]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - include/linux/interrupt.h
Merge branches 'pxa' and 'orion-fixes1'
[linux-2.6-omap-h63xx.git] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <linux/irqflags.h>
14 #include <asm/atomic.h>
15 #include <asm/ptrace.h>
16 #include <asm/system.h>
17
18 /*
19  * These correspond to the IORESOURCE_IRQ_* defines in
20  * linux/ioport.h to select the interrupt line behaviour.  When
21  * requesting an interrupt without specifying a IRQF_TRIGGER, the
22  * setting should be assumed to be "as already configured", which
23  * may be as per machine or firmware initialisation.
24  */
25 #define IRQF_TRIGGER_NONE       0x00000000
26 #define IRQF_TRIGGER_RISING     0x00000001
27 #define IRQF_TRIGGER_FALLING    0x00000002
28 #define IRQF_TRIGGER_HIGH       0x00000004
29 #define IRQF_TRIGGER_LOW        0x00000008
30 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
31                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
32 #define IRQF_TRIGGER_PROBE      0x00000010
33
34 /*
35  * These flags used only by the kernel as part of the
36  * irq handling routines.
37  *
38  * IRQF_DISABLED - keep irqs disabled when calling the action handler
39  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
40  * IRQF_SHARED - allow sharing the irq among several devices
41  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
42  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
43  * IRQF_PERCPU - Interrupt is per cpu
44  * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
45  * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
46  *                registered first in an shared interrupt is considered for
47  *                performance reasons)
48  */
49 #define IRQF_DISABLED           0x00000020
50 #define IRQF_SAMPLE_RANDOM      0x00000040
51 #define IRQF_SHARED             0x00000080
52 #define IRQF_PROBE_SHARED       0x00000100
53 #define IRQF_TIMER              0x00000200
54 #define IRQF_PERCPU             0x00000400
55 #define IRQF_NOBALANCING        0x00000800
56 #define IRQF_IRQPOLL            0x00001000
57
58 typedef irqreturn_t (*irq_handler_t)(int, void *);
59
60 struct irqaction {
61         irq_handler_t handler;
62         unsigned long flags;
63         cpumask_t mask;
64         const char *name;
65         void *dev_id;
66         struct irqaction *next;
67         int irq;
68         struct proc_dir_entry *dir;
69 };
70
71 extern irqreturn_t no_action(int cpl, void *dev_id);
72 extern int __must_check request_irq(unsigned int, irq_handler_t handler,
73                        unsigned long, const char *, void *);
74 extern void free_irq(unsigned int, void *);
75
76 struct device;
77
78 extern int __must_check devm_request_irq(struct device *dev, unsigned int irq,
79                             irq_handler_t handler, unsigned long irqflags,
80                             const char *devname, void *dev_id);
81 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
82
83 /*
84  * On lockdep we dont want to enable hardirqs in hardirq
85  * context. Use local_irq_enable_in_hardirq() to annotate
86  * kernel code that has to do this nevertheless (pretty much
87  * the only valid case is for old/broken hardware that is
88  * insanely slow).
89  *
90  * NOTE: in theory this might break fragile code that relies
91  * on hardirq delivery - in practice we dont seem to have such
92  * places left. So the only effect should be slightly increased
93  * irqs-off latencies.
94  */
95 #ifdef CONFIG_LOCKDEP
96 # define local_irq_enable_in_hardirq()  do { } while (0)
97 #else
98 # define local_irq_enable_in_hardirq()  local_irq_enable()
99 #endif
100
101 extern void disable_irq_nosync(unsigned int irq);
102 extern void disable_irq(unsigned int irq);
103 extern void enable_irq(unsigned int irq);
104
105 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
106
107 extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
108 extern int irq_can_set_affinity(unsigned int irq);
109
110 #else /* CONFIG_SMP */
111
112 static inline int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
113 {
114         return -EINVAL;
115 }
116
117 static inline int irq_can_set_affinity(unsigned int irq)
118 {
119         return 0;
120 }
121
122 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
123
124 #ifdef CONFIG_GENERIC_HARDIRQS
125 /*
126  * Special lockdep variants of irq disabling/enabling.
127  * These should be used for locking constructs that
128  * know that a particular irq context which is disabled,
129  * and which is the only irq-context user of a lock,
130  * that it's safe to take the lock in the irq-disabled
131  * section without disabling hardirqs.
132  *
133  * On !CONFIG_LOCKDEP they are equivalent to the normal
134  * irq disable/enable methods.
135  */
136 static inline void disable_irq_nosync_lockdep(unsigned int irq)
137 {
138         disable_irq_nosync(irq);
139 #ifdef CONFIG_LOCKDEP
140         local_irq_disable();
141 #endif
142 }
143
144 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
145 {
146         disable_irq_nosync(irq);
147 #ifdef CONFIG_LOCKDEP
148         local_irq_save(*flags);
149 #endif
150 }
151
152 static inline void disable_irq_lockdep(unsigned int irq)
153 {
154         disable_irq(irq);
155 #ifdef CONFIG_LOCKDEP
156         local_irq_disable();
157 #endif
158 }
159
160 static inline void enable_irq_lockdep(unsigned int irq)
161 {
162 #ifdef CONFIG_LOCKDEP
163         local_irq_enable();
164 #endif
165         enable_irq(irq);
166 }
167
168 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
169 {
170 #ifdef CONFIG_LOCKDEP
171         local_irq_restore(*flags);
172 #endif
173         enable_irq(irq);
174 }
175
176 /* IRQ wakeup (PM) control: */
177 extern int set_irq_wake(unsigned int irq, unsigned int on);
178
179 static inline int enable_irq_wake(unsigned int irq)
180 {
181         return set_irq_wake(irq, 1);
182 }
183
184 static inline int disable_irq_wake(unsigned int irq)
185 {
186         return set_irq_wake(irq, 0);
187 }
188
189 #else /* !CONFIG_GENERIC_HARDIRQS */
190 /*
191  * NOTE: non-genirq architectures, if they want to support the lock
192  * validator need to define the methods below in their asm/irq.h
193  * files, under an #ifdef CONFIG_LOCKDEP section.
194  */
195 #ifndef CONFIG_LOCKDEP
196 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
197 #  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
198                                                 disable_irq_nosync(irq)
199 #  define disable_irq_lockdep(irq)              disable_irq(irq)
200 #  define enable_irq_lockdep(irq)               enable_irq(irq)
201 #  define enable_irq_lockdep_irqrestore(irq, flags) \
202                                                 enable_irq(irq)
203 # endif
204
205 static inline int enable_irq_wake(unsigned int irq)
206 {
207         return 0;
208 }
209
210 static inline int disable_irq_wake(unsigned int irq)
211 {
212         return 0;
213 }
214 #endif /* CONFIG_GENERIC_HARDIRQS */
215
216 #ifndef __ARCH_SET_SOFTIRQ_PENDING
217 #define set_softirq_pending(x) (local_softirq_pending() = (x))
218 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
219 #endif
220
221 /*
222  * Temporary defines for UP kernels, until all code gets fixed.
223  */
224 #ifndef CONFIG_SMP
225 static inline void __deprecated cli(void)
226 {
227         local_irq_disable();
228 }
229 static inline void __deprecated sti(void)
230 {
231         local_irq_enable();
232 }
233 static inline void __deprecated save_flags(unsigned long *x)
234 {
235         local_save_flags(*x);
236 }
237 #define save_flags(x) save_flags(&x)
238 static inline void __deprecated restore_flags(unsigned long x)
239 {
240         local_irq_restore(x);
241 }
242
243 static inline void __deprecated save_and_cli(unsigned long *x)
244 {
245         local_irq_save(*x);
246 }
247 #define save_and_cli(x) save_and_cli(&x)
248 #endif /* CONFIG_SMP */
249
250 /* Some architectures might implement lazy enabling/disabling of
251  * interrupts. In some cases, such as stop_machine, we might want
252  * to ensure that after a local_irq_disable(), interrupts have
253  * really been disabled in hardware. Such architectures need to
254  * implement the following hook.
255  */
256 #ifndef hard_irq_disable
257 #define hard_irq_disable()      do { } while(0)
258 #endif
259
260 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
261    frequency threaded job scheduling. For almost all the purposes
262    tasklets are more than enough. F.e. all serial device BHs et
263    al. should be converted to tasklets, not to softirqs.
264  */
265
266 enum
267 {
268         HI_SOFTIRQ=0,
269         TIMER_SOFTIRQ,
270         NET_TX_SOFTIRQ,
271         NET_RX_SOFTIRQ,
272         BLOCK_SOFTIRQ,
273         TASKLET_SOFTIRQ,
274         SCHED_SOFTIRQ,
275 #ifdef CONFIG_HIGH_RES_TIMERS
276         HRTIMER_SOFTIRQ,
277 #endif
278         RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
279 };
280
281 /* softirq mask and active fields moved to irq_cpustat_t in
282  * asm/hardirq.h to get better cache usage.  KAO
283  */
284
285 struct softirq_action
286 {
287         void    (*action)(struct softirq_action *);
288         void    *data;
289 };
290
291 asmlinkage void do_softirq(void);
292 extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
293 extern void softirq_init(void);
294 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
295 extern void raise_softirq_irqoff(unsigned int nr);
296 extern void raise_softirq(unsigned int nr);
297
298
299 /* Tasklets --- multithreaded analogue of BHs.
300
301    Main feature differing them of generic softirqs: tasklet
302    is running only on one CPU simultaneously.
303
304    Main feature differing them of BHs: different tasklets
305    may be run simultaneously on different CPUs.
306
307    Properties:
308    * If tasklet_schedule() is called, then tasklet is guaranteed
309      to be executed on some cpu at least once after this.
310    * If the tasklet is already scheduled, but its excecution is still not
311      started, it will be executed only once.
312    * If this tasklet is already running on another CPU (or schedule is called
313      from tasklet itself), it is rescheduled for later.
314    * Tasklet is strictly serialized wrt itself, but not
315      wrt another tasklets. If client needs some intertask synchronization,
316      he makes it with spinlocks.
317  */
318
319 struct tasklet_struct
320 {
321         struct tasklet_struct *next;
322         unsigned long state;
323         atomic_t count;
324         void (*func)(unsigned long);
325         unsigned long data;
326 };
327
328 #define DECLARE_TASKLET(name, func, data) \
329 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
330
331 #define DECLARE_TASKLET_DISABLED(name, func, data) \
332 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
333
334
335 enum
336 {
337         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
338         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
339 };
340
341 #ifdef CONFIG_SMP
342 static inline int tasklet_trylock(struct tasklet_struct *t)
343 {
344         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
345 }
346
347 static inline void tasklet_unlock(struct tasklet_struct *t)
348 {
349         smp_mb__before_clear_bit(); 
350         clear_bit(TASKLET_STATE_RUN, &(t)->state);
351 }
352
353 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
354 {
355         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
356 }
357 #else
358 #define tasklet_trylock(t) 1
359 #define tasklet_unlock_wait(t) do { } while (0)
360 #define tasklet_unlock(t) do { } while (0)
361 #endif
362
363 extern void __tasklet_schedule(struct tasklet_struct *t);
364
365 static inline void tasklet_schedule(struct tasklet_struct *t)
366 {
367         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
368                 __tasklet_schedule(t);
369 }
370
371 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
372
373 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
374 {
375         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
376                 __tasklet_hi_schedule(t);
377 }
378
379
380 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
381 {
382         atomic_inc(&t->count);
383         smp_mb__after_atomic_inc();
384 }
385
386 static inline void tasklet_disable(struct tasklet_struct *t)
387 {
388         tasklet_disable_nosync(t);
389         tasklet_unlock_wait(t);
390         smp_mb();
391 }
392
393 static inline void tasklet_enable(struct tasklet_struct *t)
394 {
395         smp_mb__before_atomic_dec();
396         atomic_dec(&t->count);
397 }
398
399 static inline void tasklet_hi_enable(struct tasklet_struct *t)
400 {
401         smp_mb__before_atomic_dec();
402         atomic_dec(&t->count);
403 }
404
405 extern void tasklet_kill(struct tasklet_struct *t);
406 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
407 extern void tasklet_init(struct tasklet_struct *t,
408                          void (*func)(unsigned long), unsigned long data);
409
410 /*
411  * Autoprobing for irqs:
412  *
413  * probe_irq_on() and probe_irq_off() provide robust primitives
414  * for accurate IRQ probing during kernel initialization.  They are
415  * reasonably simple to use, are not "fooled" by spurious interrupts,
416  * and, unlike other attempts at IRQ probing, they do not get hung on
417  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
418  *
419  * For reasonably foolproof probing, use them as follows:
420  *
421  * 1. clear and/or mask the device's internal interrupt.
422  * 2. sti();
423  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
424  * 4. enable the device and cause it to trigger an interrupt.
425  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
426  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
427  * 7. service the device to clear its pending interrupt.
428  * 8. loop again if paranoia is required.
429  *
430  * probe_irq_on() returns a mask of allocated irq's.
431  *
432  * probe_irq_off() takes the mask as a parameter,
433  * and returns the irq number which occurred,
434  * or zero if none occurred, or a negative irq number
435  * if more than one irq occurred.
436  */
437
438 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
439 static inline unsigned long probe_irq_on(void)
440 {
441         return 0;
442 }
443 static inline int probe_irq_off(unsigned long val)
444 {
445         return 0;
446 }
447 static inline unsigned int probe_irq_mask(unsigned long val)
448 {
449         return 0;
450 }
451 #else
452 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
453 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
454 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
455 #endif
456
457 #ifdef CONFIG_PROC_FS
458 /* Initialize /proc/irq/ */
459 extern void init_irq_proc(void);
460 #else
461 static inline void init_irq_proc(void)
462 {
463 }
464 #endif
465
466 int show_interrupts(struct seq_file *p, void *v);
467
468 #endif