2 * NET3: Implementation of the ICMP protocol layer.
4 * Alan Cox, <alan@lxorguk.ukuu.org.uk>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * Some of the function names and the icmp unreach table for this
12 * module were derived from [icmp.c 1.0.11 06/02/93] by
13 * Ross Biro, Fred N. van Kempen, Mark Evans, Alan Cox, Gerhard Koerting.
14 * Other than that this module is a complete rewrite.
17 * Clemens Fruhwirth : introduce global icmp rate limiting
18 * with icmp type masking ability instead
19 * of broken per type icmp timeouts.
20 * Mike Shaver : RFC1122 checks.
21 * Alan Cox : Multicast ping reply as self.
22 * Alan Cox : Fix atomicity lockup in ip_build_xmit
24 * Alan Cox : Added 216,128 byte paths to the MTU
26 * Martin Mares : RFC1812 checks.
27 * Martin Mares : Can be configured to follow redirects
28 * if acting as a router _without_ a
29 * routing protocol (RFC 1812).
30 * Martin Mares : Echo requests may be configured to
31 * be ignored (RFC 1812).
32 * Martin Mares : Limitation of ICMP error message
33 * transmit rate (RFC 1812).
34 * Martin Mares : TOS and Precedence set correctly
36 * Martin Mares : Now copying as much data from the
37 * original packet as we can without
38 * exceeding 576 bytes (RFC 1812).
39 * Willy Konynenberg : Transparent proxying support.
40 * Keith Owens : RFC1191 correction for 4.2BSD based
42 * Thomas Quinot : ICMP Dest Unreach codes up to 15 are
44 * Andi Kleen : Check all packet lengths properly
45 * and moved all kfree_skb() up to
47 * Andi Kleen : Move the rate limit bookkeeping
48 * into the dest entry and use a token
49 * bucket filter (thanks to ANK). Make
50 * the rates sysctl configurable.
51 * Yu Tianli : Fixed two ugly bugs in icmp_send
52 * - IP option length was accounted wrongly
53 * - ICMP header length was not accounted
55 * Tristan Greaves : Added sysctl option to ignore bogus
56 * broadcast responses from broken routers.
60 * - Should use skb_pull() instead of all the manual checking.
61 * This would also greatly simply some upper layer error handlers. --AK
65 #include <linux/module.h>
66 #include <linux/types.h>
67 #include <linux/jiffies.h>
68 #include <linux/kernel.h>
69 #include <linux/fcntl.h>
70 #include <linux/socket.h>
72 #include <linux/inet.h>
73 #include <linux/inetdevice.h>
74 #include <linux/netdevice.h>
75 #include <linux/string.h>
76 #include <linux/netfilter_ipv4.h>
79 #include <net/route.h>
80 #include <net/protocol.h>
85 #include <linux/skbuff.h>
87 #include <linux/errno.h>
88 #include <linux/timer.h>
89 #include <linux/init.h>
90 #include <asm/system.h>
91 #include <asm/uaccess.h>
92 #include <net/checksum.h>
94 #include <net/inet_common.h>
97 * Build xmit assembly blocks
106 struct icmphdr icmph;
110 struct ip_options replyopts;
111 unsigned char optbuf[40];
114 /* An array of errno for error messages from dest unreach. */
115 /* RFC 1122: 3.2.2.1 States that NET_UNREACH, HOST_UNREACH and SR_FAILED MUST be considered 'transient errs'. */
117 struct icmp_err icmp_err_convert[] = {
119 .errno = ENETUNREACH, /* ICMP_NET_UNREACH */
123 .errno = EHOSTUNREACH, /* ICMP_HOST_UNREACH */
127 .errno = ENOPROTOOPT /* ICMP_PROT_UNREACH */,
131 .errno = ECONNREFUSED, /* ICMP_PORT_UNREACH */
135 .errno = EMSGSIZE, /* ICMP_FRAG_NEEDED */
139 .errno = EOPNOTSUPP, /* ICMP_SR_FAILED */
143 .errno = ENETUNREACH, /* ICMP_NET_UNKNOWN */
147 .errno = EHOSTDOWN, /* ICMP_HOST_UNKNOWN */
151 .errno = ENONET, /* ICMP_HOST_ISOLATED */
155 .errno = ENETUNREACH, /* ICMP_NET_ANO */
159 .errno = EHOSTUNREACH, /* ICMP_HOST_ANO */
163 .errno = ENETUNREACH, /* ICMP_NET_UNR_TOS */
167 .errno = EHOSTUNREACH, /* ICMP_HOST_UNR_TOS */
171 .errno = EHOSTUNREACH, /* ICMP_PKT_FILTERED */
175 .errno = EHOSTUNREACH, /* ICMP_PREC_VIOLATION */
179 .errno = EHOSTUNREACH, /* ICMP_PREC_CUTOFF */
185 * ICMP control array. This specifies what to do with each ICMP.
188 struct icmp_control {
189 void (*handler)(struct sk_buff *skb);
190 short error; /* This ICMP is classed as an error message */
193 static const struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
196 * The ICMP socket(s). This is the most convenient way to flow control
197 * our ICMP output as well as maintain a clean interface throughout
198 * all layers. All Socketless IP sends will soon be gone.
200 * On SMP we have one ICMP socket per-cpu.
202 static struct sock *icmp_sk(struct net *net)
204 return net->ipv4.icmp_sk[smp_processor_id()];
207 static inline struct sock *icmp_xmit_lock(struct net *net)
215 if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
216 /* This can happen if the output path signals a
217 * dst_link_failure() for an outgoing ICMP packet.
225 static inline void icmp_xmit_unlock(struct sock *sk)
227 spin_unlock_bh(&sk->sk_lock.slock);
231 * Send an ICMP frame.
235 * Check transmit rate limitation for given message.
236 * The rate information is held in the destination cache now.
237 * This function is generic and could be used for other purposes
238 * too. It uses a Token bucket filter as suggested by Alexey Kuznetsov.
240 * Note that the same dst_entry fields are modified by functions in
241 * route.c too, but these work for packet destinations while xrlim_allow
242 * works for icmp destinations. This means the rate limiting information
243 * for one "ip object" is shared - and these ICMPs are twice limited:
244 * by source and by destination.
246 * RFC 1812: 4.3.2.8 SHOULD be able to limit error message rate
247 * SHOULD allow setting of rate limits
249 * Shared between ICMPv4 and ICMPv6.
251 #define XRLIM_BURST_FACTOR 6
252 int xrlim_allow(struct dst_entry *dst, int timeout)
254 unsigned long now, token = dst->rate_tokens;
258 token += now - dst->rate_last;
259 dst->rate_last = now;
260 if (token > XRLIM_BURST_FACTOR * timeout)
261 token = XRLIM_BURST_FACTOR * timeout;
262 if (token >= timeout) {
266 dst->rate_tokens = token;
270 static inline int icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
273 struct dst_entry *dst = &rt->u.dst;
276 if (type > NR_ICMP_TYPES)
279 /* Don't limit PMTU discovery. */
280 if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED)
283 /* No rate limit on loopback */
284 if (dst->dev && (dst->dev->flags&IFF_LOOPBACK))
287 /* Limit if icmp type is enabled in ratemask. */
288 if ((1 << type) & net->ipv4.sysctl_icmp_ratemask)
289 rc = xrlim_allow(dst, net->ipv4.sysctl_icmp_ratelimit);
295 * Maintain the counters used in the SNMP statistics for outgoing ICMP
297 void icmp_out_count(struct net *net, unsigned char type)
299 ICMPMSGOUT_INC_STATS(net, type);
300 ICMP_INC_STATS(net, ICMP_MIB_OUTMSGS);
304 * Checksum each fragment, and on the first include the headers and final
307 static int icmp_glue_bits(void *from, char *to, int offset, int len, int odd,
310 struct icmp_bxm *icmp_param = (struct icmp_bxm *)from;
313 csum = skb_copy_and_csum_bits(icmp_param->skb,
314 icmp_param->offset + offset,
317 skb->csum = csum_block_add(skb->csum, csum, odd);
318 if (icmp_pointers[icmp_param->data.icmph.type].error)
319 nf_ct_attach(skb, icmp_param->skb);
323 static void icmp_push_reply(struct icmp_bxm *icmp_param,
324 struct ipcm_cookie *ipc, struct rtable *rt)
329 sk = icmp_sk(dev_net(rt->u.dst.dev));
330 if (ip_append_data(sk, icmp_glue_bits, icmp_param,
331 icmp_param->data_len+icmp_param->head_len,
332 icmp_param->head_len,
333 ipc, rt, MSG_DONTWAIT) < 0)
334 ip_flush_pending_frames(sk);
335 else if ((skb = skb_peek(&sk->sk_write_queue)) != NULL) {
336 struct icmphdr *icmph = icmp_hdr(skb);
338 struct sk_buff *skb1;
340 skb_queue_walk(&sk->sk_write_queue, skb1) {
341 csum = csum_add(csum, skb1->csum);
343 csum = csum_partial_copy_nocheck((void *)&icmp_param->data,
345 icmp_param->head_len, csum);
346 icmph->checksum = csum_fold(csum);
347 skb->ip_summed = CHECKSUM_NONE;
348 ip_push_pending_frames(sk);
353 * Driving logic for building and sending ICMP messages.
356 static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
358 struct ipcm_cookie ipc;
359 struct rtable *rt = skb->rtable;
360 struct net *net = dev_net(rt->u.dst.dev);
362 struct inet_sock *inet;
365 if (ip_options_echo(&icmp_param->replyopts, skb))
368 sk = icmp_xmit_lock(net);
373 icmp_param->data.icmph.checksum = 0;
375 inet->tos = ip_hdr(skb)->tos;
376 daddr = ipc.addr = rt->rt_src;
378 if (icmp_param->replyopts.optlen) {
379 ipc.opt = &icmp_param->replyopts;
381 daddr = icmp_param->replyopts.faddr;
384 struct flowi fl = { .nl_u = { .ip4_u =
386 .saddr = rt->rt_spec_dst,
387 .tos = RT_TOS(ip_hdr(skb)->tos) } },
388 .proto = IPPROTO_ICMP };
389 security_skb_classify_flow(skb, &fl);
390 if (ip_route_output_key(net, &rt, &fl))
393 if (icmpv4_xrlim_allow(net, rt, icmp_param->data.icmph.type,
394 icmp_param->data.icmph.code))
395 icmp_push_reply(icmp_param, &ipc, rt);
398 icmp_xmit_unlock(sk);
403 * Send an ICMP message in response to a situation
405 * RFC 1122: 3.2.2 MUST send at least the IP header and 8 bytes of header.
406 * MAY send more (we do).
407 * MUST NOT change this header information.
408 * MUST NOT reply to a multicast/broadcast IP address.
409 * MUST NOT reply to a multicast/broadcast MAC address.
410 * MUST reply to only the first fragment.
413 void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
417 struct icmp_bxm icmp_param;
418 struct rtable *rt = skb_in->rtable;
419 struct ipcm_cookie ipc;
427 net = dev_net(rt->u.dst.dev);
430 * Find the original header. It is expected to be valid, of course.
431 * Check this, icmp_send is called from the most obscure devices
434 iph = ip_hdr(skb_in);
436 if ((u8 *)iph < skb_in->head ||
437 (skb_in->network_header + sizeof(*iph)) > skb_in->tail)
441 * No replies to physical multicast/broadcast
443 if (skb_in->pkt_type != PACKET_HOST)
447 * Now check at the protocol level
449 if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
453 * Only reply to fragment 0. We byte re-order the constant
454 * mask for efficiency.
456 if (iph->frag_off & htons(IP_OFFSET))
460 * If we send an ICMP error to an ICMP error a mess would result..
462 if (icmp_pointers[type].error) {
464 * We are an error, check if we are replying to an
467 if (iph->protocol == IPPROTO_ICMP) {
468 u8 _inner_type, *itp;
470 itp = skb_header_pointer(skb_in,
471 skb_network_header(skb_in) +
473 offsetof(struct icmphdr,
482 * Assume any unknown ICMP type is an error. This
483 * isn't specified by the RFC, but think about it..
485 if (*itp > NR_ICMP_TYPES ||
486 icmp_pointers[*itp].error)
491 sk = icmp_xmit_lock(net);
496 * Construct source address and options.
500 if (!(rt->rt_flags & RTCF_LOCAL)) {
501 struct net_device *dev = NULL;
504 net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr)
505 dev = dev_get_by_index(net, rt->fl.iif);
508 saddr = inet_select_addr(dev, 0, RT_SCOPE_LINK);
514 tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) |
515 IPTOS_PREC_INTERNETCONTROL) :
518 if (ip_options_echo(&icmp_param.replyopts, skb_in))
523 * Prepare data for ICMP header.
526 icmp_param.data.icmph.type = type;
527 icmp_param.data.icmph.code = code;
528 icmp_param.data.icmph.un.gateway = info;
529 icmp_param.data.icmph.checksum = 0;
530 icmp_param.skb = skb_in;
531 icmp_param.offset = skb_network_offset(skb_in);
532 inet_sk(sk)->tos = tos;
533 ipc.addr = iph->saddr;
534 ipc.opt = &icmp_param.replyopts;
540 .daddr = icmp_param.replyopts.srr ?
541 icmp_param.replyopts.faddr :
547 .proto = IPPROTO_ICMP,
558 security_skb_classify_flow(skb_in, &fl);
559 if (__ip_route_output_key(net, &rt, &fl))
562 /* No need to clone since we're just using its address. */
565 err = xfrm_lookup((struct dst_entry **)&rt, &fl, NULL, 0);
578 if (xfrm_decode_session_reverse(skb_in, &fl, AF_INET))
579 goto relookup_failed;
581 if (inet_addr_type(net, fl.fl4_src) == RTN_LOCAL)
582 err = __ip_route_output_key(net, &rt2, &fl);
584 struct flowi fl2 = {};
585 struct dst_entry *odst;
587 fl2.fl4_dst = fl.fl4_src;
588 if (ip_route_output_key(net, &rt2, &fl2))
589 goto relookup_failed;
593 err = ip_route_input(skb_in, fl.fl4_dst, fl.fl4_src,
594 RT_TOS(tos), rt2->u.dst.dev);
596 dst_release(&rt2->u.dst);
597 rt2 = skb_in->rtable;
602 goto relookup_failed;
604 err = xfrm_lookup((struct dst_entry **)&rt2, &fl, NULL,
608 dst_release(&rt->u.dst);
622 if (!icmpv4_xrlim_allow(net, rt, type, code))
625 /* RFC says return as much as we can without exceeding 576 bytes. */
627 room = dst_mtu(&rt->u.dst);
630 room -= sizeof(struct iphdr) + icmp_param.replyopts.optlen;
631 room -= sizeof(struct icmphdr);
633 icmp_param.data_len = skb_in->len - icmp_param.offset;
634 if (icmp_param.data_len > room)
635 icmp_param.data_len = room;
636 icmp_param.head_len = sizeof(struct icmphdr);
638 icmp_push_reply(&icmp_param, &ipc, rt);
642 icmp_xmit_unlock(sk);
648 * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, and ICMP_QUENCH.
651 static void icmp_unreach(struct sk_buff *skb)
654 struct icmphdr *icmph;
656 struct net_protocol *ipprot;
660 net = dev_net(skb->dst->dev);
663 * Incomplete header ?
664 * Only checks for the IP header, there should be an
665 * additional check for longer headers in upper levels.
668 if (!pskb_may_pull(skb, sizeof(struct iphdr)))
671 icmph = icmp_hdr(skb);
672 iph = (struct iphdr *)skb->data;
674 if (iph->ihl < 5) /* Mangled header, drop. */
677 if (icmph->type == ICMP_DEST_UNREACH) {
678 switch (icmph->code & 15) {
679 case ICMP_NET_UNREACH:
680 case ICMP_HOST_UNREACH:
681 case ICMP_PROT_UNREACH:
682 case ICMP_PORT_UNREACH:
684 case ICMP_FRAG_NEEDED:
685 if (ipv4_config.no_pmtu_disc) {
686 LIMIT_NETDEBUG(KERN_INFO "ICMP: " NIPQUAD_FMT ": "
687 "fragmentation needed "
689 NIPQUAD(iph->daddr));
691 info = ip_rt_frag_needed(net, iph,
692 ntohs(icmph->un.frag.mtu),
699 LIMIT_NETDEBUG(KERN_INFO "ICMP: " NIPQUAD_FMT ": Source "
701 NIPQUAD(iph->daddr));
706 if (icmph->code > NR_ICMP_UNREACH)
708 } else if (icmph->type == ICMP_PARAMETERPROB)
709 info = ntohl(icmph->un.gateway) >> 24;
712 * Throw it at our lower layers
714 * RFC 1122: 3.2.2 MUST extract the protocol ID from the passed
716 * RFC 1122: 3.2.2.1 MUST pass ICMP unreach messages to the
718 * RFC 1122: 3.2.2.2 MUST pass ICMP time expired messages to
723 * Check the other end isnt violating RFC 1122. Some routers send
724 * bogus responses to broadcast frames. If you see this message
725 * first check your netmask matches at both ends, if it does then
726 * get the other vendor to fix their kit.
729 if (!net->ipv4.sysctl_icmp_ignore_bogus_error_responses &&
730 inet_addr_type(net, iph->daddr) == RTN_BROADCAST) {
732 printk(KERN_WARNING NIPQUAD_FMT " sent an invalid ICMP "
734 "error to a broadcast: " NIPQUAD_FMT " on %s\n",
735 NIPQUAD(ip_hdr(skb)->saddr),
736 icmph->type, icmph->code,
742 /* Checkin full IP header plus 8 bytes of protocol to
743 * avoid additional coding at protocol handlers.
745 if (!pskb_may_pull(skb, iph->ihl * 4 + 8))
748 iph = (struct iphdr *)skb->data;
749 protocol = iph->protocol;
752 * Deliver ICMP message to raw sockets. Pretty useless feature?
754 raw_icmp_error(skb, protocol, info);
756 hash = protocol & (MAX_INET_PROTOS - 1);
758 ipprot = rcu_dereference(inet_protos[hash]);
759 if (ipprot && ipprot->err_handler)
760 ipprot->err_handler(skb, info);
766 ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
772 * Handle ICMP_REDIRECT.
775 static void icmp_redirect(struct sk_buff *skb)
779 if (skb->len < sizeof(struct iphdr))
783 * Get the copied header of the packet that caused the redirect
785 if (!pskb_may_pull(skb, sizeof(struct iphdr)))
788 iph = (struct iphdr *)skb->data;
790 switch (icmp_hdr(skb)->code & 7) {
792 case ICMP_REDIR_NETTOS:
794 * As per RFC recommendations now handle it as a host redirect.
796 case ICMP_REDIR_HOST:
797 case ICMP_REDIR_HOSTTOS:
798 ip_rt_redirect(ip_hdr(skb)->saddr, iph->daddr,
799 icmp_hdr(skb)->un.gateway,
800 iph->saddr, skb->dev);
806 ICMP_INC_STATS_BH(dev_net(skb->dev), ICMP_MIB_INERRORS);
811 * Handle ICMP_ECHO ("ping") requests.
813 * RFC 1122: 3.2.2.6 MUST have an echo server that answers ICMP echo
815 * RFC 1122: 3.2.2.6 Data received in the ICMP_ECHO request MUST be
816 * included in the reply.
817 * RFC 1812: 4.3.3.6 SHOULD have a config option for silently ignoring
818 * echo requests, MUST have default=NOT.
819 * See also WRT handling of options once they are done and working.
822 static void icmp_echo(struct sk_buff *skb)
826 net = dev_net(skb->dst->dev);
827 if (!net->ipv4.sysctl_icmp_echo_ignore_all) {
828 struct icmp_bxm icmp_param;
830 icmp_param.data.icmph = *icmp_hdr(skb);
831 icmp_param.data.icmph.type = ICMP_ECHOREPLY;
832 icmp_param.skb = skb;
833 icmp_param.offset = 0;
834 icmp_param.data_len = skb->len;
835 icmp_param.head_len = sizeof(struct icmphdr);
836 icmp_reply(&icmp_param, skb);
841 * Handle ICMP Timestamp requests.
842 * RFC 1122: 3.2.2.8 MAY implement ICMP timestamp requests.
843 * SHOULD be in the kernel for minimum random latency.
844 * MUST be accurate to a few minutes.
845 * MUST be updated at least at 15Hz.
847 static void icmp_timestamp(struct sk_buff *skb)
850 struct icmp_bxm icmp_param;
858 * Fill in the current time as ms since midnight UT:
861 icmp_param.data.times[1] = htonl((tv.tv_sec % 86400) * MSEC_PER_SEC +
862 tv.tv_nsec / NSEC_PER_MSEC);
863 icmp_param.data.times[2] = icmp_param.data.times[1];
864 if (skb_copy_bits(skb, 0, &icmp_param.data.times[0], 4))
866 icmp_param.data.icmph = *icmp_hdr(skb);
867 icmp_param.data.icmph.type = ICMP_TIMESTAMPREPLY;
868 icmp_param.data.icmph.code = 0;
869 icmp_param.skb = skb;
870 icmp_param.offset = 0;
871 icmp_param.data_len = 0;
872 icmp_param.head_len = sizeof(struct icmphdr) + 12;
873 icmp_reply(&icmp_param, skb);
877 ICMP_INC_STATS_BH(dev_net(skb->dst->dev), ICMP_MIB_INERRORS);
883 * Handle ICMP_ADDRESS_MASK requests. (RFC950)
885 * RFC1122 (3.2.2.9). A host MUST only send replies to
886 * ADDRESS_MASK requests if it's been configured as an address mask
887 * agent. Receiving a request doesn't constitute implicit permission to
888 * act as one. Of course, implementing this correctly requires (SHOULD)
889 * a way to turn the functionality on and off. Another one for sysctl(),
892 * RFC1812 (4.3.3.9). A router MUST implement it.
893 * A router SHOULD have switch turning it on/off.
894 * This switch MUST be ON by default.
896 * Gratuitous replies, zero-source replies are not implemented,
897 * that complies with RFC. DO NOT implement them!!! All the idea
898 * of broadcast addrmask replies as specified in RFC950 is broken.
899 * The problem is that it is not uncommon to have several prefixes
900 * on one physical interface. Moreover, addrmask agent can even be
901 * not aware of existing another prefixes.
902 * If source is zero, addrmask agent cannot choose correct prefix.
903 * Gratuitous mask announcements suffer from the same problem.
904 * RFC1812 explains it, but still allows to use ADDRMASK,
905 * that is pretty silly. --ANK
907 * All these rules are so bizarre, that I removed kernel addrmask
908 * support at all. It is wrong, it is obsolete, nobody uses it in
911 * Furthermore you can do it with a usermode address agent program
915 static void icmp_address(struct sk_buff *skb)
919 printk(KERN_DEBUG "a guy asks for address mask. Who is it?\n");
924 * RFC1812 (4.3.3.9). A router SHOULD listen all replies, and complain
925 * loudly if an inconsistency is found.
928 static void icmp_address_reply(struct sk_buff *skb)
930 struct rtable *rt = skb->rtable;
931 struct net_device *dev = skb->dev;
932 struct in_device *in_dev;
933 struct in_ifaddr *ifa;
935 if (skb->len < 4 || !(rt->rt_flags&RTCF_DIRECTSRC))
938 in_dev = in_dev_get(dev);
942 if (in_dev->ifa_list &&
943 IN_DEV_LOG_MARTIANS(in_dev) &&
944 IN_DEV_FORWARD(in_dev)) {
947 mp = skb_header_pointer(skb, 0, sizeof(_mask), &_mask);
949 for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
950 if (*mp == ifa->ifa_mask &&
951 inet_ifa_match(rt->rt_src, ifa))
954 if (!ifa && net_ratelimit()) {
955 printk(KERN_INFO "Wrong address mask " NIPQUAD_FMT " from "
956 "%s/" NIPQUAD_FMT "\n",
957 NIPQUAD(*mp), dev->name, NIPQUAD(rt->rt_src));
965 static void icmp_discard(struct sk_buff *skb)
970 * Deal with incoming ICMP packets.
972 int icmp_rcv(struct sk_buff *skb)
974 struct icmphdr *icmph;
975 struct rtable *rt = skb->rtable;
976 struct net *net = dev_net(rt->u.dst.dev);
978 if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
979 struct sec_path *sp = skb_sec_path(skb);
982 if (!(sp && sp->xvec[sp->len - 1]->props.flags &
986 if (!pskb_may_pull(skb, sizeof(*icmph) + sizeof(struct iphdr)))
989 nh = skb_network_offset(skb);
990 skb_set_network_header(skb, sizeof(*icmph));
992 if (!xfrm4_policy_check_reverse(NULL, XFRM_POLICY_IN, skb))
995 skb_set_network_header(skb, nh);
998 ICMP_INC_STATS_BH(net, ICMP_MIB_INMSGS);
1000 switch (skb->ip_summed) {
1001 case CHECKSUM_COMPLETE:
1002 if (!csum_fold(skb->csum))
1007 if (__skb_checksum_complete(skb))
1011 if (!pskb_pull(skb, sizeof(*icmph)))
1014 icmph = icmp_hdr(skb);
1016 ICMPMSGIN_INC_STATS_BH(net, icmph->type);
1018 * 18 is the highest 'known' ICMP type. Anything else is a mystery
1020 * RFC 1122: 3.2.2 Unknown ICMP messages types MUST be silently
1023 if (icmph->type > NR_ICMP_TYPES)
1028 * Parse the ICMP message
1031 if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) {
1033 * RFC 1122: 3.2.2.6 An ICMP_ECHO to broadcast MAY be
1034 * silently ignored (we let user decide with a sysctl).
1035 * RFC 1122: 3.2.2.8 An ICMP_TIMESTAMP MAY be silently
1036 * discarded if to broadcast/multicast.
1038 if ((icmph->type == ICMP_ECHO ||
1039 icmph->type == ICMP_TIMESTAMP) &&
1040 net->ipv4.sysctl_icmp_echo_ignore_broadcasts) {
1043 if (icmph->type != ICMP_ECHO &&
1044 icmph->type != ICMP_TIMESTAMP &&
1045 icmph->type != ICMP_ADDRESS &&
1046 icmph->type != ICMP_ADDRESSREPLY) {
1051 icmp_pointers[icmph->type].handler(skb);
1057 ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
1062 * This table is the definition of how we handle ICMP.
1064 static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
1065 [ICMP_ECHOREPLY] = {
1066 .handler = icmp_discard,
1069 .handler = icmp_discard,
1073 .handler = icmp_discard,
1076 [ICMP_DEST_UNREACH] = {
1077 .handler = icmp_unreach,
1080 [ICMP_SOURCE_QUENCH] = {
1081 .handler = icmp_unreach,
1085 .handler = icmp_redirect,
1089 .handler = icmp_discard,
1093 .handler = icmp_discard,
1097 .handler = icmp_echo,
1100 .handler = icmp_discard,
1104 .handler = icmp_discard,
1107 [ICMP_TIME_EXCEEDED] = {
1108 .handler = icmp_unreach,
1111 [ICMP_PARAMETERPROB] = {
1112 .handler = icmp_unreach,
1115 [ICMP_TIMESTAMP] = {
1116 .handler = icmp_timestamp,
1118 [ICMP_TIMESTAMPREPLY] = {
1119 .handler = icmp_discard,
1121 [ICMP_INFO_REQUEST] = {
1122 .handler = icmp_discard,
1124 [ICMP_INFO_REPLY] = {
1125 .handler = icmp_discard,
1128 .handler = icmp_address,
1130 [ICMP_ADDRESSREPLY] = {
1131 .handler = icmp_address_reply,
1135 static void __net_exit icmp_sk_exit(struct net *net)
1139 for_each_possible_cpu(i)
1140 inet_ctl_sock_destroy(net->ipv4.icmp_sk[i]);
1141 kfree(net->ipv4.icmp_sk);
1142 net->ipv4.icmp_sk = NULL;
1145 static int __net_init icmp_sk_init(struct net *net)
1150 kzalloc(nr_cpu_ids * sizeof(struct sock *), GFP_KERNEL);
1151 if (net->ipv4.icmp_sk == NULL)
1154 for_each_possible_cpu(i) {
1157 err = inet_ctl_sock_create(&sk, PF_INET,
1158 SOCK_RAW, IPPROTO_ICMP, net);
1162 net->ipv4.icmp_sk[i] = sk;
1164 /* Enough space for 2 64K ICMP packets, including
1165 * sk_buff struct overhead.
1168 (2 * ((64 * 1024) + sizeof(struct sk_buff)));
1170 inet_sk(sk)->pmtudisc = IP_PMTUDISC_DONT;
1173 /* Control parameters for ECHO replies. */
1174 net->ipv4.sysctl_icmp_echo_ignore_all = 0;
1175 net->ipv4.sysctl_icmp_echo_ignore_broadcasts = 1;
1177 /* Control parameter - ignore bogus broadcast responses? */
1178 net->ipv4.sysctl_icmp_ignore_bogus_error_responses = 1;
1181 * Configurable global rate limit.
1183 * ratelimit defines tokens/packet consumed for dst->rate_token
1184 * bucket ratemask defines which icmp types are ratelimited by
1185 * setting it's bit position.
1188 * dest unreachable (3), source quench (4),
1189 * time exceeded (11), parameter problem (12)
1192 net->ipv4.sysctl_icmp_ratelimit = 1 * HZ;
1193 net->ipv4.sysctl_icmp_ratemask = 0x1818;
1194 net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr = 0;
1199 for_each_possible_cpu(i)
1200 inet_ctl_sock_destroy(net->ipv4.icmp_sk[i]);
1201 kfree(net->ipv4.icmp_sk);
1205 static struct pernet_operations __net_initdata icmp_sk_ops = {
1206 .init = icmp_sk_init,
1207 .exit = icmp_sk_exit,
1210 int __init icmp_init(void)
1212 return register_pernet_device(&icmp_sk_ops);
1215 EXPORT_SYMBOL(icmp_err_convert);
1216 EXPORT_SYMBOL(icmp_send);
1217 EXPORT_SYMBOL(xrlim_allow);