]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - include/linux/ide.h
7fd1ec135510d37a7c7f248afd1505bbbe98e621
[linux-2.6-omap-h63xx.git] / include / linux / ide.h
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4  *  linux/include/linux/ide.h
5  *
6  *  Copyright (C) 1994-2002  Linus Torvalds & authors
7  */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/ata.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #include <linux/pm.h>
21 #ifdef CONFIG_BLK_DEV_IDEACPI
22 #include <acpi/acpi.h>
23 #endif
24 #include <asm/byteorder.h>
25 #include <asm/system.h>
26 #include <asm/io.h>
27 #include <asm/mutex.h>
28
29 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
30 # define SUPPORT_VLB_SYNC 0
31 #else
32 # define SUPPORT_VLB_SYNC 1
33 #endif
34
35 /*
36  * Used to indicate "no IRQ", should be a value that cannot be an IRQ
37  * number.
38  */
39  
40 #define IDE_NO_IRQ              (-1)
41
42 typedef unsigned char   byte;   /* used everywhere */
43
44 /*
45  * Probably not wise to fiddle with these
46  */
47 #define ERROR_MAX       8       /* Max read/write errors per sector */
48 #define ERROR_RESET     3       /* Reset controller every 4th retry */
49 #define ERROR_RECAL     1       /* Recalibrate every 2nd retry */
50
51 #define HWIF(drive)             ((ide_hwif_t *)((drive)->hwif))
52 #define HWGROUP(drive)          ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
53
54 /*
55  * Definitions for accessing IDE controller registers
56  */
57 #define IDE_NR_PORTS            (10)
58
59 struct ide_io_ports {
60         unsigned long   data_addr;
61
62         union {
63                 unsigned long error_addr;       /*   read:  error */
64                 unsigned long feature_addr;     /*  write: feature */
65         };
66
67         unsigned long   nsect_addr;
68         unsigned long   lbal_addr;
69         unsigned long   lbam_addr;
70         unsigned long   lbah_addr;
71
72         unsigned long   device_addr;
73
74         union {
75                 unsigned long status_addr;      /*  read: status  */
76                 unsigned long command_addr;     /* write: command */
77         };
78
79         unsigned long   ctl_addr;
80
81         unsigned long   irq_addr;
82 };
83
84 #define OK_STAT(stat,good,bad)  (((stat)&((good)|(bad)))==(good))
85
86 #define BAD_R_STAT      (ATA_BUSY | ATA_ERR)
87 #define BAD_W_STAT      (BAD_R_STAT | ATA_DF)
88 #define BAD_STAT        (BAD_R_STAT | ATA_DRQ)
89 #define DRIVE_READY     (ATA_DRDY | ATA_DSC)
90
91 #define BAD_CRC         (ATA_ABORTED | ATA_ICRC)
92
93 #define SATA_NR_PORTS           (3)     /* 16 possible ?? */
94
95 #define SATA_STATUS_OFFSET      (0)
96 #define SATA_ERROR_OFFSET       (1)
97 #define SATA_CONTROL_OFFSET     (2)
98
99 /*
100  * Our Physical Region Descriptor (PRD) table should be large enough
101  * to handle the biggest I/O request we are likely to see.  Since requests
102  * can have no more than 256 sectors, and since the typical blocksize is
103  * two or more sectors, we could get by with a limit of 128 entries here for
104  * the usual worst case.  Most requests seem to include some contiguous blocks,
105  * further reducing the number of table entries required.
106  *
107  * The driver reverts to PIO mode for individual requests that exceed
108  * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
109  * 100% of all crazy scenarios here is not necessary.
110  *
111  * As it turns out though, we must allocate a full 4KB page for this,
112  * so the two PRD tables (ide0 & ide1) will each get half of that,
113  * allowing each to have about 256 entries (8 bytes each) from this.
114  */
115 #define PRD_BYTES       8
116 #define PRD_ENTRIES     256
117
118 /*
119  * Some more useful definitions
120  */
121 #define PARTN_BITS      6       /* number of minor dev bits for partitions */
122 #define MAX_DRIVES      2       /* per interface; 2 assumed by lots of code */
123 #define SECTOR_SIZE     512
124
125 #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
126
127 /*
128  * Timeouts for various operations:
129  */
130 enum {
131         /* spec allows up to 20ms */
132         WAIT_DRQ        = HZ / 10,      /* 100ms */
133         /* some laptops are very slow */
134         WAIT_READY      = 5 * HZ,       /* 5s */
135         /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
136         WAIT_PIDENTIFY  = 10 * HZ,      /* 10s */
137         /* worst case when spinning up */
138         WAIT_WORSTCASE  = 30 * HZ,      /* 30s */
139         /* maximum wait for an IRQ to happen */
140         WAIT_CMD        = 10 * HZ,      /* 10s */
141         /* Some drives require a longer IRQ timeout. */
142         WAIT_FLOPPY_CMD = 50 * HZ,      /* 50s */
143         /*
144          * Some drives (for example, Seagate STT3401A Travan) require a very
145          * long timeout, because they don't return an interrupt or clear their
146          * BSY bit until after the command completes (even retension commands).
147          */
148         WAIT_TAPE_CMD   = 900 * HZ,     /* 900s */
149         /* minimum sleep time */
150         WAIT_MIN_SLEEP  = HZ / 50,      /* 20ms */
151 };
152
153 /*
154  * Op codes for special requests to be handled by ide_special_rq().
155  * Values should be in the range of 0x20 to 0x3f.
156  */
157 #define REQ_DRIVE_RESET         0x20
158 #define REQ_DEVSET_EXEC         0x21
159
160 /*
161  * Check for an interrupt and acknowledge the interrupt status
162  */
163 struct hwif_s;
164 typedef int (ide_ack_intr_t)(struct hwif_s *);
165
166 /*
167  * hwif_chipset_t is used to keep track of the specific hardware
168  * chipset used by each IDE interface, if known.
169  */
170 enum {          ide_unknown,    ide_generic,    ide_pci,
171                 ide_cmd640,     ide_dtc2278,    ide_ali14xx,
172                 ide_qd65xx,     ide_umc8672,    ide_ht6560b,
173                 ide_rz1000,     ide_trm290,
174                 ide_cmd646,     ide_cy82c693,   ide_4drives,
175                 ide_pmac,       ide_acorn,
176                 ide_au1xxx,     ide_palm3710
177 };
178
179 typedef u8 hwif_chipset_t;
180
181 /*
182  * Structure to hold all information about the location of this port
183  */
184 typedef struct hw_regs_s {
185         union {
186                 struct ide_io_ports     io_ports;
187                 unsigned long           io_ports_array[IDE_NR_PORTS];
188         };
189
190         int             irq;                    /* our irq number */
191         ide_ack_intr_t  *ack_intr;              /* acknowledge interrupt */
192         hwif_chipset_t  chipset;
193         struct device   *dev, *parent;
194         unsigned long   config;
195 } hw_regs_t;
196
197 void ide_init_port_data(struct hwif_s *, unsigned int);
198 void ide_init_port_hw(struct hwif_s *, hw_regs_t *);
199
200 static inline void ide_std_init_ports(hw_regs_t *hw,
201                                       unsigned long io_addr,
202                                       unsigned long ctl_addr)
203 {
204         unsigned int i;
205
206         for (i = 0; i <= 7; i++)
207                 hw->io_ports_array[i] = io_addr++;
208
209         hw->io_ports.ctl_addr = ctl_addr;
210 }
211
212 /* for IDE PCI controllers in legacy mode, temporary */
213 static inline int __ide_default_irq(unsigned long base)
214 {
215         switch (base) {
216 #ifdef CONFIG_IA64
217         case 0x1f0: return isa_irq_to_vector(14);
218         case 0x170: return isa_irq_to_vector(15);
219 #else
220         case 0x1f0: return 14;
221         case 0x170: return 15;
222 #endif
223         }
224         return 0;
225 }
226
227 #if defined(CONFIG_ARM) || defined(CONFIG_FRV) || defined(CONFIG_M68K) || \
228     defined(CONFIG_MIPS) || defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \
229     || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)
230 #include <asm/ide.h>
231 #else
232 #include <asm-generic/ide_iops.h>
233 #endif
234
235 #define MAX_HWIFS       10
236
237 /* Currently only m68k, apus and m8xx need it */
238 #ifndef IDE_ARCH_ACK_INTR
239 # define ide_ack_intr(hwif) (1)
240 #endif
241
242 /* Currently only Atari needs it */
243 #ifndef IDE_ARCH_LOCK
244 # define ide_release_lock()                     do {} while (0)
245 # define ide_get_lock(hdlr, data)               do {} while (0)
246 #endif /* IDE_ARCH_LOCK */
247
248 /*
249  * Now for the data we need to maintain per-drive:  ide_drive_t
250  */
251
252 #define ide_scsi        0x21
253 #define ide_disk        0x20
254 #define ide_optical     0x7
255 #define ide_cdrom       0x5
256 #define ide_tape        0x1
257 #define ide_floppy      0x0
258
259 /*
260  * Special Driver Flags
261  *
262  * set_geometry : respecify drive geometry
263  * recalibrate  : seek to cyl 0
264  * set_multmode : set multmode count
265  * set_tune     : tune interface for drive
266  * serviced     : service command
267  * reserved     : unused
268  */
269 typedef union {
270         unsigned all                    : 8;
271         struct {
272                 unsigned set_geometry   : 1;
273                 unsigned recalibrate    : 1;
274                 unsigned set_multmode   : 1;
275                 unsigned set_tune       : 1;
276                 unsigned serviced       : 1;
277                 unsigned reserved       : 3;
278         } b;
279 } special_t;
280
281 /*
282  * ATA-IDE Select Register, aka Device-Head
283  *
284  * head         : always zeros here
285  * unit         : drive select number: 0/1
286  * bit5         : always 1
287  * lba          : using LBA instead of CHS
288  * bit7         : always 1
289  */
290 typedef union {
291         unsigned all                    : 8;
292         struct {
293 #if defined(__LITTLE_ENDIAN_BITFIELD)
294                 unsigned head           : 4;
295                 unsigned unit           : 1;
296                 unsigned bit5           : 1;
297                 unsigned lba            : 1;
298                 unsigned bit7           : 1;
299 #elif defined(__BIG_ENDIAN_BITFIELD)
300                 unsigned bit7           : 1;
301                 unsigned lba            : 1;
302                 unsigned bit5           : 1;
303                 unsigned unit           : 1;
304                 unsigned head           : 4;
305 #else
306 #error "Please fix <asm/byteorder.h>"
307 #endif
308         } b;
309 } select_t, ata_select_t;
310
311 /*
312  * Status returned from various ide_ functions
313  */
314 typedef enum {
315         ide_stopped,    /* no drive operation was started */
316         ide_started,    /* a drive operation was started, handler was set */
317 } ide_startstop_t;
318
319 /* ATAPI packet command flags */
320 enum {
321         /* set when an error is considered normal - no retry (ide-tape) */
322         PC_FLAG_ABORT                   = (1 << 0),
323         PC_FLAG_SUPPRESS_ERROR          = (1 << 1),
324         PC_FLAG_WAIT_FOR_DSC            = (1 << 2),
325         PC_FLAG_DMA_OK                  = (1 << 3),
326         PC_FLAG_DMA_IN_PROGRESS         = (1 << 4),
327         PC_FLAG_DMA_ERROR               = (1 << 5),
328         PC_FLAG_WRITING                 = (1 << 6),
329         /* command timed out */
330         PC_FLAG_TIMEDOUT                = (1 << 7),
331 };
332
333 /*
334  * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
335  * This is used for several packet commands (not for READ/WRITE commands).
336  */
337 #define IDE_PC_BUFFER_SIZE      256
338
339 struct ide_atapi_pc {
340         /* actual packet bytes */
341         u8 c[12];
342         /* incremented on each retry */
343         int retries;
344         int error;
345
346         /* bytes to transfer */
347         int req_xfer;
348         /* bytes actually transferred */
349         int xferred;
350
351         /* data buffer */
352         u8 *buf;
353         /* current buffer position */
354         u8 *cur_pos;
355         int buf_size;
356         /* missing/available data on the current buffer */
357         int b_count;
358
359         /* the corresponding request */
360         struct request *rq;
361
362         unsigned long flags;
363
364         /*
365          * those are more or less driver-specific and some of them are subject
366          * to change/removal later.
367          */
368         u8 pc_buf[IDE_PC_BUFFER_SIZE];
369
370         /* idetape only */
371         struct idetape_bh *bh;
372         char *b_data;
373
374         /* idescsi only for now */
375         struct scatterlist *sg;
376         unsigned int sg_cnt;
377
378         struct scsi_cmnd *scsi_cmd;
379         void (*done) (struct scsi_cmnd *);
380
381         unsigned long timeout;
382 };
383
384 struct ide_devset;
385 struct ide_driver_s;
386
387 #ifdef CONFIG_BLK_DEV_IDEACPI
388 struct ide_acpi_drive_link;
389 struct ide_acpi_hwif_link;
390 #endif
391
392 /* ATAPI device flags */
393 enum {
394         IDE_AFLAG_DRQ_INTERRUPT         = (1 << 0),
395         IDE_AFLAG_MEDIA_CHANGED         = (1 << 1),
396         /* Drive cannot lock the door. */
397         IDE_AFLAG_NO_DOORLOCK           = (1 << 2),
398
399         /* ide-cd */
400         /* Drive cannot eject the disc. */
401         IDE_AFLAG_NO_EJECT              = (1 << 3),
402         /* Drive is a pre ATAPI 1.2 drive. */
403         IDE_AFLAG_PRE_ATAPI12           = (1 << 4),
404         /* TOC addresses are in BCD. */
405         IDE_AFLAG_TOCADDR_AS_BCD        = (1 << 5),
406         /* TOC track numbers are in BCD. */
407         IDE_AFLAG_TOCTRACKS_AS_BCD      = (1 << 6),
408         /*
409          * Drive does not provide data in multiples of SECTOR_SIZE
410          * when more than one interrupt is needed.
411          */
412         IDE_AFLAG_LIMIT_NFRAMES         = (1 << 7),
413         /* Seeking in progress. */
414         IDE_AFLAG_SEEKING               = (1 << 8),
415         /* Saved TOC information is current. */
416         IDE_AFLAG_TOC_VALID             = (1 << 9),
417         /* We think that the drive door is locked. */
418         IDE_AFLAG_DOOR_LOCKED           = (1 << 10),
419         /* SET_CD_SPEED command is unsupported. */
420         IDE_AFLAG_NO_SPEED_SELECT       = (1 << 11),
421         IDE_AFLAG_VERTOS_300_SSD        = (1 << 12),
422         IDE_AFLAG_VERTOS_600_ESD        = (1 << 13),
423         IDE_AFLAG_SANYO_3CD             = (1 << 14),
424         IDE_AFLAG_FULL_CAPS_PAGE        = (1 << 15),
425         IDE_AFLAG_PLAY_AUDIO_OK         = (1 << 16),
426         IDE_AFLAG_LE_SPEED_FIELDS       = (1 << 17),
427
428         /* ide-floppy */
429         /* Format in progress */
430         IDE_AFLAG_FORMAT_IN_PROGRESS    = (1 << 18),
431         /* Avoid commands not supported in Clik drive */
432         IDE_AFLAG_CLIK_DRIVE            = (1 << 19),
433         /* Requires BH algorithm for packets */
434         IDE_AFLAG_ZIP_DRIVE             = (1 << 20),
435         /* Write protect */
436         IDE_AFLAG_WP                    = (1 << 21),
437         /* Supports format progress report */
438         IDE_AFLAG_SRFP                  = (1 << 22),
439
440         /* ide-tape */
441         IDE_AFLAG_IGNORE_DSC            = (1 << 23),
442         /* 0 When the tape position is unknown */
443         IDE_AFLAG_ADDRESS_VALID         = (1 << 24),
444         /* Device already opened */
445         IDE_AFLAG_BUSY                  = (1 << 25),
446         /* Attempt to auto-detect the current user block size */
447         IDE_AFLAG_DETECT_BS             = (1 << 26),
448         /* Currently on a filemark */
449         IDE_AFLAG_FILEMARK              = (1 << 27),
450         /* 0 = no tape is loaded, so we don't rewind after ejecting */
451         IDE_AFLAG_MEDIUM_PRESENT        = (1 << 28),
452
453         IDE_AFLAG_NO_AUTOCLOSE          = (1 << 29),
454 };
455
456 /* device flags */
457 enum {
458         /* restore settings after device reset */
459         IDE_DFLAG_KEEP_SETTINGS         = (1 << 0),
460         /* device is using DMA for read/write */
461         IDE_DFLAG_USING_DMA             = (1 << 1),
462         /* okay to unmask other IRQs */
463         IDE_DFLAG_UNMASK                = (1 << 2),
464         /* don't attempt flushes */
465         IDE_DFLAG_NOFLUSH               = (1 << 3),
466         /* DSC overlap */
467         IDE_DFLAG_DSC_OVERLAP           = (1 << 4),
468         /* give potential excess bandwidth */
469         IDE_DFLAG_NICE1                 = (1 << 5),
470         /* device is physically present */
471         IDE_DFLAG_PRESENT               = (1 << 6),
472         /* device ejected hint */
473         IDE_DFLAG_DEAD                  = (1 << 7),
474         /* id read from device (synthetic if not set) */
475         IDE_DFLAG_ID_READ               = (1 << 8),
476         IDE_DFLAG_NOPROBE               = (1 << 9),
477         /* need to do check_media_change() */
478         IDE_DFLAG_REMOVABLE             = (1 << 10),
479         /* needed for removable devices */
480         IDE_DFLAG_ATTACH                = (1 << 11),
481         IDE_DFLAG_FORCED_GEOM           = (1 << 12),
482         /* disallow setting unmask bit */
483         IDE_DFLAG_NO_UNMASK             = (1 << 13),
484         /* disallow enabling 32-bit I/O */
485         IDE_DFLAG_NO_IO_32BIT           = (1 << 14),
486         /* for removable only: door lock/unlock works */
487         IDE_DFLAG_DOORLOCKING           = (1 << 15),
488         /* disallow DMA */
489         IDE_DFLAG_NODMA                 = (1 << 16),
490         /* powermanagment told us not to do anything, so sleep nicely */
491         IDE_DFLAG_BLOCKED               = (1 << 17),
492         /* ide-scsi emulation */
493         IDE_DFLAG_SCSI                  = (1 << 18),
494         /* sleeping & sleep field valid */
495         IDE_DFLAG_SLEEPING              = (1 << 19),
496         IDE_DFLAG_POST_RESET            = (1 << 20),
497         IDE_DFLAG_UDMA33_WARNED         = (1 << 21),
498         IDE_DFLAG_LBA48                 = (1 << 22),
499         /* status of write cache */
500         IDE_DFLAG_WCACHE                = (1 << 23),
501         /* used for ignoring ATA_DF */
502         IDE_DFLAG_NOWERR                = (1 << 24),
503         /* retrying in PIO */
504         IDE_DFLAG_DMA_PIO_RETRY         = (1 << 25),
505 };
506
507 struct ide_drive_s {
508         char            name[4];        /* drive name, such as "hda" */
509         char            driver_req[10]; /* requests specific driver */
510
511         struct request_queue    *queue; /* request queue */
512
513         struct request          *rq;    /* current request */
514         struct ide_drive_s      *next;  /* circular list of hwgroup drives */
515         void            *driver_data;   /* extra driver data */
516         u16                     *id;    /* identification info */
517 #ifdef CONFIG_IDE_PROC_FS
518         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
519         const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
520 #endif
521         struct hwif_s           *hwif;  /* actually (ide_hwif_t *) */
522
523         unsigned long dev_flags;
524
525         unsigned long sleep;            /* sleep until this time */
526         unsigned long service_start;    /* time we started last request */
527         unsigned long service_time;     /* service time of last request */
528         unsigned long timeout;          /* max time to wait for irq */
529
530         special_t       special;        /* special action flags */
531         select_t        select;         /* basic drive/head select reg value */
532
533         u8      retry_pio;              /* retrying dma capable host in pio */
534         u8      waiting_for_dma;        /* dma currently in progress */
535
536         u8      quirk_list;     /* considered quirky, set for a specific host */
537         u8      init_speed;     /* transfer rate set at boot */
538         u8      current_speed;  /* current transfer rate set */
539         u8      desired_speed;  /* desired transfer rate set */
540         u8      dn;             /* now wide spread use */
541         u8      acoustic;       /* acoustic management */
542         u8      media;          /* disk, cdrom, tape, floppy, ... */
543         u8      ready_stat;     /* min status value for drive ready */
544         u8      mult_count;     /* current multiple sector setting */
545         u8      mult_req;       /* requested multiple sector setting */
546         u8      tune_req;       /* requested drive tuning setting */
547         u8      io_32bit;       /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
548         u8      bad_wstat;      /* used for ignoring ATA_DF */
549         u8      head;           /* "real" number of heads */
550         u8      sect;           /* "real" sectors per track */
551         u8      bios_head;      /* BIOS/fdisk/LILO number of heads */
552         u8      bios_sect;      /* BIOS/fdisk/LILO sectors per track */
553
554         /* delay this long before sending packet command */
555         u8 pc_delay;
556
557         unsigned int    bios_cyl;       /* BIOS/fdisk/LILO number of cyls */
558         unsigned int    cyl;            /* "real" number of cyls */
559         unsigned int    drive_data;     /* used by set_pio_mode/selectproc */
560         unsigned int    failures;       /* current failure count */
561         unsigned int    max_failures;   /* maximum allowed failure count */
562         u64             probed_capacity;/* initial reported media capacity (ide-cd only currently) */
563
564         u64             capacity64;     /* total number of sectors */
565
566         int             lun;            /* logical unit */
567         int             crc_count;      /* crc counter to reduce drive speed */
568
569         unsigned long   debug_mask;     /* debugging levels switch */
570
571 #ifdef CONFIG_BLK_DEV_IDEACPI
572         struct ide_acpi_drive_link *acpidata;
573 #endif
574         struct list_head list;
575         struct device   gendev;
576         struct completion gendev_rel_comp;      /* to deal with device release() */
577
578         /* current packet command */
579         struct ide_atapi_pc *pc;
580
581         /* callback for packet commands */
582         void (*pc_callback)(struct ide_drive_s *, int);
583
584         void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *);
585         int  (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *,
586                               unsigned int, int);
587
588         unsigned long atapi_flags;
589
590         struct ide_atapi_pc request_sense_pc;
591         struct request request_sense_rq;
592 };
593
594 typedef struct ide_drive_s ide_drive_t;
595
596 #define to_ide_device(dev)              container_of(dev, ide_drive_t, gendev)
597
598 #define to_ide_drv(obj, cont_type)      \
599         container_of(obj, struct cont_type, kref)
600
601 #define ide_drv_g(disk, cont_type)      \
602         container_of((disk)->private_data, struct cont_type, driver)
603
604 struct ide_task_s;
605 struct ide_port_info;
606
607 struct ide_tp_ops {
608         void    (*exec_command)(struct hwif_s *, u8);
609         u8      (*read_status)(struct hwif_s *);
610         u8      (*read_altstatus)(struct hwif_s *);
611         u8      (*read_sff_dma_status)(struct hwif_s *);
612
613         void    (*set_irq)(struct hwif_s *, int);
614
615         void    (*tf_load)(ide_drive_t *, struct ide_task_s *);
616         void    (*tf_read)(ide_drive_t *, struct ide_task_s *);
617
618         void    (*input_data)(ide_drive_t *, struct request *, void *,
619                               unsigned int);
620         void    (*output_data)(ide_drive_t *, struct request *, void *,
621                                unsigned int);
622 };
623
624 extern const struct ide_tp_ops default_tp_ops;
625
626 /**
627  * struct ide_port_ops - IDE port operations
628  *
629  * @init_dev:           host specific initialization of a device
630  * @set_pio_mode:       routine to program host for PIO mode
631  * @set_dma_mode:       routine to program host for DMA mode
632  * @selectproc:         tweaks hardware to select drive
633  * @reset_poll:         chipset polling based on hba specifics
634  * @pre_reset:          chipset specific changes to default for device-hba resets
635  * @resetproc:          routine to reset controller after a disk reset
636  * @maskproc:           special host masking for drive selection
637  * @quirkproc:          check host's drive quirk list
638  *
639  * @mdma_filter:        filter MDMA modes
640  * @udma_filter:        filter UDMA modes
641  *
642  * @cable_detect:       detect cable type
643  */
644 struct ide_port_ops {
645         void    (*init_dev)(ide_drive_t *);
646         void    (*set_pio_mode)(ide_drive_t *, const u8);
647         void    (*set_dma_mode)(ide_drive_t *, const u8);
648         void    (*selectproc)(ide_drive_t *);
649         int     (*reset_poll)(ide_drive_t *);
650         void    (*pre_reset)(ide_drive_t *);
651         void    (*resetproc)(ide_drive_t *);
652         void    (*maskproc)(ide_drive_t *, int);
653         void    (*quirkproc)(ide_drive_t *);
654
655         u8      (*mdma_filter)(ide_drive_t *);
656         u8      (*udma_filter)(ide_drive_t *);
657
658         u8      (*cable_detect)(struct hwif_s *);
659 };
660
661 struct ide_dma_ops {
662         void    (*dma_host_set)(struct ide_drive_s *, int);
663         int     (*dma_setup)(struct ide_drive_s *);
664         void    (*dma_exec_cmd)(struct ide_drive_s *, u8);
665         void    (*dma_start)(struct ide_drive_s *);
666         int     (*dma_end)(struct ide_drive_s *);
667         int     (*dma_test_irq)(struct ide_drive_s *);
668         void    (*dma_lost_irq)(struct ide_drive_s *);
669         void    (*dma_timeout)(struct ide_drive_s *);
670 };
671
672 struct ide_host;
673
674 typedef struct hwif_s {
675         struct hwif_s *next;            /* for linked-list in ide_hwgroup_t */
676         struct hwif_s *mate;            /* other hwif from same PCI chip */
677         struct hwgroup_s *hwgroup;      /* actually (ide_hwgroup_t *) */
678         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
679
680         struct ide_host *host;
681
682         char name[6];                   /* name of interface, eg. "ide0" */
683
684         struct ide_io_ports     io_ports;
685
686         unsigned long   sata_scr[SATA_NR_PORTS];
687
688         ide_drive_t     drives[MAX_DRIVES];     /* drive info */
689
690         u8 major;       /* our major number */
691         u8 index;       /* 0 for ide0; 1 for ide1; ... */
692         u8 channel;     /* for dual-port chips: 0=primary, 1=secondary */
693
694         u32 host_flags;
695
696         u8 pio_mask;
697
698         u8 ultra_mask;
699         u8 mwdma_mask;
700         u8 swdma_mask;
701
702         u8 cbl;         /* cable type */
703
704         hwif_chipset_t chipset; /* sub-module for tuning.. */
705
706         struct device *dev;
707
708         ide_ack_intr_t *ack_intr;
709
710         void (*rw_disk)(ide_drive_t *, struct request *);
711
712         const struct ide_tp_ops         *tp_ops;
713         const struct ide_port_ops       *port_ops;
714         const struct ide_dma_ops        *dma_ops;
715
716         void (*ide_dma_clear_irq)(ide_drive_t *drive);
717
718         /* dma physical region descriptor table (cpu view) */
719         unsigned int    *dmatable_cpu;
720         /* dma physical region descriptor table (dma view) */
721         dma_addr_t      dmatable_dma;
722         /* Scatter-gather list used to build the above */
723         struct scatterlist *sg_table;
724         int sg_max_nents;               /* Maximum number of entries in it */
725         int sg_nents;                   /* Current number of entries in it */
726         int sg_dma_direction;           /* dma transfer direction */
727
728         /* data phase of the active command (currently only valid for PIO/DMA) */
729         int             data_phase;
730
731         unsigned int nsect;
732         unsigned int nleft;
733         struct scatterlist *cursg;
734         unsigned int cursg_ofs;
735
736         int             rqsize;         /* max sectors per request */
737         int             irq;            /* our irq number */
738
739         unsigned long   dma_base;       /* base addr for dma ports */
740
741         unsigned long   config_data;    /* for use by chipset-specific code */
742         unsigned long   select_data;    /* for use by chipset-specific code */
743
744         unsigned long   extra_base;     /* extra addr for dma ports */
745         unsigned        extra_ports;    /* number of extra dma ports */
746
747         unsigned        present    : 1; /* this interface exists */
748         unsigned        serialized : 1; /* serialized all channel operation */
749         unsigned        sharing_irq: 1; /* 1 = sharing irq with another hwif */
750         unsigned        sg_mapped  : 1; /* sg_table and sg_nents are ready */
751
752         struct device           gendev;
753         struct device           *portdev;
754
755         struct completion gendev_rel_comp; /* To deal with device release() */
756
757         void            *hwif_data;     /* extra hwif data */
758
759         unsigned dma;
760
761 #ifdef CONFIG_BLK_DEV_IDEACPI
762         struct ide_acpi_hwif_link *acpidata;
763 #endif
764 } ____cacheline_internodealigned_in_smp ide_hwif_t;
765
766 struct ide_host {
767         ide_hwif_t      *ports[MAX_HWIFS];
768         unsigned int    n_ports;
769         struct device   *dev[2];
770         unsigned int    (*init_chipset)(struct pci_dev *);
771         unsigned long   host_flags;
772         void            *host_priv;
773 };
774
775 /*
776  *  internal ide interrupt handler type
777  */
778 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
779 typedef int (ide_expiry_t)(ide_drive_t *);
780
781 /* used by ide-cd, ide-floppy, etc. */
782 typedef void (xfer_func_t)(ide_drive_t *, struct request *rq, void *, unsigned);
783
784 typedef struct hwgroup_s {
785                 /* irq handler, if active */
786         ide_startstop_t (*handler)(ide_drive_t *);
787
788                 /* BOOL: protects all fields below */
789         volatile int busy;
790                 /* BOOL: wake us up on timer expiry */
791         unsigned int sleeping   : 1;
792                 /* BOOL: polling active & poll_timeout field valid */
793         unsigned int polling    : 1;
794
795                 /* current drive */
796         ide_drive_t *drive;
797                 /* ptr to current hwif in linked-list */
798         ide_hwif_t *hwif;
799
800                 /* current request */
801         struct request *rq;
802
803                 /* failsafe timer */
804         struct timer_list timer;
805                 /* timeout value during long polls */
806         unsigned long poll_timeout;
807                 /* queried upon timeouts */
808         int (*expiry)(ide_drive_t *);
809
810         int req_gen;
811         int req_gen_timer;
812 } ide_hwgroup_t;
813
814 typedef struct ide_driver_s ide_driver_t;
815
816 extern struct mutex ide_setting_mtx;
817
818 /*
819  * configurable drive settings
820  */
821
822 #define DS_SYNC (1 << 0)
823
824 struct ide_devset {
825         int             (*get)(ide_drive_t *);
826         int             (*set)(ide_drive_t *, int);
827         unsigned int    flags;
828 };
829
830 #define __DEVSET(_flags, _get, _set) { \
831         .flags  = _flags, \
832         .get    = _get, \
833         .set    = _set, \
834 }
835
836 #define ide_devset_get(name, field) \
837 static int get_##name(ide_drive_t *drive) \
838 { \
839         return drive->field; \
840 }
841
842 #define ide_devset_set(name, field) \
843 static int set_##name(ide_drive_t *drive, int arg) \
844 { \
845         drive->field = arg; \
846         return 0; \
847 }
848
849 #define ide_devset_get_flag(name, flag) \
850 static int get_##name(ide_drive_t *drive) \
851 { \
852         return !!(drive->dev_flags & flag); \
853 }
854
855 #define ide_devset_set_flag(name, flag) \
856 static int set_##name(ide_drive_t *drive, int arg) \
857 { \
858         if (arg) \
859                 drive->dev_flags |= flag; \
860         else \
861                 drive->dev_flags &= ~flag; \
862         return 0; \
863 }
864
865 #define __IDE_DEVSET(_name, _flags, _get, _set) \
866 const struct ide_devset ide_devset_##_name = \
867         __DEVSET(_flags, _get, _set)
868
869 #define IDE_DEVSET(_name, _flags, _get, _set) \
870 static __IDE_DEVSET(_name, _flags, _get, _set)
871
872 #define ide_devset_rw(_name, _func) \
873 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
874
875 #define ide_devset_w(_name, _func) \
876 IDE_DEVSET(_name, 0, NULL, set_##_func)
877
878 #define ide_devset_rw_sync(_name, _func) \
879 IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
880
881 #define ide_decl_devset(_name) \
882 extern const struct ide_devset ide_devset_##_name
883
884 ide_decl_devset(io_32bit);
885 ide_decl_devset(keepsettings);
886 ide_decl_devset(pio_mode);
887 ide_decl_devset(unmaskirq);
888 ide_decl_devset(using_dma);
889
890 #ifdef CONFIG_IDE_PROC_FS
891 /*
892  * /proc/ide interface
893  */
894
895 #define ide_devset_rw_field(_name, _field) \
896 ide_devset_get(_name, _field); \
897 ide_devset_set(_name, _field); \
898 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
899
900 #define ide_devset_rw_flag(_name, _field) \
901 ide_devset_get_flag(_name, _field); \
902 ide_devset_set_flag(_name, _field); \
903 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
904
905 struct ide_proc_devset {
906         const char              *name;
907         const struct ide_devset *setting;
908         int                     min, max;
909         int                     (*mulf)(ide_drive_t *);
910         int                     (*divf)(ide_drive_t *);
911 };
912
913 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
914         .name = __stringify(_name), \
915         .setting = &ide_devset_##_name, \
916         .min = _min, \
917         .max = _max, \
918         .mulf = _mulf, \
919         .divf = _divf, \
920 }
921
922 #define IDE_PROC_DEVSET(_name, _min, _max) \
923 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
924
925 typedef struct {
926         const char      *name;
927         mode_t          mode;
928         read_proc_t     *read_proc;
929         write_proc_t    *write_proc;
930 } ide_proc_entry_t;
931
932 void proc_ide_create(void);
933 void proc_ide_destroy(void);
934 void ide_proc_register_port(ide_hwif_t *);
935 void ide_proc_port_register_devices(ide_hwif_t *);
936 void ide_proc_unregister_device(ide_drive_t *);
937 void ide_proc_unregister_port(ide_hwif_t *);
938 void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
939 void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
940
941 read_proc_t proc_ide_read_capacity;
942 read_proc_t proc_ide_read_geometry;
943
944 /*
945  * Standard exit stuff:
946  */
947 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
948 {                                       \
949         len -= off;                     \
950         if (len < count) {              \
951                 *eof = 1;               \
952                 if (len <= 0)           \
953                         return 0;       \
954         } else                          \
955                 len = count;            \
956         *start = page + off;            \
957         return len;                     \
958 }
959 #else
960 static inline void proc_ide_create(void) { ; }
961 static inline void proc_ide_destroy(void) { ; }
962 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
963 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
964 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
965 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
966 static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
967 static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
968 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
969 #endif
970
971 enum {
972         /* enter/exit functions */
973         IDE_DBG_FUNC =                  (1 << 0),
974         /* sense key/asc handling */
975         IDE_DBG_SENSE =                 (1 << 1),
976         /* packet commands handling */
977         IDE_DBG_PC =                    (1 << 2),
978         /* request handling */
979         IDE_DBG_RQ =                    (1 << 3),
980         /* driver probing/setup */
981         IDE_DBG_PROBE =                 (1 << 4),
982 };
983
984 /* DRV_NAME has to be defined in the driver before using the macro below */
985 #define __ide_debug_log(lvl, fmt, args...)                      \
986 {                                                               \
987         if (unlikely(drive->debug_mask & lvl))                  \
988                 printk(KERN_INFO DRV_NAME ": " fmt, ## args);   \
989 }
990
991 /*
992  * Power Management step value (rq->pm->pm_step).
993  *
994  * The step value starts at 0 (ide_pm_state_start_suspend) for a
995  * suspend operation or 1000 (ide_pm_state_start_resume) for a
996  * resume operation.
997  *
998  * For each step, the core calls the subdriver start_power_step() first.
999  * This can return:
1000  *      - ide_stopped : In this case, the core calls us back again unless
1001  *                      step have been set to ide_power_state_completed.
1002  *      - ide_started : In this case, the channel is left busy until an
1003  *                      async event (interrupt) occurs.
1004  * Typically, start_power_step() will issue a taskfile request with
1005  * do_rw_taskfile().
1006  *
1007  * Upon reception of the interrupt, the core will call complete_power_step()
1008  * with the error code if any. This routine should update the step value
1009  * and return. It should not start a new request. The core will call
1010  * start_power_step for the new step value, unless step have been set to
1011  * ide_power_state_completed.
1012  *
1013  * Subdrivers are expected to define their own additional power
1014  * steps from 1..999 for suspend and from 1001..1999 for resume,
1015  * other values are reserved for future use.
1016  */
1017
1018 enum {
1019         ide_pm_state_completed          = -1,
1020         ide_pm_state_start_suspend      = 0,
1021         ide_pm_state_start_resume       = 1000,
1022 };
1023
1024 /*
1025  * Subdrivers support.
1026  *
1027  * The gendriver.owner field should be set to the module owner of this driver.
1028  * The gendriver.name field should be set to the name of this driver
1029  */
1030 struct ide_driver_s {
1031         const char                      *version;
1032         ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1033         int             (*end_request)(ide_drive_t *, int, int);
1034         ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
1035         struct device_driver    gen_driver;
1036         int             (*probe)(ide_drive_t *);
1037         void            (*remove)(ide_drive_t *);
1038         void            (*resume)(ide_drive_t *);
1039         void            (*shutdown)(ide_drive_t *);
1040 #ifdef CONFIG_IDE_PROC_FS
1041         ide_proc_entry_t                *proc;
1042         const struct ide_proc_devset    *settings;
1043 #endif
1044 };
1045
1046 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
1047
1048 int ide_device_get(ide_drive_t *);
1049 void ide_device_put(ide_drive_t *);
1050
1051 struct ide_ioctl_devset {
1052         unsigned int    get_ioctl;
1053         unsigned int    set_ioctl;
1054         const struct ide_devset *setting;
1055 };
1056
1057 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
1058                       unsigned long, const struct ide_ioctl_devset *);
1059
1060 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *,
1061                       unsigned, unsigned long);
1062
1063 extern int ide_vlb_clk;
1064 extern int ide_pci_clk;
1065
1066 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
1067 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
1068                              int uptodate, int nr_sectors);
1069
1070 extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
1071
1072 void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
1073                          ide_expiry_t *);
1074
1075 void ide_execute_pkt_cmd(ide_drive_t *);
1076
1077 void ide_pad_transfer(ide_drive_t *, int, int);
1078
1079 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
1080
1081 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
1082
1083 void ide_fix_driveid(u16 *);
1084
1085 extern void ide_fixstring(u8 *, const int, const int);
1086
1087 int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
1088
1089 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1090
1091 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1092
1093 extern int ide_devset_execute(ide_drive_t *drive,
1094                               const struct ide_devset *setting, int arg);
1095
1096 extern void ide_do_drive_cmd(ide_drive_t *, struct request *);
1097
1098 extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
1099
1100 enum {
1101         IDE_TFLAG_LBA48                 = (1 << 0),
1102         IDE_TFLAG_FLAGGED               = (1 << 2),
1103         IDE_TFLAG_OUT_DATA              = (1 << 3),
1104         IDE_TFLAG_OUT_HOB_FEATURE       = (1 << 4),
1105         IDE_TFLAG_OUT_HOB_NSECT         = (1 << 5),
1106         IDE_TFLAG_OUT_HOB_LBAL          = (1 << 6),
1107         IDE_TFLAG_OUT_HOB_LBAM          = (1 << 7),
1108         IDE_TFLAG_OUT_HOB_LBAH          = (1 << 8),
1109         IDE_TFLAG_OUT_HOB               = IDE_TFLAG_OUT_HOB_FEATURE |
1110                                           IDE_TFLAG_OUT_HOB_NSECT |
1111                                           IDE_TFLAG_OUT_HOB_LBAL |
1112                                           IDE_TFLAG_OUT_HOB_LBAM |
1113                                           IDE_TFLAG_OUT_HOB_LBAH,
1114         IDE_TFLAG_OUT_FEATURE           = (1 << 9),
1115         IDE_TFLAG_OUT_NSECT             = (1 << 10),
1116         IDE_TFLAG_OUT_LBAL              = (1 << 11),
1117         IDE_TFLAG_OUT_LBAM              = (1 << 12),
1118         IDE_TFLAG_OUT_LBAH              = (1 << 13),
1119         IDE_TFLAG_OUT_TF                = IDE_TFLAG_OUT_FEATURE |
1120                                           IDE_TFLAG_OUT_NSECT |
1121                                           IDE_TFLAG_OUT_LBAL |
1122                                           IDE_TFLAG_OUT_LBAM |
1123                                           IDE_TFLAG_OUT_LBAH,
1124         IDE_TFLAG_OUT_DEVICE            = (1 << 14),
1125         IDE_TFLAG_WRITE                 = (1 << 15),
1126         IDE_TFLAG_FLAGGED_SET_IN_FLAGS  = (1 << 16),
1127         IDE_TFLAG_IN_DATA               = (1 << 17),
1128         IDE_TFLAG_CUSTOM_HANDLER        = (1 << 18),
1129         IDE_TFLAG_DMA_PIO_FALLBACK      = (1 << 19),
1130         IDE_TFLAG_IN_HOB_FEATURE        = (1 << 20),
1131         IDE_TFLAG_IN_HOB_NSECT          = (1 << 21),
1132         IDE_TFLAG_IN_HOB_LBAL           = (1 << 22),
1133         IDE_TFLAG_IN_HOB_LBAM           = (1 << 23),
1134         IDE_TFLAG_IN_HOB_LBAH           = (1 << 24),
1135         IDE_TFLAG_IN_HOB_LBA            = IDE_TFLAG_IN_HOB_LBAL |
1136                                           IDE_TFLAG_IN_HOB_LBAM |
1137                                           IDE_TFLAG_IN_HOB_LBAH,
1138         IDE_TFLAG_IN_HOB                = IDE_TFLAG_IN_HOB_FEATURE |
1139                                           IDE_TFLAG_IN_HOB_NSECT |
1140                                           IDE_TFLAG_IN_HOB_LBA,
1141         IDE_TFLAG_IN_FEATURE            = (1 << 1),
1142         IDE_TFLAG_IN_NSECT              = (1 << 25),
1143         IDE_TFLAG_IN_LBAL               = (1 << 26),
1144         IDE_TFLAG_IN_LBAM               = (1 << 27),
1145         IDE_TFLAG_IN_LBAH               = (1 << 28),
1146         IDE_TFLAG_IN_LBA                = IDE_TFLAG_IN_LBAL |
1147                                           IDE_TFLAG_IN_LBAM |
1148                                           IDE_TFLAG_IN_LBAH,
1149         IDE_TFLAG_IN_TF                 = IDE_TFLAG_IN_NSECT |
1150                                           IDE_TFLAG_IN_LBA,
1151         IDE_TFLAG_IN_DEVICE             = (1 << 29),
1152         IDE_TFLAG_HOB                   = IDE_TFLAG_OUT_HOB |
1153                                           IDE_TFLAG_IN_HOB,
1154         IDE_TFLAG_TF                    = IDE_TFLAG_OUT_TF |
1155                                           IDE_TFLAG_IN_TF,
1156         IDE_TFLAG_DEVICE                = IDE_TFLAG_OUT_DEVICE |
1157                                           IDE_TFLAG_IN_DEVICE,
1158         /* force 16-bit I/O operations */
1159         IDE_TFLAG_IO_16BIT              = (1 << 30),
1160         /* ide_task_t was allocated using kmalloc() */
1161         IDE_TFLAG_DYN                   = (1 << 31),
1162 };
1163
1164 struct ide_taskfile {
1165         u8      hob_data;       /*  0: high data byte (for TASKFILE IOCTL) */
1166
1167         u8      hob_feature;    /*  1-5: additional data to support LBA48 */
1168         u8      hob_nsect;
1169         u8      hob_lbal;
1170         u8      hob_lbam;
1171         u8      hob_lbah;
1172
1173         u8      data;           /*  6: low data byte (for TASKFILE IOCTL) */
1174
1175         union {                 /*  7: */
1176                 u8 error;       /*   read:  error */
1177                 u8 feature;     /*  write: feature */
1178         };
1179
1180         u8      nsect;          /*  8: number of sectors */
1181         u8      lbal;           /*  9: LBA low */
1182         u8      lbam;           /* 10: LBA mid */
1183         u8      lbah;           /* 11: LBA high */
1184
1185         u8      device;         /* 12: device select */
1186
1187         union {                 /* 13: */
1188                 u8 status;      /*  read: status  */
1189                 u8 command;     /* write: command */
1190         };
1191 };
1192
1193 typedef struct ide_task_s {
1194         union {
1195                 struct ide_taskfile     tf;
1196                 u8                      tf_array[14];
1197         };
1198         u32                     tf_flags;
1199         int                     data_phase;
1200         struct request          *rq;            /* copy of request */
1201         void                    *special;       /* valid_t generally */
1202 } ide_task_t;
1203
1204 void ide_tf_dump(const char *, struct ide_taskfile *);
1205
1206 void ide_exec_command(ide_hwif_t *, u8);
1207 u8 ide_read_status(ide_hwif_t *);
1208 u8 ide_read_altstatus(ide_hwif_t *);
1209 u8 ide_read_sff_dma_status(ide_hwif_t *);
1210
1211 void ide_set_irq(ide_hwif_t *, int);
1212
1213 void ide_tf_load(ide_drive_t *, ide_task_t *);
1214 void ide_tf_read(ide_drive_t *, ide_task_t *);
1215
1216 void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
1217 void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
1218
1219 int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int);
1220
1221 extern void SELECT_DRIVE(ide_drive_t *);
1222 void SELECT_MASK(ide_drive_t *, int);
1223
1224 u8 ide_read_error(ide_drive_t *);
1225 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1226
1227 extern int drive_is_ready(ide_drive_t *);
1228
1229 void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
1230
1231 int ide_check_atapi_device(ide_drive_t *, const char *);
1232
1233 void ide_init_pc(struct ide_atapi_pc *);
1234
1235 /*
1236  * Special requests for ide-tape block device strategy routine.
1237  *
1238  * In order to service a character device command, we add special requests to
1239  * the tail of our block device request queue and wait for their completion.
1240  */
1241 enum {
1242         REQ_IDETAPE_PC1         = (1 << 0), /* packet command (first stage) */
1243         REQ_IDETAPE_PC2         = (1 << 1), /* packet command (second stage) */
1244         REQ_IDETAPE_READ        = (1 << 2),
1245         REQ_IDETAPE_WRITE       = (1 << 3),
1246 };
1247
1248 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
1249
1250 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
1251 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
1252 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
1253 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
1254 void ide_retry_pc(ide_drive_t *, struct gendisk *);
1255
1256 static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
1257 {
1258         return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
1259 }
1260
1261 int ide_scsi_expiry(ide_drive_t *);
1262
1263 ide_startstop_t ide_issue_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
1264
1265 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1266
1267 void task_end_request(ide_drive_t *, struct request *, u8);
1268
1269 int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
1270 int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
1271
1272 int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1273
1274 extern int ide_driveid_update(ide_drive_t *);
1275 extern int ide_config_drive_speed(ide_drive_t *, u8);
1276 extern u8 eighty_ninty_three (ide_drive_t *);
1277 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1278
1279 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1280
1281 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1282
1283 extern void ide_timer_expiry(unsigned long);
1284 extern irqreturn_t ide_intr(int irq, void *dev_id);
1285 extern void do_ide_request(struct request_queue *);
1286
1287 void ide_init_disk(struct gendisk *, ide_drive_t *);
1288
1289 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1290 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1291 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1292 #else
1293 #define ide_pci_register_driver(d) pci_register_driver(d)
1294 #endif
1295
1296 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
1297                          hw_regs_t *, hw_regs_t **);
1298 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1299
1300 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1301 int ide_pci_set_master(struct pci_dev *, const char *);
1302 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1303 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1304 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1305 #else
1306 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1307                                      const struct ide_port_info *d)
1308 {
1309         return -EINVAL;
1310 }
1311 #endif
1312
1313 typedef struct ide_pci_enablebit_s {
1314         u8      reg;    /* byte pci reg holding the enable-bit */
1315         u8      mask;   /* mask to isolate the enable-bit */
1316         u8      val;    /* value of masked reg when "enabled" */
1317 } ide_pci_enablebit_t;
1318
1319 enum {
1320         /* Uses ISA control ports not PCI ones. */
1321         IDE_HFLAG_ISA_PORTS             = (1 << 0),
1322         /* single port device */
1323         IDE_HFLAG_SINGLE                = (1 << 1),
1324         /* don't use legacy PIO blacklist */
1325         IDE_HFLAG_PIO_NO_BLACKLIST      = (1 << 2),
1326         /* set for the second port of QD65xx */
1327         IDE_HFLAG_QD_2ND_PORT           = (1 << 3),
1328         /* use PIO8/9 for prefetch off/on */
1329         IDE_HFLAG_ABUSE_PREFETCH        = (1 << 4),
1330         /* use PIO6/7 for fast-devsel off/on */
1331         IDE_HFLAG_ABUSE_FAST_DEVSEL     = (1 << 5),
1332         /* use 100-102 and 200-202 PIO values to set DMA modes */
1333         IDE_HFLAG_ABUSE_DMA_MODES       = (1 << 6),
1334         /*
1335          * keep DMA setting when programming PIO mode, may be used only
1336          * for hosts which have separate PIO and DMA timings (ie. PMAC)
1337          */
1338         IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1339         /* program host for the transfer mode after programming device */
1340         IDE_HFLAG_POST_SET_MODE         = (1 << 8),
1341         /* don't program host/device for the transfer mode ("smart" hosts) */
1342         IDE_HFLAG_NO_SET_MODE           = (1 << 9),
1343         /* trust BIOS for programming chipset/device for DMA */
1344         IDE_HFLAG_TRUST_BIOS_FOR_DMA    = (1 << 10),
1345         /* host is CS5510/CS5520 */
1346         IDE_HFLAG_CS5520                = (1 << 11),
1347         /* ATAPI DMA is unsupported */
1348         IDE_HFLAG_NO_ATAPI_DMA          = (1 << 12),
1349         /* set if host is a "non-bootable" controller */
1350         IDE_HFLAG_NON_BOOTABLE          = (1 << 13),
1351         /* host doesn't support DMA */
1352         IDE_HFLAG_NO_DMA                = (1 << 14),
1353         /* check if host is PCI IDE device before allowing DMA */
1354         IDE_HFLAG_NO_AUTODMA            = (1 << 15),
1355         /* host uses MMIO */
1356         IDE_HFLAG_MMIO                  = (1 << 16),
1357         /* no LBA48 */
1358         IDE_HFLAG_NO_LBA48              = (1 << 17),
1359         /* no LBA48 DMA */
1360         IDE_HFLAG_NO_LBA48_DMA          = (1 << 18),
1361         /* data FIFO is cleared by an error */
1362         IDE_HFLAG_ERROR_STOPS_FIFO      = (1 << 19),
1363         /* serialize ports */
1364         IDE_HFLAG_SERIALIZE             = (1 << 20),
1365         /* use legacy IRQs */
1366         IDE_HFLAG_LEGACY_IRQS           = (1 << 21),
1367         /* force use of legacy IRQs */
1368         IDE_HFLAG_FORCE_LEGACY_IRQS     = (1 << 22),
1369         /* limit LBA48 requests to 256 sectors */
1370         IDE_HFLAG_RQSIZE_256            = (1 << 23),
1371         /* use 32-bit I/O ops */
1372         IDE_HFLAG_IO_32BIT              = (1 << 24),
1373         /* unmask IRQs */
1374         IDE_HFLAG_UNMASK_IRQS           = (1 << 25),
1375         /* serialize ports if DMA is possible (for sl82c105) */
1376         IDE_HFLAG_SERIALIZE_DMA         = (1 << 27),
1377         /* force host out of "simplex" mode */
1378         IDE_HFLAG_CLEAR_SIMPLEX         = (1 << 28),
1379         /* DSC overlap is unsupported */
1380         IDE_HFLAG_NO_DSC                = (1 << 29),
1381         /* never use 32-bit I/O ops */
1382         IDE_HFLAG_NO_IO_32BIT           = (1 << 30),
1383         /* never unmask IRQs */
1384         IDE_HFLAG_NO_UNMASK_IRQS        = (1 << 31),
1385 };
1386
1387 #ifdef CONFIG_BLK_DEV_OFFBOARD
1388 # define IDE_HFLAG_OFF_BOARD    0
1389 #else
1390 # define IDE_HFLAG_OFF_BOARD    IDE_HFLAG_NON_BOOTABLE
1391 #endif
1392
1393 struct ide_port_info {
1394         char                    *name;
1395         unsigned int            (*init_chipset)(struct pci_dev *);
1396         void                    (*init_iops)(ide_hwif_t *);
1397         void                    (*init_hwif)(ide_hwif_t *);
1398         int                     (*init_dma)(ide_hwif_t *,
1399                                             const struct ide_port_info *);
1400
1401         const struct ide_tp_ops         *tp_ops;
1402         const struct ide_port_ops       *port_ops;
1403         const struct ide_dma_ops        *dma_ops;
1404
1405         ide_pci_enablebit_t     enablebits[2];
1406         hwif_chipset_t          chipset;
1407         u32                     host_flags;
1408         u8                      pio_mask;
1409         u8                      swdma_mask;
1410         u8                      mwdma_mask;
1411         u8                      udma_mask;
1412 };
1413
1414 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1415 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1416                      const struct ide_port_info *, void *);
1417 void ide_pci_remove(struct pci_dev *);
1418
1419 #ifdef CONFIG_PM
1420 int ide_pci_suspend(struct pci_dev *, pm_message_t);
1421 int ide_pci_resume(struct pci_dev *);
1422 #else
1423 #define ide_pci_suspend NULL
1424 #define ide_pci_resume NULL
1425 #endif
1426
1427 void ide_map_sg(ide_drive_t *, struct request *);
1428 void ide_init_sg_cmd(ide_drive_t *, struct request *);
1429
1430 #define BAD_DMA_DRIVE           0
1431 #define GOOD_DMA_DRIVE          1
1432
1433 struct drive_list_entry {
1434         const char *id_model;
1435         const char *id_firmware;
1436 };
1437
1438 int ide_in_drive_list(u16 *, const struct drive_list_entry *);
1439
1440 #ifdef CONFIG_BLK_DEV_IDEDMA
1441 int __ide_dma_bad_drive(ide_drive_t *);
1442 int ide_id_dma_bug(ide_drive_t *);
1443
1444 u8 ide_find_dma_mode(ide_drive_t *, u8);
1445
1446 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1447 {
1448         return ide_find_dma_mode(drive, XFER_UDMA_6);
1449 }
1450
1451 void ide_dma_off_quietly(ide_drive_t *);
1452 void ide_dma_off(ide_drive_t *);
1453 void ide_dma_on(ide_drive_t *);
1454 int ide_set_dma(ide_drive_t *);
1455 void ide_check_dma_crc(ide_drive_t *);
1456 ide_startstop_t ide_dma_intr(ide_drive_t *);
1457
1458 int ide_build_sglist(ide_drive_t *, struct request *);
1459 void ide_destroy_dmatable(ide_drive_t *);
1460
1461 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1462 extern int ide_build_dmatable(ide_drive_t *, struct request *);
1463 int ide_allocate_dma_engine(ide_hwif_t *);
1464 void ide_release_dma_engine(ide_hwif_t *);
1465
1466 void ide_dma_host_set(ide_drive_t *, int);
1467 extern int ide_dma_setup(ide_drive_t *);
1468 void ide_dma_exec_cmd(ide_drive_t *, u8);
1469 extern void ide_dma_start(ide_drive_t *);
1470 extern int __ide_dma_end(ide_drive_t *);
1471 int ide_dma_test_irq(ide_drive_t *);
1472 extern void ide_dma_lost_irq(ide_drive_t *);
1473 extern void ide_dma_timeout(ide_drive_t *);
1474 extern const struct ide_dma_ops sff_dma_ops;
1475 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1476
1477 #else
1478 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1479 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1480 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1481 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1482 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1483 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1484 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1485 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1486 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1487 #endif /* CONFIG_BLK_DEV_IDEDMA */
1488
1489 #ifndef CONFIG_BLK_DEV_IDEDMA_SFF
1490 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1491 #endif
1492
1493 #ifdef CONFIG_BLK_DEV_IDEACPI
1494 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1495 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1496 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1497 extern void ide_acpi_init(ide_hwif_t *hwif);
1498 void ide_acpi_port_init_devices(ide_hwif_t *);
1499 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1500 #else
1501 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1502 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1503 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1504 static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
1505 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1506 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1507 #endif
1508
1509 void ide_remove_port_from_hwgroup(ide_hwif_t *);
1510 void ide_unregister(ide_hwif_t *);
1511
1512 void ide_register_region(struct gendisk *);
1513 void ide_unregister_region(struct gendisk *);
1514
1515 void ide_undecoded_slave(ide_drive_t *);
1516
1517 void ide_port_apply_params(ide_hwif_t *);
1518
1519 struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
1520 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
1521 void ide_host_free(struct ide_host *);
1522 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1523                       hw_regs_t **);
1524 int ide_host_add(const struct ide_port_info *, hw_regs_t **,
1525                  struct ide_host **);
1526 void ide_host_remove(struct ide_host *);
1527 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1528 void ide_port_unregister_devices(ide_hwif_t *);
1529 void ide_port_scan(ide_hwif_t *);
1530
1531 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1532 {
1533         return hwif->hwif_data;
1534 }
1535
1536 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1537 {
1538         hwif->hwif_data = data;
1539 }
1540
1541 const char *ide_xfer_verbose(u8 mode);
1542 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1543 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1544
1545 u64 ide_get_lba_addr(struct ide_taskfile *, int);
1546 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1547
1548 struct ide_timing {
1549         u8  mode;
1550         u8  setup;      /* t1 */
1551         u16 act8b;      /* t2 for 8-bit io */
1552         u16 rec8b;      /* t2i for 8-bit io */
1553         u16 cyc8b;      /* t0 for 8-bit io */
1554         u16 active;     /* t2 or tD */
1555         u16 recover;    /* t2i or tK */
1556         u16 cycle;      /* t0 */
1557         u16 udma;       /* t2CYCTYP/2 */
1558 };
1559
1560 enum {
1561         IDE_TIMING_SETUP        = (1 << 0),
1562         IDE_TIMING_ACT8B        = (1 << 1),
1563         IDE_TIMING_REC8B        = (1 << 2),
1564         IDE_TIMING_CYC8B        = (1 << 3),
1565         IDE_TIMING_8BIT         = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1566                                   IDE_TIMING_CYC8B,
1567         IDE_TIMING_ACTIVE       = (1 << 4),
1568         IDE_TIMING_RECOVER      = (1 << 5),
1569         IDE_TIMING_CYCLE        = (1 << 6),
1570         IDE_TIMING_UDMA         = (1 << 7),
1571         IDE_TIMING_ALL          = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1572                                   IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1573                                   IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1574 };
1575
1576 struct ide_timing *ide_timing_find_mode(u8);
1577 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1578 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1579                       struct ide_timing *, unsigned int);
1580 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1581
1582 int ide_scan_pio_blacklist(char *);
1583
1584 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1585
1586 int ide_set_pio_mode(ide_drive_t *, u8);
1587 int ide_set_dma_mode(ide_drive_t *, u8);
1588
1589 void ide_set_pio(ide_drive_t *, u8);
1590
1591 static inline void ide_set_max_pio(ide_drive_t *drive)
1592 {
1593         ide_set_pio(drive, 255);
1594 }
1595
1596 extern spinlock_t ide_lock;
1597 extern struct mutex ide_cfg_mtx;
1598 /*
1599  * Structure locking:
1600  *
1601  * ide_cfg_mtx and ide_lock together protect changes to
1602  * ide_hwif_t->{next,hwgroup}
1603  * ide_drive_t->next
1604  *
1605  * ide_hwgroup_t->busy: ide_lock
1606  * ide_hwgroup_t->hwif: ide_lock
1607  * ide_hwif_t->mate: constant, no locking
1608  * ide_drive_t->hwif: constant, no locking
1609  */
1610
1611 #define local_irq_set(flags)    do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
1612
1613 extern struct bus_type ide_bus_type;
1614 extern struct class *ide_port_class;
1615
1616 static inline void ide_dump_identify(u8 *id)
1617 {
1618         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1619 }
1620
1621 static inline int hwif_to_node(ide_hwif_t *hwif)
1622 {
1623         return hwif->dev ? dev_to_node(hwif->dev) : -1;
1624 }
1625
1626 static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
1627 {
1628         ide_drive_t *peer = &drive->hwif->drives[(drive->dn ^ 1) & 1];
1629
1630         return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
1631 }
1632 #endif /* _IDE_H */