net/mac80211/iface.c

   1 /*
   2  * Interface handling (except master interface)
   3  *
   4  * Copyright 2002-2005, Instant802 Networks, Inc.
   5  * Copyright 2005-2006, Devicescape Software, Inc.
   6  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
   7  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13 #include <linux/kernel.h>
  14 #include <linux/if_arp.h>
  15 #include <linux/netdevice.h>
  16 #include <linux/rtnetlink.h>
  17 #include <net/mac80211.h>
  18 #include "ieee80211_i.h"
  19 #include "sta_info.h"
  20 #include "debugfs_netdev.h"
  21 #include "mesh.h"
  22 #include "led.h"
  23
  24 /**
  25  * DOC: Interface list locking
  26  *
  27  * The interface list in each struct ieee80211_local is protected
  28  * three-fold:
  29  *
  30  * (1) modifications may only be done under the RTNL
  31  * (2) modifications and readers are protected against each other by
  32  *     the iflist_mtx.
  33  * (3) modifications are done in an RCU manner so atomic readers
  34  *     can traverse the list in RCU-safe blocks.
  35  *
  36  * As a consequence, reads (traversals) of the list can be protected
  37  * by either the RTNL, the iflist_mtx or RCU.
  38  */
  39
  40
  41 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
  42 {
  43         int meshhdrlen;
  44         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
  45
  46         meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
  47
  48         /* FIX: what would be proper limits for MTU?
  49          * This interface uses 802.3 frames. */
  50         if (new_mtu < 256 ||
  51             new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
  52                 return -EINVAL;
  53         }
  54
  55 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
  56         printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
  57 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
  58         dev->mtu = new_mtu;
  59         return 0;
  60 }
  61
  62 static inline int identical_mac_addr_allowed(int type1, int type2)
  63 {
  64         return type1 == NL80211_IFTYPE_MONITOR ||
  65                 type2 == NL80211_IFTYPE_MONITOR ||
  66                 (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
  67                 (type1 == NL80211_IFTYPE_WDS &&
  68                         (type2 == NL80211_IFTYPE_WDS ||
  69                          type2 == NL80211_IFTYPE_AP)) ||
  70                 (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
  71                 (type1 == NL80211_IFTYPE_AP_VLAN &&
  72                         (type2 == NL80211_IFTYPE_AP ||
  73                          type2 == NL80211_IFTYPE_AP_VLAN));
  74 }
  75
  76 static int ieee80211_open(struct net_device *dev)
  77 {
  78         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
  79         struct ieee80211_sub_if_data *nsdata;
  80         struct ieee80211_local *local = sdata->local;
  81         struct sta_info *sta;
  82         struct ieee80211_if_init_conf conf;
  83         u32 changed = 0;
  84         int res;
  85         u32 hw_reconf_flags = 0;
  86         u8 null_addr[ETH_ALEN] = {0};
  87
  88         /* fail early if user set an invalid address */
  89         if (compare_ether_addr(dev->dev_addr, null_addr) &&
  90             !is_valid_ether_addr(dev->dev_addr))
  91                 return -EADDRNOTAVAIL;
  92
  93         /* we hold the RTNL here so can safely walk the list */
  94         list_for_each_entry(nsdata, &local->interfaces, list) {
  95                 struct net_device *ndev = nsdata->dev;
  96
  97                 if (ndev != dev && netif_running(ndev)) {
  98                         /*
  99                          * Allow only a single IBSS interface to be up at any
 100                          * time. This is restricted because beacon distribution
 101                          * cannot work properly if both are in the same IBSS.
 102                          *
 103                          * To remove this restriction we'd have to disallow them
 104                          * from setting the same SSID on different IBSS interfaces
 105                          * belonging to the same hardware. Then, however, we're
 106                          * faced with having to adopt two different TSF timers...
 107                          */
 108                         if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
 109                             nsdata->vif.type == NL80211_IFTYPE_ADHOC)
 110                                 return -EBUSY;
 111
 112                         /*
 113                          * The remaining checks are only performed for interfaces
 114                          * with the same MAC address.
 115                          */
 116                         if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
 117                                 continue;
 118
 119                         /*
 120                          * check whether it may have the same address
 121                          */
 122                         if (!identical_mac_addr_allowed(sdata->vif.type,
 123                                                         nsdata->vif.type))
 124                                 return -ENOTUNIQ;
 125
 126                         /*
 127                          * can only add VLANs to enabled APs
 128                          */
 129                         if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
 130                             nsdata->vif.type == NL80211_IFTYPE_AP)
 131                                 sdata->bss = &nsdata->u.ap;
 132                 }
 133         }
 134
 135         switch (sdata->vif.type) {
 136         case NL80211_IFTYPE_WDS:
 137                 if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
 138                         return -ENOLINK;
 139                 break;
 140         case NL80211_IFTYPE_AP_VLAN:
 141                 if (!sdata->bss)
 142                         return -ENOLINK;
 143                 list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
 144                 break;
 145         case NL80211_IFTYPE_AP:
 146                 sdata->bss = &sdata->u.ap;
 147                 break;
 148         case NL80211_IFTYPE_MESH_POINT:
 149                 if (!ieee80211_vif_is_mesh(&sdata->vif))
 150                         break;
 151                 /* mesh ifaces must set allmulti to forward mcast traffic */
 152                 atomic_inc(&local->iff_allmultis);
 153                 break;
 154         case NL80211_IFTYPE_STATION:
 155         case NL80211_IFTYPE_MONITOR:
 156         case NL80211_IFTYPE_ADHOC:
 157                 /* no special treatment */
 158                 break;
 159         case NL80211_IFTYPE_UNSPECIFIED:
 160         case __NL80211_IFTYPE_AFTER_LAST:
 161                 /* cannot happen */
 162                 WARN_ON(1);
 163                 break;
 164         }
 165
 166         if (local->open_count == 0) {
 167                 res = 0;
 168                 if (local->ops->start)
 169                         res = local->ops->start(local_to_hw(local));
 170                 if (res)
 171                         goto err_del_bss;
 172                 /* we're brought up, everything changes */
 173                 hw_reconf_flags = ~0;
 174                 ieee80211_led_radio(local, local->hw.conf.radio_enabled);
 175         }
 176
 177         /*
 178          * Check all interfaces and copy the hopefully now-present
 179          * MAC address to those that have the special null one.
 180          */
 181         list_for_each_entry(nsdata, &local->interfaces, list) {
 182                 struct net_device *ndev = nsdata->dev;
 183
 184                 /*
 185                  * No need to check netif_running since we do not allow
 186                  * it to start up with this invalid address.
 187                  */
 188                 if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
 189                         memcpy(ndev->dev_addr,
 190                                local->hw.wiphy->perm_addr,
 191                                ETH_ALEN);
 192         }
 193
 194         if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0)
 195                 memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr,
 196                        ETH_ALEN);
 197
 198         /*
 199          * Validate the MAC address for this device.
 200          */
 201         if (!is_valid_ether_addr(dev->dev_addr)) {
 202                 if (!local->open_count && local->ops->stop)
 203                         local->ops->stop(local_to_hw(local));
 204                 return -EADDRNOTAVAIL;
 205         }
 206
 207         switch (sdata->vif.type) {
 208         case NL80211_IFTYPE_AP_VLAN:
 209                 /* no need to tell driver */
 210                 break;
 211         case NL80211_IFTYPE_MONITOR:
 212                 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
 213                         local->cooked_mntrs++;
 214                         break;
 215                 }
 216
 217                 /* must be before the call to ieee80211_configure_filter */
 218                 local->monitors++;
 219                 if (local->monitors == 1) {
 220                         local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
 221                         hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
 222                 }
 223
 224                 if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
 225                         local->fif_fcsfail++;
 226                 if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
 227                         local->fif_plcpfail++;
 228                 if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
 229                         local->fif_control++;
 230                 if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
 231                         local->fif_other_bss++;
 232
 233                 netif_addr_lock_bh(local->mdev);
 234                 ieee80211_configure_filter(local);
 235                 netif_addr_unlock_bh(local->mdev);
 236                 break;
 237         case NL80211_IFTYPE_STATION:
 238         case NL80211_IFTYPE_ADHOC:
 239                 if (sdata->vif.type == NL80211_IFTYPE_STATION)
 240                         sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
 241                 else
 242                         sdata->u.ibss.flags &= ~IEEE80211_IBSS_PREV_BSSID_SET;
 243                 /* fall through */
 244         default:
 245                 conf.vif = &sdata->vif;
 246                 conf.type = sdata->vif.type;
 247                 conf.mac_addr = dev->dev_addr;
 248                 res = local->ops->add_interface(local_to_hw(local), &conf);
 249                 if (res)
 250                         goto err_stop;
 251
 252                 if (ieee80211_vif_is_mesh(&sdata->vif)) {
 253                         local->fif_other_bss++;
 254                         netif_addr_lock_bh(local->mdev);
 255                         ieee80211_configure_filter(local);
 256                         netif_addr_unlock_bh(local->mdev);
 257
 258                         ieee80211_start_mesh(sdata);
 259                 }
 260                 changed |= ieee80211_reset_erp_info(sdata);
 261                 ieee80211_bss_info_change_notify(sdata, changed);
 262                 ieee80211_enable_keys(sdata);
 263
 264                 if (sdata->vif.type == NL80211_IFTYPE_STATION &&
 265                     !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
 266                         netif_carrier_off(dev);
 267                 else
 268                         netif_carrier_on(dev);
 269         }
 270
 271         if (sdata->vif.type == NL80211_IFTYPE_WDS) {
 272                 /* Create STA entry for the WDS peer */
 273                 sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
 274                                      GFP_KERNEL);
 275                 if (!sta) {
 276                         res = -ENOMEM;
 277                         goto err_del_interface;
 278                 }
 279
 280                 /* no locking required since STA is not live yet */
 281                 sta->flags |= WLAN_STA_AUTHORIZED;
 282
 283                 res = sta_info_insert(sta);
 284                 if (res) {
 285                         /* STA has been freed */
 286                         goto err_del_interface;
 287                 }
 288         }
 289
 290         if (local->open_count == 0) {
 291                 res = dev_open(local->mdev);
 292                 WARN_ON(res);
 293                 if (res)
 294                         goto err_del_interface;
 295                 tasklet_enable(&local->tx_pending_tasklet);
 296                 tasklet_enable(&local->tasklet);
 297         }
 298
 299         /*
 300          * set_multicast_list will be invoked by the networking core
 301          * which will check whether any increments here were done in
 302          * error and sync them down to the hardware as filter flags.
 303          */
 304         if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
 305                 atomic_inc(&local->iff_allmultis);
 306
 307         if (sdata->flags & IEEE80211_SDATA_PROMISC)
 308                 atomic_inc(&local->iff_promiscs);
 309
 310         local->open_count++;
 311         if (hw_reconf_flags) {
 312                 ieee80211_hw_config(local, hw_reconf_flags);
 313                 /*
 314                  * set default queue parameters so drivers don't
 315                  * need to initialise the hardware if the hardware
 316                  * doesn't start up with sane defaults
 317                  */
 318                 ieee80211_set_wmm_default(sdata);
 319         }
 320
 321         /*
 322          * ieee80211_sta_work is disabled while network interface
 323          * is down. Therefore, some configuration changes may not
 324          * yet be effective. Trigger execution of ieee80211_sta_work
 325          * to fix this.
 326          */
 327         if (sdata->vif.type == NL80211_IFTYPE_STATION)
 328                 queue_work(local->hw.workqueue, &sdata->u.mgd.work);
 329         else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
 330                 queue_work(local->hw.workqueue, &sdata->u.ibss.work);
 331
 332         netif_tx_start_all_queues(dev);
 333
 334         return 0;
 335  err_del_interface:
 336         local->ops->remove_interface(local_to_hw(local), &conf);
 337  err_stop:
 338         if (!local->open_count && local->ops->stop)
 339                 local->ops->stop(local_to_hw(local));
 340  err_del_bss:
 341         sdata->bss = NULL;
 342         if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 343                 list_del(&sdata->u.vlan.list);
 344         return res;
 345 }
 346
 347 static int ieee80211_stop(struct net_device *dev)
 348 {
 349         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 350         struct ieee80211_local *local = sdata->local;
 351         struct ieee80211_if_init_conf conf;
 352         struct sta_info *sta;
 353         u32 hw_reconf_flags = 0;
 354
 355         /*
 356          * Stop TX on this interface first.
 357          */
 358         netif_tx_stop_all_queues(dev);
 359
 360         /*
 361          * Now delete all active aggregation sessions.
 362          */
 363         rcu_read_lock();
 364
 365         list_for_each_entry_rcu(sta, &local->sta_list, list) {
 366                 if (sta->sdata == sdata)
 367                         ieee80211_sta_tear_down_BA_sessions(sta);
 368         }
 369
 370         rcu_read_unlock();
 371
 372         /*
 373          * Announce that we are leaving the network, in case we are a
 374          * station interface type. This must be done before removing
 375          * all stations associated with sta_info_flush, otherwise STA
 376          * information will be gone and no announce being done.
 377          */
 378         if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 379                 if (sdata->u.mgd.state != IEEE80211_STA_MLME_DISABLED)
 380                         ieee80211_sta_deauthenticate(sdata,
 381                                 WLAN_REASON_DEAUTH_LEAVING);
 382         }
 383
 384         /*
 385          * Remove all stations associated with this interface.
 386          *
 387          * This must be done before calling ops->remove_interface()
 388          * because otherwise we can later invoke ops->sta_notify()
 389          * whenever the STAs are removed, and that invalidates driver
 390          * assumptions about always getting a vif pointer that is valid
 391          * (because if we remove a STA after ops->remove_interface()
 392          * the driver will have removed the vif info already!)
 393          *
 394          * We could relax this and only unlink the stations from the
 395          * hash table and list but keep them on a per-sdata list that
 396          * will be inserted back again when the interface is brought
 397          * up again, but I don't currently see a use case for that,
 398          * except with WDS which gets a STA entry created when it is
 399          * brought up.
 400          */
 401         sta_info_flush(local, sdata);
 402
 403         /*
 404          * Don't count this interface for promisc/allmulti while it
 405          * is down. dev_mc_unsync() will invoke set_multicast_list
 406          * on the master interface which will sync these down to the
 407          * hardware as filter flags.
 408          */
 409         if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
 410                 atomic_dec(&local->iff_allmultis);
 411
 412         if (sdata->flags & IEEE80211_SDATA_PROMISC)
 413                 atomic_dec(&local->iff_promiscs);
 414
 415         dev_mc_unsync(local->mdev, dev);
 416         del_timer_sync(&local->dynamic_ps_timer);
 417         cancel_work_sync(&local->dynamic_ps_enable_work);
 418
 419         /* APs need special treatment */
 420         if (sdata->vif.type == NL80211_IFTYPE_AP) {
 421                 struct ieee80211_sub_if_data *vlan, *tmp;
 422                 struct beacon_data *old_beacon = sdata->u.ap.beacon;
 423
 424                 /* remove beacon */
 425                 rcu_assign_pointer(sdata->u.ap.beacon, NULL);
 426                 synchronize_rcu();
 427                 kfree(old_beacon);
 428
 429                 /* down all dependent devices, that is VLANs */
 430                 list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
 431                                          u.vlan.list)
 432                         dev_close(vlan->dev);
 433                 WARN_ON(!list_empty(&sdata->u.ap.vlans));
 434         }
 435
 436         local->open_count--;
 437
 438         switch (sdata->vif.type) {
 439         case NL80211_IFTYPE_AP_VLAN:
 440                 list_del(&sdata->u.vlan.list);
 441                 /* no need to tell driver */
 442                 break;
 443         case NL80211_IFTYPE_MONITOR:
 444                 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
 445                         local->cooked_mntrs--;
 446                         break;
 447                 }
 448
 449                 local->monitors--;
 450                 if (local->monitors == 0) {
 451                         local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
 452                         hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
 453                 }
 454
 455                 if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
 456                         local->fif_fcsfail--;
 457                 if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
 458                         local->fif_plcpfail--;
 459                 if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
 460                         local->fif_control--;
 461                 if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
 462                         local->fif_other_bss--;
 463
 464                 netif_addr_lock_bh(local->mdev);
 465                 ieee80211_configure_filter(local);
 466                 netif_addr_unlock_bh(local->mdev);
 467                 break;
 468         case NL80211_IFTYPE_STATION:
 469                 memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
 470                 del_timer_sync(&sdata->u.mgd.chswitch_timer);
 471                 del_timer_sync(&sdata->u.mgd.timer);
 472                 /*
 473                  * If the timer fired while we waited for it, it will have
 474                  * requeued the work. Now the work will be running again
 475                  * but will not rearm the timer again because it checks
 476                  * whether the interface is running, which, at this point,
 477                  * it no longer is.
 478                  */
 479                 cancel_work_sync(&sdata->u.mgd.work);
 480                 cancel_work_sync(&sdata->u.mgd.chswitch_work);
 481                 /*
 482                  * When we get here, the interface is marked down.
 483                  * Call synchronize_rcu() to wait for the RX path
 484                  * should it be using the interface and enqueuing
 485                  * frames at this very time on another CPU.
 486                  */
 487                 synchronize_rcu();
 488                 skb_queue_purge(&sdata->u.mgd.skb_queue);
 489
 490                 sdata->u.mgd.flags &= ~(IEEE80211_STA_PRIVACY_INVOKED |
 491                                         IEEE80211_STA_TKIP_WEP_USED);
 492                 kfree(sdata->u.mgd.extra_ie);
 493                 sdata->u.mgd.extra_ie = NULL;
 494                 sdata->u.mgd.extra_ie_len = 0;
 495                 /* fall through */
 496         case NL80211_IFTYPE_ADHOC:
 497                 if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
 498                         memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
 499                         del_timer_sync(&sdata->u.ibss.timer);
 500                         cancel_work_sync(&sdata->u.ibss.work);
 501                         synchronize_rcu();
 502                         skb_queue_purge(&sdata->u.ibss.skb_queue);
 503                 }
 504                 /* fall through */
 505         case NL80211_IFTYPE_MESH_POINT:
 506                 if (ieee80211_vif_is_mesh(&sdata->vif)) {
 507                         /* other_bss and allmulti are always set on mesh
 508                          * ifaces */
 509                         local->fif_other_bss--;
 510                         atomic_dec(&local->iff_allmultis);
 511
 512                         netif_addr_lock_bh(local->mdev);
 513                         ieee80211_configure_filter(local);
 514                         netif_addr_unlock_bh(local->mdev);
 515
 516                         ieee80211_stop_mesh(sdata);
 517                 }
 518                 /* fall through */
 519         default:
 520                 if (local->scan_sdata == sdata) {
 521                         if (!local->ops->hw_scan)
 522                                 cancel_delayed_work_sync(&local->scan_work);
 523                         /*
 524                          * The software scan can no longer run now, so we can
 525                          * clear out the scan_sdata reference. However, the
 526                          * hardware scan may still be running. The complete
 527                          * function must be prepared to handle a NULL value.
 528                          */
 529                         local->scan_sdata = NULL;
 530                         /*
 531                          * The memory barrier guarantees that another CPU
 532                          * that is hardware-scanning will now see the fact
 533                          * that this interface is gone.
 534                          */
 535                         smp_mb();
 536                         /*
 537                          * If software scanning, complete the scan but since
 538                          * the scan_sdata is NULL already don't send out a
 539                          * scan event to userspace -- the scan is incomplete.
 540                          */
 541                         if (local->sw_scanning)
 542                                 ieee80211_scan_completed(&local->hw, true);
 543                 }
 544
 545                 conf.vif = &sdata->vif;
 546                 conf.type = sdata->vif.type;
 547                 conf.mac_addr = dev->dev_addr;
 548                 /* disable all keys for as long as this netdev is down */
 549                 ieee80211_disable_keys(sdata);
 550                 local->ops->remove_interface(local_to_hw(local), &conf);
 551         }
 552
 553         sdata->bss = NULL;
 554
 555         if (local->open_count == 0) {
 556                 if (netif_running(local->mdev))
 557                         dev_close(local->mdev);
 558
 559                 if (local->ops->stop)
 560                         local->ops->stop(local_to_hw(local));
 561
 562                 ieee80211_led_radio(local, 0);
 563
 564                 flush_workqueue(local->hw.workqueue);
 565
 566                 tasklet_disable(&local->tx_pending_tasklet);
 567                 tasklet_disable(&local->tasklet);
 568
 569                 /* no reconfiguring after stop! */
 570                 hw_reconf_flags = 0;
 571         }
 572
 573         /* do after stop to avoid reconfiguring when we stop anyway */
 574         if (hw_reconf_flags)
 575                 ieee80211_hw_config(local, hw_reconf_flags);
 576
 577         return 0;
 578 }
 579
 580 static void ieee80211_set_multicast_list(struct net_device *dev)
 581 {
 582         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 583         struct ieee80211_local *local = sdata->local;
 584         int allmulti, promisc, sdata_allmulti, sdata_promisc;
 585
 586         allmulti = !!(dev->flags & IFF_ALLMULTI);
 587         promisc = !!(dev->flags & IFF_PROMISC);
 588         sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
 589         sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
 590
 591         if (allmulti != sdata_allmulti) {
 592                 if (dev->flags & IFF_ALLMULTI)
 593                         atomic_inc(&local->iff_allmultis);
 594                 else
 595                         atomic_dec(&local->iff_allmultis);
 596                 sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
 597         }
 598
 599         if (promisc != sdata_promisc) {
 600                 if (dev->flags & IFF_PROMISC)
 601                         atomic_inc(&local->iff_promiscs);
 602                 else
 603                         atomic_dec(&local->iff_promiscs);
 604                 sdata->flags ^= IEEE80211_SDATA_PROMISC;
 605         }
 606
 607         dev_mc_sync(local->mdev, dev);
 608 }
 609
 610 /*
 611  * Called when the netdev is removed or, by the code below, before
 612  * the interface type changes.
 613  */
 614 static void ieee80211_teardown_sdata(struct net_device *dev)
 615 {
 616         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 617         struct ieee80211_local *local = sdata->local;
 618         struct beacon_data *beacon;
 619         struct sk_buff *skb;
 620         int flushed;
 621         int i;
 622
 623         /* free extra data */
 624         ieee80211_free_keys(sdata);
 625
 626         ieee80211_debugfs_remove_netdev(sdata);
 627
 628         for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
 629                 __skb_queue_purge(&sdata->fragments[i].skb_list);
 630         sdata->fragment_next = 0;
 631
 632         switch (sdata->vif.type) {
 633         case NL80211_IFTYPE_AP:
 634                 beacon = sdata->u.ap.beacon;
 635                 rcu_assign_pointer(sdata->u.ap.beacon, NULL);
 636                 synchronize_rcu();
 637                 kfree(beacon);
 638
 639                 while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) {
 640                         local->total_ps_buffered--;
 641                         dev_kfree_skb(skb);
 642                 }
 643
 644                 break;
 645         case NL80211_IFTYPE_MESH_POINT:
 646                 if (ieee80211_vif_is_mesh(&sdata->vif))
 647                         mesh_rmc_free(sdata);
 648                 break;
 649         case NL80211_IFTYPE_ADHOC:
 650                 kfree_skb(sdata->u.ibss.probe_resp);
 651                 break;
 652         case NL80211_IFTYPE_STATION:
 653                 kfree(sdata->u.mgd.extra_ie);
 654                 kfree(sdata->u.mgd.assocreq_ies);
 655                 kfree(sdata->u.mgd.assocresp_ies);
 656                 kfree(sdata->u.mgd.sme_auth_ie);
 657                 break;
 658         case NL80211_IFTYPE_WDS:
 659         case NL80211_IFTYPE_AP_VLAN:
 660         case NL80211_IFTYPE_MONITOR:
 661                 break;
 662         case NL80211_IFTYPE_UNSPECIFIED:
 663         case __NL80211_IFTYPE_AFTER_LAST:
 664                 BUG();
 665                 break;
 666         }
 667
 668         flushed = sta_info_flush(local, sdata);
 669         WARN_ON(flushed);
 670 }
 671
 672 static const struct net_device_ops ieee80211_dataif_ops = {
 673         .ndo_open               = ieee80211_open,
 674         .ndo_stop               = ieee80211_stop,
 675         .ndo_uninit             = ieee80211_teardown_sdata,
 676         .ndo_start_xmit         = ieee80211_subif_start_xmit,
 677         .ndo_set_multicast_list = ieee80211_set_multicast_list,
 678         .ndo_change_mtu         = ieee80211_change_mtu,
 679         .ndo_set_mac_address    = eth_mac_addr,
 680 };
 681
 682 static const struct net_device_ops ieee80211_monitorif_ops = {
 683         .ndo_open               = ieee80211_open,
 684         .ndo_stop               = ieee80211_stop,
 685         .ndo_uninit             = ieee80211_teardown_sdata,
 686         .ndo_start_xmit         = ieee80211_monitor_start_xmit,
 687         .ndo_set_multicast_list = ieee80211_set_multicast_list,
 688         .ndo_change_mtu         = ieee80211_change_mtu,
 689         .ndo_set_mac_address    = eth_mac_addr,
 690 };
 691
 692 static void ieee80211_if_setup(struct net_device *dev)
 693 {
 694         ether_setup(dev);
 695         dev->netdev_ops = &ieee80211_dataif_ops;
 696         dev->wireless_handlers = &ieee80211_iw_handler_def;
 697         dev->destructor = free_netdev;
 698 }
 699
 700 /*
 701  * Helper function to initialise an interface to a specific type.
 702  */
 703 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 704                                   enum nl80211_iftype type)
 705 {
 706         /* clear type-dependent union */
 707         memset(&sdata->u, 0, sizeof(sdata->u));
 708
 709         /* and set some type-dependent values */
 710         sdata->vif.type = type;
 711         sdata->dev->netdev_ops = &ieee80211_dataif_ops;
 712         sdata->wdev.iftype = type;
 713
 714         /* only monitor differs */
 715         sdata->dev->type = ARPHRD_ETHER;
 716
 717         switch (type) {
 718         case NL80211_IFTYPE_AP:
 719                 skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
 720                 INIT_LIST_HEAD(&sdata->u.ap.vlans);
 721                 break;
 722         case NL80211_IFTYPE_STATION:
 723                 ieee80211_sta_setup_sdata(sdata);
 724                 break;
 725         case NL80211_IFTYPE_ADHOC:
 726                 ieee80211_ibss_setup_sdata(sdata);
 727                 break;
 728         case NL80211_IFTYPE_MESH_POINT:
 729                 if (ieee80211_vif_is_mesh(&sdata->vif))
 730                         ieee80211_mesh_init_sdata(sdata);
 731                 break;
 732         case NL80211_IFTYPE_MONITOR:
 733                 sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
 734                 sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
 735                 sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
 736                                       MONITOR_FLAG_OTHER_BSS;
 737                 break;
 738         case NL80211_IFTYPE_WDS:
 739         case NL80211_IFTYPE_AP_VLAN:
 740                 break;
 741         case NL80211_IFTYPE_UNSPECIFIED:
 742         case __NL80211_IFTYPE_AFTER_LAST:
 743                 BUG();
 744                 break;
 745         }
 746
 747         ieee80211_debugfs_add_netdev(sdata);
 748 }
 749
 750 int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 751                              enum nl80211_iftype type)
 752 {
 753         ASSERT_RTNL();
 754
 755         if (type == sdata->vif.type)
 756                 return 0;
 757
 758         /* Setting ad-hoc mode on non-IBSS channel is not supported. */
 759         if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
 760             type == NL80211_IFTYPE_ADHOC)
 761                 return -EOPNOTSUPP;
 762
 763         /*
 764          * We could, here, on changes between IBSS/STA/MESH modes,
 765          * invoke an MLME function instead that disassociates etc.
 766          * and goes into the requested mode.
 767          */
 768
 769         if (netif_running(sdata->dev))
 770                 return -EBUSY;
 771
 772         /* Purge and reset type-dependent state. */
 773         ieee80211_teardown_sdata(sdata->dev);
 774         ieee80211_setup_sdata(sdata, type);
 775
 776         /* reset some values that shouldn't be kept across type changes */
 777         sdata->vif.bss_conf.basic_rates =
 778                 ieee80211_mandatory_rates(sdata->local,
 779                         sdata->local->hw.conf.channel->band);
 780         sdata->drop_unencrypted = 0;
 781
 782         return 0;
 783 }
 784
 785 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 786                      struct net_device **new_dev, enum nl80211_iftype type,
 787                      struct vif_params *params)
 788 {
 789         struct net_device *ndev;
 790         struct ieee80211_sub_if_data *sdata = NULL;
 791         int ret, i;
 792
 793         ASSERT_RTNL();
 794
 795         ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
 796                             name, ieee80211_if_setup);
 797         if (!ndev)
 798                 return -ENOMEM;
 799
 800         ndev->needed_headroom = local->tx_headroom +
 801                                 4*6 /* four MAC addresses */
 802                                 + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
 803                                 + 6 /* mesh */
 804                                 + 8 /* rfc1042/bridge tunnel */
 805                                 - ETH_HLEN /* ethernet hard_header_len */
 806                                 + IEEE80211_ENCRYPT_HEADROOM;
 807         ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
 808
 809         ret = dev_alloc_name(ndev, ndev->name);
 810         if (ret < 0)
 811                 goto fail;
 812
 813         memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
 814         SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
 815         ndev->features |= NETIF_F_NETNS_LOCAL;
 816
 817         /* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
 818         sdata = netdev_priv(ndev);
 819         ndev->ieee80211_ptr = &sdata->wdev;
 820
 821         /* initialise type-independent data */
 822         sdata->wdev.wiphy = local->hw.wiphy;
 823         sdata->local = local;
 824         sdata->dev = ndev;
 825
 826         for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
 827                 skb_queue_head_init(&sdata->fragments[i].skb_list);
 828
 829         INIT_LIST_HEAD(&sdata->key_list);
 830
 831         sdata->force_unicast_rateidx = -1;
 832         sdata->max_ratectrl_rateidx = -1;
 833
 834         /* setup type-dependent data */
 835         ieee80211_setup_sdata(sdata, type);
 836
 837         ret = register_netdevice(ndev);
 838         if (ret)
 839                 goto fail;
 840
 841         if (ieee80211_vif_is_mesh(&sdata->vif) &&
 842             params && params->mesh_id_len)
 843                 ieee80211_sdata_set_mesh_id(sdata,
 844                                             params->mesh_id_len,
 845                                             params->mesh_id);
 846
 847         mutex_lock(&local->iflist_mtx);
 848         list_add_tail_rcu(&sdata->list, &local->interfaces);
 849         mutex_unlock(&local->iflist_mtx);
 850
 851         if (new_dev)
 852                 *new_dev = ndev;
 853
 854         return 0;
 855
 856  fail:
 857         free_netdev(ndev);
 858         return ret;
 859 }
 860
 861 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
 862 {
 863         ASSERT_RTNL();
 864
 865         mutex_lock(&sdata->local->iflist_mtx);
 866         list_del_rcu(&sdata->list);
 867         mutex_unlock(&sdata->local->iflist_mtx);
 868
 869         synchronize_rcu();
 870         unregister_netdevice(sdata->dev);
 871 }
 872
 873 /*
 874  * Remove all interfaces, may only be called at hardware unregistration
 875  * time because it doesn't do RCU-safe list removals.
 876  */
 877 void ieee80211_remove_interfaces(struct ieee80211_local *local)
 878 {
 879         struct ieee80211_sub_if_data *sdata, *tmp;
 880
 881         ASSERT_RTNL();
 882
 883         list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
 884                 /*
 885                  * we cannot hold the iflist_mtx across unregister_netdevice,
 886                  * but we only need to hold it for list modifications to lock
 887                  * out readers since we're under the RTNL here as all other
 888                  * writers.
 889                  */
 890                 mutex_lock(&local->iflist_mtx);
 891                 list_del(&sdata->list);
 892                 mutex_unlock(&local->iflist_mtx);
 893
 894                 unregister_netdevice(sdata->dev);
 895         }
 896 }