 rule1 = &rd1->reg_rules[x];
 796                 for (y = 0; y < rd2->n_reg_rules; y++) {
 797                         rule2 = &rd2->reg_rules[y];
 798                         /*
 799                          * This time around instead of using the stack lets
 800                          * write to the target rule directly saving ourselves
 801                          * a memcpy()
 802                          */
 803                         intersected_rule = &rd->reg_rules[rule_idx];
 804                         r = reg_rules_intersect(rule1, rule2,
 805                                 intersected_rule);
 806                         /*
 807                          * No need to memset here the intersected rule here as
 808                          * we're not using the stack anymore
 809                          */
 810                         if (r)
 811                                 continue;
 812                         rule_idx++;
 813                 }
 814         }
 815
 816         if (rule_idx != num_rules) {
 817                 kfree(rd);
 818                 return NULL;
 819         }
 820
 821         rd->n_reg_rules = num_rules;
 822         rd->alpha2[0] = '9';
 823         rd->alpha2[1] = '8';
 824
 825         return rd;
 826 }
 827
 828 /*
 829  * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may
 830  * want to just have the channel structure use these
 831  */
 832 static u32 map_regdom_flags(u32 rd_flags)
 833 {
 834         u32 channel_flags = 0;
 835         if (rd_flags & NL80211_RRF_PASSIVE_SCAN)
 836                 channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN;
 837         if (rd_flags & NL80211_RRF_NO_IBSS)
 838                 channel_flags |= IEEE80211_CHAN_NO_IBSS;
 839         if (rd_flags & NL80211_RRF_DFS)
 840                 channel_flags |= IEEE80211_CHAN_RADAR;
 841         return channel_flags;
 842 }
 843
 844 static int freq_reg_info_regd(struct wiphy *wiphy,
 845                               u32 center_freq,
 846                               u32 *bandwidth,
 847                               const struct ieee80211_reg_rule **reg_rule,
 848                               const struct ieee80211_regdomain *custom_regd)
 849 {
 850         int i;
 851         bool band_rule_found = false;
 852         const struct ieee80211_regdomain *regd;
 853         u32 max_bandwidth = 0;
 854
 855         regd = custom_regd ? custom_regd : cfg80211_regdomain;
 856
 857         /*
 858          * Follow the driver's regulatory domain, if present, unless a country
 859          * IE has been processed or a user wants to help complaince further
 860          */
 861         if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
 862             last_request->initiator != NL80211_REGDOM_SET_BY_USER &&
 863             wiphy->regd)
 864                 regd = wiphy->regd;
 865
 866         if (!regd)
 867                 return -EINVAL;
 868
 869         for (i = 0; i < regd->n_reg_rules; i++) {
 870                 const struct ieee80211_reg_rule *rr;
 871                 const struct ieee80211_freq_range *fr = NULL;
 872                 const struct ieee80211_power_rule *pr = NULL;
 873
 874                 rr = &regd->reg_rules[i];
 875                 fr = &rr->freq_range;
 876                 pr = &rr->power_rule;
 877
 878                 /*
 879                  * We only need to know if one frequency rule was
 880                  * was in center_freq's band, that's enough, so lets
 881                  * not overwrite it once found
 882                  */
 883                 if (!band_rule_found)
 884                         band_rule_found = freq_in_rule_band(fr, center_freq);
 885
 886                 max_bandwidth = freq_max_bandwidth(fr, center_freq);
 887
 888                 if (max_bandwidth && *bandwidth <= max_bandwidth) {
 889                         *reg_rule = rr;
 890                         *bandwidth = max_bandwidth;
 891                         break;
 892                 }
 893         }
 894
 895         if (!band_rule_found)
 896                 return -ERANGE;
 897
 898         return !max_bandwidth;
 899 }
 900 EXPORT_SYMBOL(freq_reg_info);
 901
 902 int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
 903                          const struct ieee80211_reg_rule **reg_rule)
 904 {
 905         return freq_reg_info_regd(wiphy, center_freq,
 906                 bandwidth, reg_rule, NULL);
 907 }
 908
 909 static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 910                            unsigned int chan_idx)
 911 {
 912         int r;
 913         u32 flags;
 914         u32 max_bandwidth = 0;
 915         const struct ieee80211_reg_rule *reg_rule = NULL;
 916         const struct ieee80211_power_rule *power_rule = NULL;
 917         struct ieee80211_supported_band *sband;
 918         struct ieee80211_channel *chan;
 919         struct wiphy *request_wiphy = NULL;
 920
 921         assert_cfg80211_lock();
 922
 923         request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
 924
 925         sband = wiphy->bands[band];
 926         BUG_ON(chan_idx >= sband->n_channels);
 927         chan = &sband->channels[chan_idx];
 928
 929         flags = chan->orig_flags;
 930
 931         r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
 932                 &max_bandwidth, &reg_rule);
 933
 934         if (r) {
 935                 /*
 936                  * This means no regulatory rule was found in the country IE
 937                  * with a frequency range on the center_freq's band, since
 938                  * IEEE-802.11 allows for a country IE to have a subset of the
 939                  * regulatory information provided in a country we ignore
 940                  * disabling the channel unless at least one reg rule was
 941                  * found on the center_freq's band. For details see this
 942                  * clarification:
 943                  *
 944                  * http://tinyurl.com/11d-clarification
 945                  */
 946                 if (r == -ERANGE &&
 947                     last_request->initiator ==
 948                     NL80211_REGDOM_SET_BY_COUNTRY_IE) {
 949 #ifdef CONFIG_CFG80211_REG_DEBUG
 950                         printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
 951                                 "intact on %s - no rule found in band on "
 952                                 "Country IE\n",
 953                                 chan->center_freq, wiphy_name(wiphy));
 954 #endif
 955                 } else {
 956                 /*
 957                  * In this case we know the country IE has at least one reg rule
 958                  * for the band so we respect its band definitions
 959                  */
 960 #ifdef CONFIG_CFG80211_REG_DEBUG
 961                         if (last_request->initiator ==
 962                             NL80211_REGDOM_SET_BY_COUNTRY_IE)
 963                                 printk(KERN_DEBUG "cfg80211: Disabling "
 964                                         "channel %d MHz on %s due to "
 965                                         "Country IE\n",
 966                                         chan->center_freq, wiphy_name(wiphy));
 967 #endif
 968                         flags |= IEEE80211_CHAN_DISABLED;
 969                         chan->flags = flags;
 970                 }
 971                 return;
 972         }
 973
 974         power_rule = &reg_rule->power_rule;
 975
 976         if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
 977             request_wiphy && request_wiphy == wiphy &&
 978             request_wiphy->strict_regulatory) {
 979                 /*
 980                  * This gaurantees the driver's requested regulatory domain
 981                  * will always be used as a base for further regulatory
 982                  * settings
 983                  */
 984                 chan->flags = chan->orig_flags =
 985                         map_regdom_flags(reg_rule->flags);
 986                 chan->max_antenna_gain = chan->orig_mag =
 987                         (int) MBI_TO_DBI(power_rule->max_antenna_gain);
 988                 chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
 989                 chan->max_power = chan->orig_mpwr =
 990                         (int) MBM_TO_DBM(power_rule->max_eirp);
 991                 return;
 992         }
 993
 994         chan->flags = flags | map_regdom_flags(reg_rule->flags);
 995         chan->max_antenna_gain = min(chan->orig_mag,
 996                 (int) MBI_TO_DBI(power_rule->max_antenna_gain));
 997         chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
 998         if (chan->orig_mpwr)
 999                 chan->max_power = min(chan->orig_mpwr,
1000                         (int) MBM_TO_DBM(power_rule->max_eirp));
1001         else
1002                 chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
1003 }
1004
1005 static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
1006 {
1007         unsigned int i;
1008         struct ieee80211_supported_band *sband;
1009
1010         BUG_ON(!wiphy->bands[band]);
1011         sband = wiphy->bands[band];
1012
1013         for (i = 0; i < sband->n_channels; i++)
1014                 handle_channel(wiphy, band, i);
1015 }
1016
1017 static bool ignore_reg_update(struct wiphy *wiphy,
1018                               enum nl80211_reg_initiator initiator)
1019 {
1020         if (!last_request)
1021                 return true;
1022         if (initiator == NL80211_REGDOM_SET_BY_CORE &&
1023                   wiphy->custom_regulatory)
1024                 return true;
1025         /*
1026          * wiphy->regd will be set once the device has its own
1027          * desired regulatory domain set
1028          */
1029         if (wiphy->strict_regulatory && !wiphy->regd &&
1030             !is_world_regdom(last_request->alpha2))
1031                 return true;
1032         return false;
1033 }
1034
1035 static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator)
1036 {
1037         struct cfg80211_registered_device *drv;
1038
1039         list_for_each_entry(drv, &cfg80211_drv_list, list)
1040                 wiphy_update_regulatory(&drv->wiphy, initiator);
1041 }
1042
1043 static void handle_reg_beacon(struct wiphy *wiphy,
1044                               unsigned int chan_idx,
1045                               struct reg_beacon *reg_beacon)
1046 {
1047 #ifdef CONFIG_CFG80211_REG_DEBUG
1048 #define REG_DEBUG_BEACON_FLAG(desc) \
1049         printk(KERN_DEBUG "cfg80211: Enabling " desc " on " \
1050                 "frequency: %d MHz (Ch %d) on %s\n", \
1051                 reg_beacon->chan.center_freq, \
1052                 ieee80211_frequency_to_channel(reg_beacon->chan.center_freq), \
1053                 wiphy_name(wiphy));
1054 #else
1055 #define REG_DEBUG_BEACON_FLAG(desc) do {} while (0)
1056 #endif
1057         struct ieee80211_supported_band *sband;
1058         struct ieee80211_channel *chan;
1059
1060         assert_cfg80211_lock();
1061
1062         sband = wiphy->bands[reg_beacon->chan.band];
1063         chan = &sband->channels[chan_idx];
1064
1065         if (likely(chan->center_freq != reg_beacon->chan.center_freq))
1066                 return;
1067
1068         if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
1069                 chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
1070                 REG_DEBUG_BEACON_FLAG("active scanning");
1071         }
1072
1073         if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
1074                 chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
1075                 REG_DEBUG_BEACON_FLAG("beaconing");
1076         }
1077
1078         chan->beacon_found = true;
1079 #undef REG_DEBUG_BEACON_FLAG
1080 }
1081
1082 /*
1083  * Called when a scan on a wiphy finds a beacon on
1084  * new channel
1085  */
1086 static void wiphy_update_new_beacon(struct wiphy *wiphy,
1087                                     struct reg_beacon *reg_beacon)
1088 {
1089         unsigned int i;
1090         struct ieee80211_supported_band *sband;
1091
1092         assert_cfg80211_lock();
1093
1094         if (!wiphy->bands[reg_beacon->chan.band])
1095                 return;
1096
1097         sband = wiphy->bands[reg_beacon->chan.band];
1098
1099         for (i = 0; i < sband->n_channels; i++)
1100                 handle_reg_beacon(wiphy, i, reg_beacon);
1101 }
1102
1103 /*
1104  * Called upon reg changes or a new wiphy is added
1105  */
1106 static void wiphy_update_beacon_reg(struct wiphy *wiphy)
1107 {
1108         unsigned int i;
1109         struct ieee80211_supported_band *sband;
1110         struct reg_beacon *reg_beacon;
1111
1112         assert_cfg80211_lock();
1113
1114         if (list_empty(&reg_beacon_list))
1115                 return;
1116
1117         list_for_each_entry(reg_beacon, &reg_beacon_list, list) {
1118                 if (!wiphy->bands[reg_beacon->chan.band])
1119                         continue;
1120                 sband = wiphy->bands[reg_beacon->chan.band];
1121                 for (i = 0; i < sband->n_channels; i++)
1122                         handle_reg_beacon(wiphy, i, reg_beacon);
1123         }
1124 }
1125
1126 static bool reg_is_world_roaming(struct wiphy *wiphy)
1127 {
1128         if (is_world_regdom(cfg80211_regdomain->alpha2) ||
1129             (wiphy->regd && is_world_regdom(wiphy->regd->alpha2)))
1130                 return true;
1131         if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
1132             wiphy->custom_regulatory)
1133                 return true;
1134         return false;
1135 }
1136
1137 /* Reap the advantages of previously found beacons */
1138 static void reg_process_beacons(struct wiphy *wiphy)
1139 {
1140         if (!reg_is_world_roaming(wiphy))
1141                 return;
1142         wiphy_update_beacon_reg(wiphy);
1143 }
1144
1145 void wiphy_update_regulatory(struct wiphy *wiphy,
1146                              enum nl80211_reg_initiator initiator)
1147 {
1148         enum ieee80211_band band;
1149
1150         if (ignore_reg_update(wiphy, initiator))
1151                 goto out;
1152         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
1153                 if (wiphy->bands[band])
1154                         handle_band(wiphy, band);
1155         }
1156 out:
1157         reg_process_beacons(wiphy);
1158         if (wiphy->reg_notifier)
1159                 wiphy->reg_notifier(wiphy, last_request);
1160 }
1161
1162 static void handle_channel_custom(struct wiphy *wiphy,
1163                                   enum ieee80211_band band,
1164                                   unsigned int chan_idx,
1165                                   const struct ieee80211_regdomain *regd)
1166 {
1167         int r;
1168         u32 max_bandwidth = 0;
1169         const struct ieee80211_reg_rule *reg_rule = NULL;
1170         const struct ieee80211_power_rule *power_rule = NULL;
1171         struct ieee80211_supported_band *sband;
1172         struct ieee80211_channel *chan;
1173
1174         sband = wiphy->bands[band];
1175         BUG_ON(chan_idx >= sband->n_channels);
1176         chan = &sband->channels[chan_idx];
1177
1178         r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq),
1179                 &max_bandwidth, &reg_rule, regd);
1180
1181         if (r) {
1182                 chan->flags = IEEE80211_CHAN_DISABLED;
1183                 return;
1184         }
1185
1186         power_rule = &reg_rule->power_rule;
1187
1188         chan->flags |= map_regdom_flags(reg_rule->flags);
1189         chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
1190         chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
1191         chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
1192 }
1193
1194 static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band,
1195                                const struct ieee80211_regdomain *regd)
1196 {
1197         unsigned int i;
1198         struct ieee80211_supported_band *sband;
1199
1200         BUG_ON(!wiphy->bands[band]);
1201         sband = wiphy->bands[band];
1202
1203         for (i = 0; i < sband->n_channels; i++)
1204                 handle_channel_custom(wiphy, band, i, regd);
1205 }
1206
1207 /* Used by drivers prior to wiphy registration */
1208 void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
1209                                    const struct ieee80211_regdomain *regd)
1210 {
1211         enum ieee80211_band band;
1212         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
1213                 if (wiphy->bands[band])
1214                         handle_band_custom(wiphy, band, regd);
1215         }
1216 }
1217 EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
1218
1219 static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd,
1220                          const struct ieee80211_regdomain *src_regd)
1221 {
1222         struct ieee80211_regdomain *regd;
1223         int size_of_regd = 0;
1224         unsigned int i;
1225
1226         size_of_regd = sizeof(struct ieee80211_regdomain) +
1227           ((src_regd->n_reg_rules + 1) * sizeof(struct ieee80211_reg_rule));
1228
1229         regd = kzalloc(size_of_regd, GFP_KERNEL);
1230         if (!regd)
1231                 return -ENOMEM;
1232
1233         memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain));
1234
1235         for (i = 0; i < src_regd->n_reg_rules; i++)
1236                 memcpy(&regd->reg_rules[i], &src_regd->reg_rules[i],
1237                         sizeof(struct ieee80211_reg_rule));
1238
1239         *dst_regd = regd;
1240         return 0;
1241 }
1242
1243 /*
1244  * Return value which can be used by ignore_request() to indicate
1245  * it has been determined we should intersect two regulatory domains
1246  */
1247 #define REG_INTERSECT   1
1248
1249 /* This has the logic which determines when a new request
1250  * should be ignored. */
1251 static int ignore_request(struct wiphy *wiphy,
1252                           struct regulatory_request *pending_request)
1253 {
1254         struct wiphy *last_wiphy = NULL;
1255
1256         assert_cfg80211_lock();
1257
1258         /* All initial requests are respected */
1259         if (!last_request)
1260                 return 0;
1261
1262         switch (pending_request->initiator) {
1263         case NL80211_REGDOM_SET_BY_CORE:
1264                 return -EINVAL;
1265         case NL80211_REGDOM_SET_BY_COUNTRY_IE:
1266
1267                 last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
1268
1269                 if (unlikely(!is_an_alpha2(pending_request->alpha2)))
1270                         return -EINVAL;
1271                 if (last_request->initiator ==
1272                     NL80211_REGDOM_SET_BY_COUNTRY_IE) {
1273                         if (last_wiphy != wiphy) {
1274                                 /*
1275                                  * Two cards with two APs claiming different
1276                                  * different Country IE alpha2s. We could
1277                                  * intersect them, but that seems unlikely
1278                                  * to be correct. Reject second one for now.
1279                                  */
1280                                 if (regdom_changes(pending_request->alpha2))
1281                                         return -EOPNOTSUPP;
1282                                 return -EALREADY;
1283                         }
1284                         /*
1285                          * Two consecutive Country IE hints on the same wiphy.
1286                          * This should be picked up early by the driver/stack
1287                          */
1288                         if (WARN_ON(regdom_changes(pending_request->alpha2)))
1289                                 return 0;
1290                         return -EALREADY;
1291                 }
1292                 return REG_INTERSECT;
1293         case NL80211_REGDOM_SET_BY_DRIVER:
1294                 if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) {
1295                         if (is_old_static_regdom(cfg80211_regdomain))
1296                                 return 0;
1297                         if (regdom_changes(pending_request->alpha2))
1298                                 return 0;
1299                         return -EALREADY;
1300                 }
1301
1302                 /*
1303                  * This would happen if you unplug and plug your card
1304                  * back in or if you add a new device for which the previously
1305                  * loaded card also agrees on the regulatory domain.
1306                  */
1307                 if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
1308                     !regdom_changes(pending_request->alpha2))
1309                         return -EALREADY;
1310
1311                 return REG_INTERSECT;
1312         case NL80211_REGDOM_SET_BY_USER:
1313                 if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
1314                         return REG_INTERSECT;
1315                 /*
1316                  * If the user knows better the user should set the regdom
1317                  * to their country before the IE is picked up
1318                  */
1319                 if (last_request->initiator == NL80211_REGDOM_SET_BY_USER &&
1320                           last_request->intersect)
1321                         return -EOPNOTSUPP;
1322                 /*
1323                  * Process user requests only after previous user/driver/core
1324                  * requests have been processed
1325                  */
1326                 if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE ||
1327                     last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER ||
1328                     last_request->initiator == NL80211_REGDOM_SET_BY_USER) {
1329                         if (regdom_changes(last_request->alpha2))
1330                                 return -EAGAIN;
1331                 }
1332
1333                 if (!is_old_static_regdom(cfg80211_regdomain) &&
1334                     !regdom_changes(pending_request->alpha2))
1335                         return -EALREADY;
1336
1337                 return 0;
1338         }
1339
1340         return -EINVAL;
1341 }
1342
1343 /**
1344  * __regulatory_hint - hint to the wireless core a regulatory domain
1345  * @wiphy: if the hint comes from country information from an AP, this
1346  *      is required to be set to the wiphy that received the information
1347  * @pending_request: the regulatory request currently being processed
1348  *
1349  * The Wireless subsystem can use this function to hint to the wireless core
1350  * what it believes should be the current regulatory domain.
1351  *
1352  * Returns zero if all went fine, %-EALREADY if a regulatory domain had
1353  * already been set or other standard error codes.
1354  *
1355  * Caller must hold &cfg80211_mutex
1356  */
1357 static int __regulatory_hint(struct wiphy *wiphy,
1358                              struct regulatory_request *pending_request)
1359 {
1360         bool intersect = false;
1361         int r = 0;
1362
1363         assert_cfg80211_lock();
1364
1365         r = ignore_request(wiphy, pending_request);
1366
1367         if (r == REG_INTERSECT) {
1368                 if (pending_request->initiator ==
1369                     NL80211_REGDOM_SET_BY_DRIVER) {
1370                         r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain);
1371                         if (r) {
1372                                 kfree(pending_request);
1373                                 return r;
1374                         }
1375                 }
1376                 intersect = true;
1377         } else if (r) {
1378                 /*
1379                  * If the regulatory domain being requested by the
1380                  * driver has already been set just copy it to the
1381                  * wiphy
1382                  */
1383                 if (r == -EALREADY &&
1384                     pending_request->initiator ==
1385                     NL80211_REGDOM_SET_BY_DRIVER) {
1386                         r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain);
1387                         if (r) {
1388                                 kfree(pending_request);
1389                                 return r;
1390                         }
1391                         r = -EALREADY;
1392                         goto new_request;
1393                 }
1394                 kfree(pending_request);
1395                 return r;
1396         }
1397
1398 new_request:
1399         kfree(last_request);
1400
1401         last_request = pending_request;
1402         last_request->intersect = intersect;
1403
1404         pending_request = NULL;
1405
1406         /* When r == REG_INTERSECT we do need to call CRDA */
1407         if (r < 0) {
1408                 /*
1409                  * Since CRDA will not be called in this case as we already
1410                  * have applied the requested regulatory domain before we just
1411                  * inform userspace we have processed the request
1412                  */
1413                 if (r == -EALREADY)
1414                         nl80211_send_reg_change_event(last_request);
1415                 return r;
1416         }
1417
1418         /*
1419          * Note: When CONFIG_WIRELESS_OLD_REGULATORY is enabled
1420          * AND if CRDA is NOT present nothing will happen, if someone
1421          * wants to bother with 11d with OLD_REG you can add a timer.
1422          * If after x amount of time nothing happens you can call:
1423          *
1424          * return set_regdom(country_ie_regdomain);
1425          *
1426          * to intersect with the static rd
1427          */
1428         return call_crda(last_request->alpha2);
1429 }
1430
1431 /* This currently only processes user and driver regulatory hints */
1432 static void reg_process_hint(struct regulatory_request *reg_request)
1433 {
1434         int r = 0;
1435         struct wiphy *wiphy = NULL;
1436
1437         BUG_ON(!reg_request->alpha2);
1438
1439         mutex_lock(&cfg80211_mutex);
1440
1441         if (wiphy_idx_valid(reg_request->wiphy_idx))
1442                 wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx);
1443
1444         if (reg_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
1445             !wiphy) {
1446                 kfree(reg_request);
1447                 goto out;
1448         }
1449
1450         r = __regulatory_hint(wiphy, reg_request);
1451         /* This is required so that the orig_* parameters are saved */
1452         if (r == -EALREADY && wiphy && wiphy->strict_regulatory)
1453                 wiphy_update_regulatory(wiphy, reg_request->initiator);
1454 out:
1455         mutex_unlock(&cfg80211_mutex);
1456 }
1457
1458 /* Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* */
1459 static void reg_process_pending_hints(void)
1460         {
1461         struct regulatory_request *reg_request;
1462
1463         spin_lock(&reg_requests_lock);
1464         while (!list_empty(&reg_requests_list)) {
1465                 reg_request = list_first_entry(&reg_requests_list,
1466                                                struct regulatory_request,
1467                                                list);
1468                 list_del_init(&reg_request->list);
1469
1470                 spin_unlock(&reg_requests_lock);
1471                 reg_process_hint(reg_request);
1472                 spin_lock(&reg_requests_lock);
1473         }
1474         spin_unlock(&reg_requests_lock);
1475 }
1476
1477 /* Processes beacon hints -- this has nothing to do with country IEs */
1478 static void reg_process_pending_beacon_hints(void)
1479 {
1480         struct cfg80211_registered_device *drv;
1481         struct reg_beacon *pending_beacon, *tmp;
1482
1483         mutex_lock(&cfg80211_mutex);
1484
1485         /* This goes through the _pending_ beacon list */
1486         spin_lock_bh(&reg_pending_beacons_lock);
1487
1488         if (list_empty(&reg_pending_beacons)) {
1489                 spin_unlock_bh(&reg_pending_beacons_lock);
1490                 goto out;
1491         }
1492
1493         list_for_each_entry_safe(pending_beacon, tmp,
1494                                  &reg_pending_beacons, list) {
1495
1496                 list_del_init(&pending_beacon->list);
1497
1498                 /* Applies the beacon hint to current wiphys */
1499                 list_for_each_entry(drv, &cfg80211_drv_list, list)
1500                         wiphy_update_new_beacon(&drv->wiphy, pending_beacon);
1501
1502                 /* Remembers the beacon hint for new wiphys or reg changes */
1503                 list_add_tail(&pending_beacon->list, &reg_beacon_list);
1504         }
1505
1506         spin_unlock_bh(&reg_pending_beacons_lock);
1507 out:
1508         mutex_unlock(&cfg80211_mutex);
1509 }
1510
1511 static void reg_todo(struct work_struct *work)
1512 {
1513         reg_process_pending_hints();
1514         reg_process_pending_beacon_hints();
1515 }
1516
1517 static DECLARE_WORK(reg_work, reg_todo);
1518
1519 static void queue_regulatory_request(struct regulatory_request *request)
1520 {
1521         spin_lock(&reg_requests_lock);
1522         list_add_tail(&request->list, &reg_requests_list);
1523         spin_unlock(&reg_requests_lock);
1524
1525         schedule_work(&reg_work);
1526 }
1527
1528 /* Core regulatory hint -- happens once during cfg80211_init() */
1529 static int regulatory_hint_core(const char *alpha2)
1530 {
1531         struct regulatory_request *request;
1532
1533         BUG_ON(last_request);
1534
1535         request = kzalloc(sizeof(struct regulatory_request),
1536                           GFP_KERNEL);
1537         if (!request)
1538                 return -ENOMEM;
1539
1540         request->alpha2[0] = alpha2[0];
1541         request->alpha2[1] = alpha2[1];
1542         request->initiator = NL80211_REGDOM_SET_BY_CORE;
1543
1544         queue_regulatory_request(request);
1545
1546         return 0;
1547 }
1548
1549 /* User hints */
1550 int regulatory_hint_user(const char *alpha2)
1551 {
1552         struct regulatory_request *request;
1553
1554         BUG_ON(!alpha2);
1555
1556         request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
1557         if (!request)
1558                 return -ENOMEM;
1559
1560         request->wiphy_idx = WIPHY_IDX_STALE;
1561         request->alpha2[0] = alpha2[0];
1562         request->alpha2[1] = alpha2[1];
1563         request->initiator = NL80211_REGDOM_SET_BY_USER,
1564
1565         queue_regulatory_request(request);
1566
1567         return 0;
1568 }
1569
1570 /* Driver hints */
1571 int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
1572 {
1573         struct regulatory_request *request;
1574
1575         BUG_ON(!alpha2);
1576         BUG_ON(!wiphy);
1577
1578         request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
1579         if (!request)
1580                 return -ENOMEM;
1581
1582         request->wiphy_idx = get_wiphy_idx(wiphy);
1583
1584         /* Must have registered wiphy first */
1585         BUG_ON(!wiphy_idx_valid(request->wiphy_idx));
1586
1587         request->alpha2[0] = alpha2[0];
1588         request->alpha2[1] = alpha2[1];
1589         request->initiator = NL80211_REGDOM_SET_BY_DRIVER;
1590
1591         queue_regulatory_request(request);
1592
1593         return 0;
1594 }
1595 EXPORT_SYMBOL(regulatory_hint);
1596
1597 static bool reg_same_country_ie_hint(struct wiphy *wiphy,
1598                         u32 country_ie_checksum)
1599 {
1600         struct wiphy *request_wiphy;
1601
1602         assert_cfg80211_lock();
1603
1604         request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
1605
1606         if (!request_wiphy)
1607                 return false;
1608
1609         if (likely(request_wiphy != wiphy))
1610                 return !country_ie_integrity_changes(country_ie_checksum);
1611         /*
1612          * We should not have let these through at this point, they
1613          * should have been picked up earlier by the first alpha2 check
1614          * on the device
1615          */
1616         if (WARN_ON(!country_ie_integrity_changes(country_ie_checksum)))
1617                 return true;
1618         return false;
1619 }
1620
1621 void regulatory_hint_11d(struct wiphy *wiphy,
1622                         u8 *country_ie,
1623                         u8 country_ie_len)
1624 {
1625         struct ieee80211_regdomain *rd = NULL;
1626         char alpha2[2];
1627         u32 checksum = 0;
1628         enum environment_cap env = ENVIRON_ANY;
1629         struct regulatory_request *request;
1630
1631         mutex_lock(&cfg80211_mutex);
1632
1633         if (unlikely(!last_request)) {
1634                 mutex_unlock(&cfg80211_mutex);
1635                 return;
1636         }
1637
1638         /* IE len must be evenly divisible by 2 */
1639         if (country_ie_len & 0x01)
1640                 goto out;
1641
1642         if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1643                 goto out;
1644
1645         /*
1646          * Pending country IE processing, this can happen after we
1647          * call CRDA and wait for a response if a beacon was received before
1648          * we were able to process the last regulatory_hint_11d() call
1649          */
1650         if (country_ie_regdomain)
1651                 goto out;
1652
1653         alpha2[0] = country_ie[0];
1654         alpha2[1] = country_ie[1];
1655
1656         if (country_ie[2] == 'I')
1657                 env = ENVIRON_INDOOR;
1658         else if (country_ie[2] == 'O')
1659                 env = ENVIRON_OUTDOOR;
1660
1661         /*
1662          * We will run this for *every* beacon processed for the BSSID, so
1663          * we optimize an early check to exit out early if we don't have to
1664          * do anything
1665          */
1666         if (likely(wiphy_idx_valid(last_request->wiphy_idx))) {
1667                 struct cfg80211_registered_device *drv_last_ie;
1668
1669                 drv_last_ie =
1670                         cfg80211_drv_by_wiphy_idx(last_request->wiphy_idx);
1671
1672                 /*
1673                  * Lets keep this simple -- we trust the first AP
1674                  * after we intersect with CRDA
1675                  */
1676                 if (likely(&drv_last_ie->wiphy == wiphy)) {
1677                         /*
1678                          * Ignore IEs coming in on this wiphy with
1679                          * the same alpha2 and environment cap
1680                          */
1681                         if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2,
1682                                   alpha2) &&
1683                                   env == drv_last_ie->env)) {
1684                                 goto out;
1685                         }
1686                         /*
1687                          * the wiphy moved on to another BSSID or the AP
1688                          * was reconfigured. XXX: We need to deal with the
1689                          * case where the user suspends and goes to goes
1690                          * to another country, and then gets IEs from an
1691                          * AP with different settings
1692                          */
1693                         goto out;
1694                 } else {
1695                         /*
1696                          * Ignore IEs coming in on two separate wiphys with
1697                          * the same alpha2 and environment cap
1698                          */
1699                         if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2,
1700                                   alpha2) &&
1701                                   env == drv_last_ie->env)) {
1702                                 goto out;
1703                         }
1704                         /* We could potentially intersect though */
1705                         goto out;
1706                 }
1707         }
1708
1709         rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
1710         if (!rd)
1711                 goto out;
1712
1713         /*
1714          * This will not happen right now but we leave it here for the
1715          * the future when we want to add suspend/resume support and having
1716          * the user move to another country after doing so, or having the user
1717          * move to another AP. Right now we just trust the first AP.
1718          *
1719          * If we hit this before we add this support we want to be informed of
1720          * it as it would indicate a mistake in the current design
1721          */
1722         if (WARN_ON(reg_same_country_ie_hint(wiphy, checksum)))
1723                 goto free_rd_out;
1724
1725         request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
1726         if (!request)
1727                 goto free_rd_out;
1728
1729         /*
1730          * We keep this around for when CRDA comes back with a response so
1731          * we can intersect with that
1732          */
1733         country_ie_regdomain = rd;
1734
1735         request->wiphy_idx = get_wiphy_idx(wiphy);
1736         request->alpha2[0] = rd->alpha2[0];
1737         request->alpha2[1] = rd->alpha2[1];
1738         request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE;
1739         request->country_ie_checksum = checksum;
1740         request->country_ie_env = env;
1741
1742         mutex_unlock(&cfg80211_mutex);
1743
1744         queue_regulatory_request(request);
1745
1746         return;
1747
1748 free_rd_out:
1749         kfree(rd);
1750 out:
1751         mutex_unlock(&cfg80211_mutex);
1752 }
1753 EXPORT_SYMBOL(regulatory_hint_11d);
1754
1755 static bool freq_is_chan_12_13_14(u16 freq)
1756 {
1757         if (freq == ieee80211_channel_to_frequency(12) ||
1758             freq == ieee80211_channel_to_frequency(13) ||
1759             freq == ieee80211_channel_to_frequency(14))
1760                 return true;
1761         return false;
1762 }
1763
1764 int regulatory_hint_found_beacon(struct wiphy *wiphy,
1765                                  struct ieee80211_channel *beacon_chan,
1766                                  gfp_t gfp)
1767 {
1768         struct reg_beacon *reg_beacon;
1769
1770         if (likely((beacon_chan->beacon_found ||
1771             (beacon_chan->flags & IEEE80211_CHAN_RADAR) ||
1772             (beacon_chan->band == IEEE80211_BAND_2GHZ &&
1773              !freq_is_chan_12_13_14(beacon_chan->center_freq)))))
1774                 return 0;
1775
1776         reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp);
1777         if (!reg_beacon)
1778                 return -ENOMEM;
1779
1780 #ifdef CONFIG_CFG80211_REG_DEBUG
1781         printk(KERN_DEBUG "cfg80211: Found new beacon on "
1782                 "frequency: %d MHz (Ch %d) on %s\n",
1783                 beacon_chan->center_freq,
1784                 ieee80211_frequency_to_channel(beacon_chan->center_freq),
1785                 wiphy_name(wiphy));
1786 #endif
1787         memcpy(&reg_beacon->chan, beacon_chan,
1788                 sizeof(struct ieee80211_channel));
1789
1790
1791         /*
1792          * Since we can be called from BH or and non-BH context
1793          * we must use spin_lock_bh()
1794          */
1795         spin_lock_bh(&reg_pending_beacons_lock);
1796         list_add_tail(&reg_beacon->list, &reg_pending_beacons);
1797         spin_unlock_bh(&reg_pending_beacons_lock);
1798
1799         schedule_work(&reg_work);
1800
1801         return 0;
1802 }
1803
1804 static void print_rd_rules(const struct ieee80211_regdomain *rd)
1805 {
1806         unsigned int i;
1807         const struct ieee80211_reg_rule *reg_rule = NULL;
1808         const struct ieee80211_freq_range *freq_range = NULL;
1809         const struct ieee80211_power_rule *power_rule = NULL;
1810
1811         printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), "
1812                 "(max_antenna_gain, max_eirp)\n");
1813
1814         for (i = 0; i < rd->n_reg_rules; i++) {
1815                 reg_rule = &rd->reg_rules[i];
1816                 freq_range = &reg_rule->freq_range;
1817                 power_rule = &reg_rule->power_rule;
1818
1819                 /*
1820                  * There may not be documentation for max antenna gain
1821                  * in certain regions
1822                  */
1823                 if (power_rule->max_antenna_gain)
1824                         printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
1825                                 "(%d mBi, %d mBm)\n",
1826                                 freq_range->start_freq_khz,
1827                                 freq_range->end_freq_khz,
1828                                 freq_range->max_bandwidth_khz,
1829                                 power_rule->max_antenna_gain,
1830                                 power_rule->max_eirp);
1831                 else
1832                         printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
1833                                 "(N/A, %d mBm)\n",
1834                                 freq_range->start_freq_khz,
1835                                 freq_range->end_freq_khz,
1836                                 freq_range->max_bandwidth_khz,
1837                                 power_rule->max_eirp);
1838         }
1839 }
1840
1841 static void print_regdomain(const struct ieee80211_regdomain *rd)
1842 {
1843
1844         if (is_intersected_alpha2(rd->alpha2)) {
1845
1846                 if (last_request->initiator ==
1847                     NL80211_REGDOM_SET_BY_COUNTRY_IE) {
1848                         struct cfg80211_registered_device *drv;
1849                         drv = cfg80211_drv_by_wiphy_idx(
1850                                 last_request->wiphy_idx);
1851                         if (drv) {
1852                                 printk(KERN_INFO "cfg80211: Current regulatory "
1853                                         "domain updated by AP to: %c%c\n",
1854                                         drv->country_ie_alpha2[0],
1855                                         drv->country_ie_alpha2[1]);
1856                         } else
1857                                 printk(KERN_INFO "cfg80211: Current regulatory "
1858                                         "domain intersected: \n");
1859                 } else
1860                                 printk(KERN_INFO "cfg80211: Current regulatory "
1861                                         "domain intersected: \n");
1862         } else if (is_world_regdom(rd->alpha2))
1863                 printk(KERN_INFO "cfg80211: World regulatory "
1864                         "domain updated:\n");
1865         else {
1866                 if (is_unknown_alpha2(rd->alpha2))
1867                         printk(KERN_INFO "cfg80211: Regulatory domain "
1868                                 "changed to driver built-in settings "
1869                                 "(unknown country)\n");
1870                 else
1871                         printk(KERN_INFO "cfg80211: Regulatory domain "
1872                                 "changed to country: %c%c\n",
1873                                 rd->alpha2[0], rd->alpha2[1]);
1874         }
1875         print_rd_rules(rd);
1876 }
1877
1878 static void print_regdomain_info(const struct ieee80211_regdomain *rd)
1879 {
1880         printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n",
1881                 rd->alpha2[0], rd->alpha2[1]);
1882         print_rd_rules(rd);
1883 }
1884
1885 #ifdef CONFIG_CFG80211_REG_DEBUG
1886 static void reg_country_ie_process_debug(
1887         const struct ieee80211_regdomain *rd,
1888         const struct ieee80211_regdomain *country_ie_regdomain,
1889         const struct ieee80211_regdomain *intersected_rd)
1890 {
1891         printk(KERN_DEBUG "cfg80211: Received country IE:\n");
1892         print_regdomain_info(country_ie_regdomain);
1893         printk(KERN_DEBUG "cfg80211: CRDA thinks this should applied:\n");
1894         print_regdomain_info(rd);
1895         if (intersected_rd) {
1896                 printk(KERN_DEBUG "cfg80211: We intersect both of these "
1897                         "and get:\n");
1898                 print_regdomain_info(intersected_rd);
1899                 return;
1900         }
1901         printk(KERN_DEBUG "cfg80211: Intersection between both failed\n");
1902 }
1903 #else
1904 static inline void reg_country_ie_process_debug(
1905         const struct ieee80211_regdomain *rd,
1906         const struct ieee80211_regdomain *country_ie_regdomain,
1907         const struct ieee80211_regdomain *intersected_rd)
1908 {
1909 }
1910 #endif
1911
1912 /* Takes ownership of rd only if it doesn't fail */
1913 static int __set_regdom(const struct ieee80211_regdomain *rd)
1914 {
1915         const struct ieee80211_regdomain *intersected_rd = NULL;
1916         struct cfg80211_registered_device *drv = NULL;
1917         struct wiphy *request_wiphy;
1918         /* Some basic sanity checks first */
1919
1920         if (is_world_regdom(rd->alpha2)) {
1921                 if (WARN_ON(!reg_is_valid_request(rd->alpha2)))
1922                         return -EINVAL;
1923                 update_world_regdomain(rd);
1924                 return 0;
1925         }
1926
1927         if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) &&
1928                         !is_unknown_alpha2(rd->alpha2))
1929                 return -EINVAL;
1930
1931         if (!last_request)
1932                 return -EINVAL;
1933
1934         /*
1935          * Lets only bother proceeding on the same alpha2 if the current
1936          * rd is non static (it means CRDA was present and was used last)
1937          * and the pending request came in from a country IE
1938          */
1939         if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
1940                 /*
1941                  * If someone else asked us to change the rd lets only bother
1942                  * checking if the alpha2 changes if CRDA was already called
1943                  */
1944                 if (!is_old_static_regdom(cfg80211_regdomain) &&
1945                     !regdom_changes(rd->alpha2))
1946                         return -EINVAL;
1947         }
1948
1949         /*
1950          * Now lets set the regulatory domain, update all driver channels
1951          * and finally inform them of what we have done, in case they want
1952          * to review or adjust their own settings based on their own
1953          * internal EEPROM data
1954          */
1955
1956         if (WARN_ON(!reg_is_valid_request(rd->alpha2)))
1957                 return -EINVAL;
1958
1959         if (!is_valid_rd(rd)) {
1960                 printk(KERN_ERR "cfg80211: Invalid "
1961                         "regulatory domain detected:\n");
1962                 print_regdomain_info(rd);
1963                 return -EINVAL;
1964         }
1965
1966         request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
1967
1968         if (!last_request->intersect) {
1969                 int r;
1970
1971                 if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) {
1972                         reset_regdomains();
1973                         cfg80211_regdomain = rd;
1974                         return 0;
1975                 }
1976
1977                 /*
1978                  * For a driver hint, lets copy the regulatory domain the
1979                  * driver wanted to the wiphy to deal with conflicts
1980                  */
1981
1982                 BUG_ON(request_wiphy->regd);
1983
1984                 r = reg_copy_regd(&request_wiphy->regd, rd);
1985                 if (r)
1986                         return r;
1987
1988                 reset_regdomains();
1989                 cfg80211_regdomain = rd;
1990                 return 0;
1991         }
1992
1993         /* Intersection requires a bit more work */
1994
1995         if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
1996
1997                 intersected_rd = regdom_intersect(rd, cfg80211_regdomain);
1998                 if (!intersected_rd)
1999                         return -EINVAL;
2000
2001                 /*
2002                  * We can trash what CRDA provided now.
2003                  * However if a driver requested this specific regulatory
2004                  * domain we keep it for its private use
2005                  */
2006                 if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER)
2007                         request_wiphy->regd = rd;
2008                 else
2009                         kfree(rd);
2010
2011                 rd = NULL;
2012
2013                 reset_regdomains();
2014                 cfg80211_regdomain = intersected_rd;
2015
2016                 return 0;
2017         }
2018
2019         /*
2020          * Country IE requests are handled a bit differently, we intersect
2021          * the country IE rd with what CRDA believes that country should have
2022          */
2023
2024         BUG_ON(!country_ie_regdomain);
2025
2026         if (rd != country_ie_regdomain) {
2027                 /*
2028                  * Intersect what CRDA returned and our what we
2029                  * had built from the Country IE received
2030                  */
2031
2032                 intersected_rd = regdom_intersect(rd, country_ie_regdomain);
2033
2034                 reg_country_ie_process_debug(rd, country_ie_regdomain,
2035                         intersected_rd);
2036
2037                 kfree(country_ie_regdomain);
2038                 country_ie_regdomain = NULL;
2039         } else {
2040                 /*
2041                  * This would happen when CRDA was not present and
2042                  * OLD_REGULATORY was enabled. We intersect our Country
2043                  * IE rd and what was set on cfg80211 originally
2044                  */
2045                 intersected_rd = regdom_intersect(rd, cfg80211_regdomain);
2046         }
2047
2048         if (!intersected_rd)
2049                 return -EINVAL;
2050
2051         drv = wiphy_to_dev(request_wiphy);
2052
2053         drv->country_ie_alpha2[0] = rd->alpha2[0];
2054         drv->country_ie_alpha2[1] = rd->alpha2[1];
2055         drv->env = last_request->country_ie_env;
2056
2057         BUG_ON(intersected_rd == rd);
2058
2059         kfree(rd);
2060         rd = NULL;
2061
2062         reset_regdomains();
2063         cfg80211_regdomain = intersected_rd;
2064
2065         return 0;
2066 }
2067
2068
2069 /*
2070  * Use this call to set the current regulatory domain. Conflicts with
2071  * multiple drivers can be ironed out later. Caller must've already
2072  * kmalloc'd the rd structure. Caller must hold cfg80211_mutex
2073  */
2074 int set_regdom(const struct ieee80211_regdomain *rd)
2075 {
2076         int r;
2077
2078         assert_cfg80211_lock();
2079
2080         /* Note that this doesn't update the wiphys, this is done below */
2081         r = __set_regdom(rd);
2082         if (r) {
2083                 kfree(rd);
2084                 return r;
2085         }
2086
2087         /* This would make this whole thing pointless */
2088         if (!last_request->intersect)
2089                 BUG_ON(rd != cfg80211_regdomain);
2090
2091         /* update all wiphys now with the new established regulatory domain */
2092         update_all_wiphy_regulatory(last_request->initiator);
2093
2094         print_regdomain(cfg80211_regdomain);
2095
2096         nl80211_send_reg_change_event(last_request);
2097
2098         return r;
2099 }
2100
2101 /* Caller must hold cfg80211_mutex */
2102 void reg_device_remove(struct wiphy *wiphy)
2103 {
2104         struct wiphy *request_wiphy;
2105
2106         assert_cfg80211_lock();
2107
2108         request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
2109
2110         kfree(wiphy->regd);
2111         if (!last_request || !request_wiphy)
2112                 return;
2113         if (request_wiphy != wiphy)
2114                 return;
2115         last_request->wiphy_idx = WIPHY_IDX_STALE;
2116         last_request->country_ie_env = ENVIRON_ANY;
2117 }
2118
2119 int regulatory_init(void)
2120 {
2121         int err = 0;
2122
2123         reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0);
2124         if (IS_ERR(reg_pdev))
2125                 return PTR_ERR(reg_pdev);
2126
2127         spin_lock_init(&reg_requests_lock);
2128         spin_lock_init(&reg_pending_beacons_lock);
2129
2130 #ifdef CONFIG_WIRELESS_OLD_REGULATORY
2131         cfg80211_regdomain = static_regdom(ieee80211_regdom);
2132
2133         printk(KERN_INFO "cfg80211: Using static regulatory domain info\n");
2134         print_regdomain_info(cfg80211_regdomain);
2135         /*
2136          * The old code still requests for a new regdomain and if
2137          * you have CRDA you get it updated, otherwise you get
2138          * stuck with the static values. Since "EU" is not a valid
2139          * ISO / IEC 3166 alpha2 code we can't expect userpace to
2140          * give us a regulatory domain for it. We need last_request
2141          * iniitalized though so lets just send a request which we
2142          * know will be ignored... this crap will be removed once
2143          * OLD_REG dies.
2144          */
2145         err = regulatory_hint_core(ieee80211_regdom);
2146 #else
2147         cfg80211_regdomain = cfg80211_world_regdom;
2148
2149         err = regulatory_hint_core("00");
2150 #endif
2151         if (err) {
2152                 if (err == -ENOMEM)
2153                         return err;
2154                 /*
2155                  * N.B. kobject_uevent_env() can fail mainly for when we're out
2156                  * memory which is handled and propagated appropriately above
2157                  * but it can also fail during a netlink_broadcast() or during
2158                  * early boot for call_usermodehelper(). For now treat these
2159                  * errors as non-fatal.
2160                  */
2161                 printk(KERN_ERR "cfg80211: kobject_uevent_env() was unable "
2162                         "to call CRDA during init");
2163 #ifdef CONFIG_CFG80211_REG_DEBUG
2164                 /* We want to find out exactly why when debugging */
2165                 WARN_ON(err);
2166 #endif
2167         }
2168
2169         return 0;
2170 }
2171
2172 void regulatory_exit(void)
2173 {
2174         struct regulatory_request *reg_request, *tmp;
2175         struct reg_beacon *reg_beacon, *btmp;
2176
2177         cancel_work_sync(&reg_work);
2178
2179         mutex_lock(&cfg80211_mutex);
2180
2181         reset_regdomains();
2182
2183         kfree(country_ie_regdomain);
2184         country_ie_regdomain = NULL;
2185
2186         kfree(last_request);
2187
2188         platform_device_unregister(reg_pdev);
2189
2190         spin_lock_bh(&reg_pending_beacons_lock);
2191         if (!list_empty(&reg_pending_beacons)) {
2192                 list_for_each_entry_safe(reg_beacon, btmp,
2193                                          &reg_pending_beacons, list) {
2194                         list_del(&reg_beacon->list);
2195                         kfree(reg_beacon);
2196                 }
2197         }
2198         spin_unlock_bh(&reg_pending_beacons_lock);
2199
2200         if (!list_empty(&reg_beacon_list)) {
2201                 list_for_each_entry_safe(reg_beacon, btmp,
2202                                          &reg_beacon_list, list) {
2203                         list_del(&reg_beacon->list);
2204                         kfree(reg_beacon);
2205                 }
2206         }
2207
2208         spin_lock(&reg_requests_lock);
2209         if (!list_empty(&reg_requests_list)) {
2210                 list_for_each_entry_safe(reg_request, tmp,
2211                                          &reg_requests_list, list) {
2212                         list_del(&reg_request->list);
2213                         kfree(reg_request);
2214                 }
2215         }
2216         spin_unlock(&reg_requests_lock);
2217
2218         mutex_unlock(&cfg80211_mutex);
2219 }